Changed my DVD player, added memory and itunes stopped working...

I'm frustrated. I recently added a DVD player to my PC and itunes stopped working properly. It gave me a "Warning: Registry settings used by itunes devices for importing & burning cd & DVD are missing by installing other CD burning software. Please reinstall itunes.".
I uninstalled and installed itunes again using the control panel and I get the EXACT same warning after reboot! Does anyone have a clue as to the problem?
I go to play song in my library and it passes over my selection down the library of many new albums that I installed, and stops on the older album installs and plays only those albums. Very frustrating that they offer no itunes software support.

It gave me a "Warning: Registry settings used by itunes devices for importing & burning cd & DVD are missing by installing other CD burning software. Please reinstall itunes.".
In this context it's almost certainly a device filter conflict in the Registry. The following document would be the best place to turn next:
[iTunes for Windows XP: Troubleshooting CD issues caused by device filters|http://support.apple.com/kb/TS2372]

Similar Messages

I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
Otherwise I´ll go to the Genius Bar to do a checkup.
Good luck!
It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode. This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content.

HT1766 When in Itunes with my iphone connected to my computer I click on my iphone icon and itunes stops working and I have to close itunes, every thing is uptodate?

Hi When I am in Itunes on my Windows 7 computer with my ipone connected (5s latest) it syncs OK I then click on the iphone icon and itunes stops working and I have to close down? all software is latest version? can any one help?

Hello Dowad,
Thank you for the details of the issue you are experiencing when connecting your iPhone to your computer. I found an article with steps you can take if iTunes stops working when you connect your iPhone:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Thank you for using Apple Support Communities.
Best,
Sheila M.

I uploaded the newest version and itunes stopped working!

I uploaded the newest version and itunes stopped working! This on my windows computer at home, can anyone help? Sorry, by not working I mean I click on the icon and itunes starts up - shows me the library screen with all my music on it, says accessing account and then pops up a message saying it has encountered a problem and needs to close. When I say ok, it closes and goes away!

This is CoconutDonuts solution and it worked for me
May 17, 2014 2:44 AM (in response to Kittyinaz)
Just fixed this issue for iTunes for Windows with minimal damage, try:
1. Browse to "C:\Users\<YourUserName>\AppData\Roaming" in Windows Explorer.
2. Rename the "Apple Computer" folder to "Apple Computer-old".
3. Start iTunes
4. Close iTunes
5. Copy the file "iTunesPrefs.xml" from "C:\Users\<YourUserName>\AppData\Roaming\Apple Computer-old\iTunes"
6. Paste the old "iTunesPrefs.xml" into the new "Apple Computer\iTunes" folder iTunes just created (not the one you renamed) under "C:\Users\<YourUserName>\AppData\Roaming\Apple Computer-old\iTunes"
7. Overwrite the new iTunesPrefs.xml with your old copy of the file.
If you don't care about losing your iTunes preferences then you can just do step 2. You can always go back and grab things from the old folder later if you realize you wanted to have your EQ settings, individual track gains, etc...
THIS WORKED FOR ME

Attempting access to store and itunes stops working?

attempting access to store and itunes stops working?

hiya!
you've got a standard 32-bit version. the x64 version has an "x64" mentioned in that screen. for a little more info on that, see:
http://www.ittvis.com/services/techtip.asp?ttid=4040
i was checking, because the error message you were getting was very similar to one folks can get if they've got a problem with their QuickTime on an x64 PC. itunes needs a functioning QT to work correctly, and a broken QT can cause problems with viewing the Music Store too.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

HT2292 I have a 3GS iphone.It was working alright with iTunes.Recently, it was unlocked. After it was unlocked, the iphone is functioning alright but it is not recognized by iTunes and iTunes stops working, when I connect iphone.Any advice please.

I have a 3GS iphone. It was jailbroken and working alright.But I was not able to upgrade its IOS frrom 4.0.1 to higher versions and many applicatopns were not compatible with this version of the IOS. So I decided to do a factory unlocking. From an website, based in Mumbai, I unlocked it. When I check now in different websites from my IMEI number, my iphone is unlocked. So I became happy that I can now upgrade my iphone. But the events turned to be different.When I connected to iTunes, iTunes stopped working and my iphone did not appear in the iTunes. I uninstalled and reinstalled iTunes after cleaning previous registry of all relatedd components like Quicktime, Bejour,Apple software updates and mobile softwares. I also used msconfig to troubleshoot conflicts in software of Windows 7 ultimate but still my iTunes is not working, when I connect the iphone. If I do not connect the iphone, iTunes is working alright. Can any friend give me some advice how to proceed. I do not like comments like Jailbreaking is illegal and should not have been done. Please advice me what should I do right now. Thanking you all and expecting some valuable suggestions from this expert community.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I can't install itunes 10.6 after download I'm getting error code 2324? and itunes stopped working?

