Changed my wifi password and now the printer wont link to computer

 have recently changed my wifi password and since doing so the printer wont connect. I enter the new password and the connection say security key is incorrect?

Here are some links to double check in case you missed something
IOS troubleshooting wifi networks http://support.apple.com/kb/TS1398
router settings http://support.apple.com/kb/HT4199
T/S wifi connections http://support.apple.com/kb/TS1398

Similar Messages

  • HT4628 I changed my wifi password and now it gives me a warning "A connection timeout occurred" & I can't connect.

    I changed my wifi password and now it gives me a warning "A connection timeout occurred" & I can't connect.

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with another Apple ID with a new Apple ID.

  • I recently changed my wifi password and now my iphone4 won't connect to it at all. I've tried the new password and then I changed it back to the old wifi password and it still won't connect. Any solutions?

    I live over seas and I frequently use the Magic Jack app and texting app to call/text home for free and I would like to fix this problem soon so I don't use all my phone data too quickly, please and thank you.

    Here are some links to double check in case you missed something
    IOS troubleshooting wifi networks http://support.apple.com/kb/TS1398
    router settings http://support.apple.com/kb/HT4199
    T/S wifi connections http://support.apple.com/kb/TS1398

  • I changed my Apple password, and now one of the iPhones on my account cannot do FaceTime.  It says that it has to be activated....help, my grand daughter is going to assassinate me!!!

    I changed my Apple password, and now one of the iPhones on my account cannot do FaceTime.  It says that it has to be activated....help, my grand daughter is going to assassinate me!!!

    Yes. I have tried that. When I use the ID I had before, it sets it up as a new account and I don't want to lose my stats attached to my old account.
    Let's say that my old nickname was "user10" and I used the email, "[email protected]" for my apple id. I changed my apple id to "[email protected]" and it changed my game center account to "mynew" and somehow I am friends with my old acct, "user10". I tried getting a password reset for "user10" but I apparently don't know my own birthday, which is possible because I usually give a false one, but the same false one each time.

  • I changed my apple password and now FaceTime won't recognize it. Says apple id or password is wrong, what need I do?

    I changed my apple password and now FaceTime won't recognize it. Says apple id or password is wrong, what need I do?

    Hello solarkey,
    Thank you for providing the details of the issue you are experiencing with logging into FaceTime after updating your Apple ID password. 
    First, I recommend toggling FaceTime off and then back on:
    Toggle FaceTime off and on in FaceTime > Preferences.
    Additionally, you can click on your Apple ID in FaceTime > Preferences to sign out and sign in with your new password if you have not entered your new password.
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    If you continue to experiencing sign in issues with FaceTime, I recommend continuing with the following article:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!

    I changed my ipod password and now when i try to unlock my ipod it says wrong password. Is there anyway i can get into my ipod without restoring it?!?!?!?!?!?!

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I change my gmail password and now i cant see my calendar/notes/etc

    I change my gmail password and now i cant see my calendar/notes

    Hey ANIRAYS,
    Thanks for the question. You may need to update the account settings on your iPhone with the new password. Try navigating to Settings > Mail, Contacts, Calendars then tap on the account and update the password:
    Use multiple calendars - iPhone
    http://help.apple.com/iphone/7/#/iph3d1110d4
    Thanks,
    Matt M.

  • Changed My HDD Password and now it says it is not correct

    I changed my HDD password and now it says it is not correct and will not key my laptop startup.  The previous password does not work either!  Help Please!
    Dell Latitude E6530
    Have all this info available if needed
    Service Tag, Hard Drive #, Asset Tag #, Computer System #
    THANK YOU

    Hi Leanna82,
    You'll need to contact Dell and provide proof of ownership for help with a hard drive password issue.
    Good luck!

  • I accidently changed my ipods password and now i can not get in my ipod what do i do?

    i accidently changed my ipods password and now i can now get in the ipod to listen 2 music etc how do i fix this problem?

    Do as the manual tells you to do in this case and restore the ipod.

  • For some reason the function keys on my mac book changed, I restored them and now the shift keys have the function of showing the desktop and all windows.  I there a way I can restore the original function?

    For some reason the function keys on my mac book changed, I restored them and now the shift keys have the function of showing the desktop and all windows.
    I there a way I can restore the original function?

    You do not tell us what OS version you have. In OS 10.8.2, do this:
    Apple Menu / System Preferences / Language and Text / Input Sources.
    Select the language you want. Mine is set to Canadian English.

  • I just had to change my Google password and now my email is not being received on my Iphone 5s --help!!

    I just had to change my Google password and now I am not receiving email on my Iphone 5s--all updates current
    What do I do????

    Did you update your password on your phone?
    ~Lyssa

  • I downloaded ios 7.02 on the iphone 4 and my phone passcode was changed or wasnt accepted and now the phone is disabled, any suggestions?

    i downloaded ios 7.02 on the iphone 4 and my phone passcode was changed or wasnt accepted and now the phone is disabled, any suggestions?

    any suggestions other than losing all phone info

  • How to change Topic's Icon and show the Print Button

    Hi, currently i'm using robohelp html version 8. I have spent quite some time to figure out how to change topic's Icon and show the Print Button in my project. Anyone can help me on this? Btw, i using MX(template) to generate the output with FlashHelp Pro.
    Below is the screenshot for clearer clarification:
    Thanks.

    We would have told you if there was.
    Sorry but a downside of FlashHelp is that your customising options are limited.
    See www.grainge.org for RoboHelp and Authoring tips
    Follow me @petergrainge

  • TS1398 Changed my gmail password and now my phone is telling me my password is incorrect

    Changed my gmail password and now my phone is telling me my password is incorrect

    Figured this out. Had to enter an outgoing server password.

  • I just changed my Adobe password and now I am trying to update Adobe flash player - it calls for a password - I just updated it - I use it again to install and it fails ??? What gives?

    I just changed my Adobe password and now I am trying to update Adobe flash player - it calls for a password - I just updated it - I use it again to install and it fails ??? What gives?

    Hi,
    Please see What userid & password do I need to install Flash Player?.
    Maria

Maybe you are looking for

  • Custom master page issue only some pages not all (spwebpart manager)

    Hi i am using html custom master page in  sharepoint 2013, In my search page (home)  working properly without any issue, But in my Result.aspx page showing below error.  A WebPartZone can only exist on a page which contains a SPWebPartManager. The SP

  • Downloaded photos from Canon 20D to iPod

    I was not able to get my 20D to downloard to my new iPod. It says unrecognized device. The iPod specs state that Apples Photo Reader Adapter ($35) works with the 20D but I couldn't get it to work. I tried another adapter at the store and got the same

  • Error Code -39 Was Returned By CoreAudio Driver

    Here's the setup: I was recording using my iBook G4 using 10.4.6 and the latest version of GarageBand in iLife 06. I was recording using a mic hooked up to my computer using an iMic. All looked fine when I first hooked it up. I was getting audio out

  • Flash videos showing locally, but not on my site. help please

    Hi, I converted several avi's to flash, I then inserted the FLV file into and html file in dreamweaver. The flash files will play locally, but not when i upload them to web server. Check it out here please http://kdsi.org/kds/demo.html please check t

  • Sync Context index

    I have seen CTX_DDL.SYNC_INDEX ('COMPONENT_CHR_CTX'); and ALTER INDEX COMPONENT_CHR_CTX REBUILD parameters ( ''sync'' ) suggested on this forum. Is there a difference or preferred method!! Rob null