Changed My HDD Password and now it says it is not correct

I changed my HDD password and now it says it is not correct and will not key my laptop startup.  The previous password does not work either!  Help Please!
Dell Latitude E6530
Have all this info available if needed
Service Tag, Hard Drive #, Asset Tag #, Computer System #
THANK YOU

Hi Leanna82,
You'll need to contact Dell and provide proof of ownership for help with a hard drive password issue.
Good luck!

Similar Messages

  • HT4061 i've blocked iphone 5 with password, and now it says that is not the correct one. how can i unlock it? or restore it?

    i've blocked iphone 5 with password, and now it says that is not the correct one. how can i unlock it? or restore it?

    Hi there itiago,
    I would recommend that you take a look at the article below for more information on forgotten passcodes in iOS.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Hope that helps,
    Griff W.

  • I changed my Apple password, and now one of the iPhones on my account cannot do FaceTime.  It says that it has to be activated....help, my grand daughter is going to assassinate me!!!

    I changed my Apple password, and now one of the iPhones on my account cannot do FaceTime.  It says that it has to be activated....help, my grand daughter is going to assassinate me!!!

    Yes. I have tried that. When I use the ID I had before, it sets it up as a new account and I don't want to lose my stats attached to my old account.
    Let's say that my old nickname was "user10" and I used the email, "[email protected]" for my apple id. I changed my apple id to "[email protected]" and it changed my game center account to "mynew" and somehow I am friends with my old acct, "user10". I tried getting a password reset for "user10" but I apparently don't know my own birthday, which is possible because I usually give a false one, but the same false one each time.

  • I changed my apple password and now FaceTime won't recognize it. Says apple id or password is wrong, what need I do?

    I changed my apple password and now FaceTime won't recognize it. Says apple id or password is wrong, what need I do?

    Hello solarkey,
    Thank you for providing the details of the issue you are experiencing with logging into FaceTime after updating your Apple ID password. 
    First, I recommend toggling FaceTime off and then back on:
    Toggle FaceTime off and on in FaceTime > Preferences.
    Additionally, you can click on your Apple ID in FaceTime > Preferences to sign out and sign in with your new password if you have not entered your new password.
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    If you continue to experiencing sign in issues with FaceTime, I recommend continuing with the following article:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!

    I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I changed my Apple ID and password and now it says the ID has been dissabled, please help

    i need help with ipod touch 2g.  i changed the apple id and password and now it says the id has been dissabled.
    please help.

    Try resetting your passord. See:
    Apple ID: "This Apple ID has been disabled for security reasons" alert appears
    Next contact iTunes
    Apple - Support - iTunes - Contact Us

  • I just had to change my Google password and now my email is not being received on my Iphone 5s --help!!

    I just had to change my Google password and now I am not receiving email on my Iphone 5s--all updates current
    What do I do????

    Did you update your password on your phone?
    ~Lyssa

  • HT4628 I changed my wifi password and now it gives me a warning "A connection timeout occurred" & I can't connect.

    I changed my wifi password and now it gives me a warning "A connection timeout occurred" & I can't connect.

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new Apple ID.

  • I change my gmail password and now i cant see my calendar/notes/etc

    I change my gmail password and now i cant see my calendar/notes

    Hey ANIRAYS,
    Thanks for the question. You may need to update the account settings on your iPhone with the new password. Try navigating to Settings > Mail, Contacts, Calendars then tap on the account and update the password:
    Use multiple calendars - iPhone
    http://help.apple.com/iphone/7/#/iph3d1110d4
    Thanks,
    Matt M.

  • TS1398 Changed my gmail password and now my phone is telling me my password is incorrect

    Changed my gmail password and now my phone is telling me my password is incorrect

    Figured this out. Had to enter an outgoing server password.

  • I accidently changed my ipods password and now i can not get in my ipod what do i do?

    i accidently changed my ipods password and now i can now get in the ipod to listen 2 music etc how do i fix this problem?

    Do as the manual tells you to do in this case and restore the ipod.

  • I just changed my Adobe password and now I am trying to update Adobe flash player - it calls for a password - I just updated it - I use it again to install and it fails ??? What gives?

    I just changed my Adobe password and now I am trying to update Adobe flash player - it calls for a password - I just updated it - I use it again to install and it fails ??? What gives?

    Hi,
    Please see What userid & password do I need to install Flash Player?.
    Maria

  • Just upgraded to iTunes 10.6 and now it says it does not support Quicktime

    Just upgraded to iTunes 10.6 and now it says it does not support Quicktime.  Not much more to add.  It's a MacPro running Lion.

    warren.b.paul wrote:
    So, I have managed to fix the problem.
    I found that the upgrade had replaced my library files with empty ones.
    So I restored the backup I made of them before the upgrade and
    now all my media is back.
    Great..
    For those who run across this therad and haven't taken the effort to make a backup here is another approach that should work.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • My youngest erased all content and settings on my iphone 4s (prepaid) and now it says it is not activated.I still have my account and number,but it says phone number unknown now.How do i fix this?.

    My youngest erased all content and settings on my iphone 4s (prepaid) and now it says it is not activated.I still have my account and number,but it says phone number unknown now.How do i fix this?.

    If you haven't already tried, see if you can force it into recovery mode to restore it:
    http://support.apple.com/kb/ht1808.  If that doesn't work, the last thing you can try is to put it in DFU mode to restore it: https://discussions.apple.com/thread/2648467?threadID=2648467&tstart=0.

  • I tranfserred library to new computer and now itunes says I am not authorized to play the library

    I tranfserred library to new computer and now itunes says I am not authorized to play the library. I have authorized the new computer and it still does not work.

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    Regards.

Maybe you are looking for

  • AIP-11052 Error in B2B

    Hi, We are getting the following error while creating the Business Protocol in B2B. AIP-11052: Writing following objects: User Role Enrollment failed due to following constraint violation: null Same steps is working fine in another instance without a

  • Extension2 in bapi_acc_document_post

    hi, i am posting account documnet in using bapi_acc_document_post with custom feilds on BKPF. so i already append custom structure as Z0CUST01 to BKPF table which contains ZA1, ZA2. when i tried to post, i got no error , document successfully posted,

  • How to delete, change widgets, etc. on My Verizon Central home page

    Hi, Three-quarters of my Verizon Central home page and the Just for Me area is occupied by stuff I have no interest in, such as Entertainment, Sports, Top Movie Videos, etc. I can't find any way to change, deletete or block this stuff to reflect my i

  • Getting Absolute timestamps from FPGA 7831R

    I am using a LIN card in my PXI Chassis. This is not an NI product and it cannot access any triggering lines. The device itself returns an array of timestamped measurements but the problem is that the are relative timestamps. I need to have an absolu

  • Error by deploying application to the WAS

    I use Web Dynpro under SAP NetWeaver Developer Studio to create a small web applocation. As I try to deploy it to the Server I got following error. Who can tell me what's wrong? Result => deployment aborted : file:/C:/DOKUME1/ADMINI1/LOKALE~1/Temp/te