After downloading the update package and trying to install it, the installation didn't work with error code 2324, and i can't open itunes on my laptop anymore?

First of, what sort of system have you got. (Right-click My Computer in the start Menu and select properties) There are two flavours of Windows 7 x64 OEM (original equipment manufacture) One is a total x64 system for the OS and all programs. The other runs x64 address space for the OS and x32 address space for programs. I had exactly the same problem with my system and microsoft office. Roll back (using the recovery console to rewrite all the original registry values before you upgraded will give you a clean system for the upgrade). The upgrade itself should recognise the correct upgrade version for you automatically. However, sometimes it fails to do this due to data corruption. Go here- http://www.apple.com/itunes/download/ and manually download what you need. after download Right-click the file and select "properties" and click on "unblock" box in lower right corner. close, Then right click the file again and select "Run as administrator". If u still have problems, reboot into Safe mode. Uninstall itunes. Reboot again to safe mode. Disconnect from internet and disable any 3rd party system watch and antivirus programs. Reinstall itunes, then reboot normally. If the problem still persists run a system diagnostic check using "Problem Reports and Solutions" from in Control Panel. Let me know how you get on.

Why has file sharing between iPad and iTunes stopped working?

After installing the new version of iTunes and Lion my iPad shared files no longer appear in the Shared Files window in the Apps tab. For instance I use Artrage and have imported many of my drawings using iTunes....but now this no longer works. I contacted Artrage and they say that this does not seem to be a problem with specific Apps because they are seeing similar complaints from other people with the same problem but with different Apps. I no longer have access to my Pages document either. Does any one have any tips on how to fix this? Anyone else having the same problem? Thanks.
So to clarify....I connect my iPad. Click my connected iPad tab on the left. Then click the Apps tab along the top. Then I scroll down and see the File Sharing section. I see 4 Apps that allow file sharing. I click Artrage to see files appear on the right hand side. No files are listed. (I have at least 30-50 drawings) I click Pages to access files. 2 files do appear....but not all files. On my iPad I have 3 folders each with more than 4 documents....plus 4 other documents that are not in folders.
Hope this makes sence.

I saw a similar post that had a solution posted. The idea was a corrupted iPad back up. So I deleted my iPad back up and created a new one. This did not work.
I was hoping it would be so easy.

IMessage and FaceTime stops working in iMac after carrier change

Hi all,
I have done a fair bit of googling and had a look at the discussion history here but couldn't find a solution to my problem. Apology if it has been raised and discussed before and I woud appreciate being re-directed to the thread.
I have got iMessage and Face Time running smoothly on my iPad 2 wi-fi, iphone 4S and iMac OX 10.8.4. However, on the day of my changing carrier (17/09/2013), iMessage and FaceTime stopped working on my iMac as well as iPad 2. It can longer recieve or send messages or receive or make Face Time calls. All the settings looked the same - tick mark next to both my Apple ID email and mobile number, and conversation has always been set to start from mobile number on all devices. iMessage and FaceTime continue to work on iphone 4S without any issues. New sim card but same mobile number. I don't worry too much about the iPad. I just want to make it work again on my iMac and appreciate any help anyone can offer.
Steps I have attempted to make iMessage work again (I left Face Time turned off on iphone and iMac during this time)
0) I disabled/removed Bonjour (GTalk) in iMessage setting in iMac
1) I have turned off iMessage and FaceTime on all devices and swtiched iMessage only back on in iphone 4S first and then iMac. I got the message on my iphone that the iMac will start using the mobile number and Apple ID to send iMessages. However, iMac still fails to send or receive messages.
2) I have updated Apple ID on the web (removed the phone number, saved, and then re-entered phone number assoicated with Apple ID). Then repeat #1
3) I have tried changing "start new conversation from Apple ID email" across all devices - did not resolve anything
4) I have added a friend's Apple ID in iMessage on my iMac -mobile number automatically appeared and tick marks for both her mobile and Apple ID email but unable to send or recieve messages still while it continues to work from her iphone
5) I have also done a PRAM reset - I got the 2 chimes - did not resolve the issue
There's a clear trigger for this problem - change of carrier but I don't understand why it is affecting the iMac (and ipad) but not the iphone itself. Does anyone have any ideas what I can do about it?
Thanks for your help in advance.

Hi,
At the OS X 10.8.2 update things regarding the iMessages Account's login were changed.
It now requires that the Mac's Serial Number is held in the Memory for it on the Logic Board.
It can get missed in Refurbishments and Repairs.
This is used to generate the Auth-Token for your Apple ID in the Keychain.
Go to Application/Utilities and open Keychain Access.
In the Login Keychain look for "IDS: (Your Apple ID)-AuthToken"
Double clicking this will open the Info Panel.
Check the Access tab and make sure it is either allowing Any App or lists Messages, IMCore and those in this pic.
Although it is know that the Mac has to list the Serial Number it is not clear if other info is needed.
It is possible that it also refers to your Public IP address in some way, this would seem unlikely as most people's ISP issued IP address is from a DHCP server - you basically keep the same IP as you are "Always On" between the router and the ISP but it can change.
If it is not allowing access then change the settings.
There are also two .plists that contain the word imessages
One of these refers to the server you connect to.
com.apple.imservice.iMessage.plist contains the Info you have in the Preferences of Messages (Apple ID, Linked iPhone Numbers and any additional emails)
com.apple.imessage.bag.plist contains which server at iMessages you connect to.
I would try deleting (drag to Trash) the second of these and then restarting Messages.
If that does not work Quit Messages and delete the AuthToken for your Apple ID (if the AuthToken appeared to be allowing access above.)
Restart Messages.
8:03 pm Sunday; September 22, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Itunes stop working..When add file to library and synch it to ibook

using itunes to transfer files from my PC (using windows & 64 bit) to my IPad (Ipad 2).. and itunes stop working when i add files to library
this is the error
Description
Faulting Application Path:          C:\Program Files (x86)\iTunes\iTunes.exe
Problem signature
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.6.3.25
Application Timestamp:          4fd16377
Fault Module Name:          ntdll.dll
Fault Module Version:          6.1.7601.17725
Fault Module Timestamp:          4ec49b8f
Exception Code:          c0000005
Exception Offset:          0002e3be
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1057
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789
Extra information about the problem
Bucket ID:          3016475220
anybody could give suggestion

This windows report for this error
Description
Faulting Application Path:          C:\Program Files (x86)\iTunes\iTunes.exe
Problem signature
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.6.3.25
Application Timestamp:          4fd16377
Fault Module Name:          ntdll.dll
Fault Module Version:          6.1.7601.17725
Fault Module Timestamp:          4ec49b8f
Exception Code:          c0000005
Exception Offset:          0002e3be
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1057
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789
Extra information about the problem
Bucket ID:          3016475220
anybody could give suggestion

Itunes doesn't play certain songs and just stops working

it was fine a couple of weeks ago but now it just doesn't play some songs and whenever I doule click those songs it went straight to "Itunes has stopped working." and I have to close the program. Today I just bought a song from Itunes store and it doesn't play either and Itunes stops working as well!!
Please help. this is so annoying.

@ King-Penguin -- no, they don't and that seems to be the problem, thanks!
Why are the ticks important, and do you know how I can tick my entire collection?
Richard

ITunes stops working when labelling CD's, iTunes stops working when labelling CD's

I am using iTunes version 10.5.0.142 with Windows7. I recently attempted to load some audio CDs into iTunes, unsurprisingly 'gracenotes' could not find the track titles and so I went to label the tracks myself. I right-clicked on the device (audio CD) shown on the listing on the left and right-clicked, and selected 'Get Info' from the pop-up box - this invites you to label all the tracks with the artist, book-title etc. As soon as I attempted to input the artist name - the screen froze and iTunes stopped working, a box instructs you to cancel and you are kicked out!
Curiously if you click on each track and select 'Get Info' it allows you to enter all the information track by track and I can successfully import the CD. But what a tedious process with 25 tracks per CD!
I think this is a software error - hopefully fixed with the next version, but has anybody else experienced this problem?

Thanks for responding.
I have found a way around the problem. Import the CD without the information, then find the tracks in the 'music' Library folder and label them 'en bloc' there (click on the first and last track with the 'shift' key depressed) It will ask you if you want to label multiple tracks say yes.
Hope it works for you too!

Itunes stops working when as soon as iphone connected

My iphone syncs perfectly but my wife's iphone immediately starts syncing and itunes stops working. any ideas?

I have reset the phone, reinstalled itunes, deauthorized and then authorized my computer and held down the top button and the main button to reboot. Oh, and I also ran diagnostics from the advanced tab. While the diagnostics was running, I was able to plug the phone in without itunes shutting down. As soon as I ended the diagnostics, the phone began to sync and a message appeared saying "itunes has stopped working"

Itunes stopped working optimising photos

trying to sync photos, itunes starts to optimise photos, gets near enough all the way and Itunes stopped working displayed.
uninstalled itunes and re installed, still same issue

a mi me pasa lo mismo con la diferencia que cuando desmarco el item de incluir videos se concreta la sincronizacion, pero no se me sincronizon los vide.. hasta lo eh actualizado iTunes pero persiste el promema.. solucion por favorr

Why does itunes stop working when I try to watch videos

When I try to watch videos on my pc and itunes stop working. Why is this happening?

Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Changed my DVD player, added memory and itunes stopped working...

Similar Messages

Maybe you are looking for