Changed name, now won't display change
I changed the name of my blog from "Blog Test" to simply "Blog" (still playing with iWeb).
But the change won't show up on any of the pages, meaning that "Blog Test" still appears at the top of the Welcome page rather than "Blog".
Any tips to correct this issue? It's not my cache as I've already cleared it, and the problem appears in iWeb as well.
none. No posts were ever made.
Similar Messages
-
IE still works fine. Firefox was great until 30 minutes ago when it so kindly updated itself, and now it won't show me any websites. I've cleared all history, checked the proxy settings, to no avail. Every tab shows (Untitled).
17-Dec-2010 05:47 p.m. CSTYou are welcome.
-
T43 screen upgrade xga - sxga+, now won't display
Hi, So I have a T43 that had an XGA screen, I bought a SXGA from another T43 and connected it. The screen lights up but nothing appears but lines etc, if I re-attache the old XGA, the screens displays normally. What do I need to do? My model num is 1871-4au
T43 with Intel graphics does not support SXGA+ resolution on a 14" LCD. There's not much to do here apart from going back to the original screen.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
My PSE 5.0 Organizer catalog now won't display any new image from the Editor
Every attempt to Save As from the Editor gets the message, "There was a problem acessing the Organizer catalog. It may be in use by another process, or a disc error occurred."
Then when I attempt to get the same image using the FIle menu and Get Photos ...From Files and Folders, even though the newly saved file is correcly in there as shown by the thumbnail, I get this message:
The ODBC data source reported the following error: "[Microsoft][ODBC Microsoft Acess Driver] Cannot open database 'I'. It may not be a database that your application recognizes, or the file may be corrupt."
I have repeatedly shut down the programs and the whole computer, and although this problem occasionally occurred in the past, now that's all I get.
How can I get my Catalog to show these images?Thanks for your suggestion - Recover did it! (That may have seemed obvious to you, but not being much of a computer expert, I didn't know enough to even ask the right question.) I'm so glad to have my Organizer back!
-
My external 1tb My Passport won't display
The eternal displayed this morning, was ejected properly, now won't display other than in Disk Utility, however, it won't allow me to access or eject it.
Thanks Tom! Interestingly enough, everything was set properly. The 1tb icon showed up in my 5 year old MacBook Pro so ... took a 5mb external, plugged it in on new MacBook Pro - it displayed fine - left it plugged in, put the 1tb in and it displayed! Some days ... thanks for the information as I hadn't actually done that.
-
ipod 7th generation. bought it 3 days ago. no problem then but now won't turn on. I keep getting a usb device not recognized (and i keep changing ports to no avail). what to do?
wish i can rmber how mine was fixed i think i just waited tried again and likr magic it worked again left itunplugged, i was like you recently boughtand it happened to me, now i have another diffrent promblem with it.
-
i have selected not to load images automatically in OPTION of firefox, and i want to keep this option as it is. now can i display images of particular page without changing DONT LOAD IMAGE AUTOMATICALLY? for example if i trust that image on particular page doesnot contain any adult material and safe to see that page from home, can i temparory view image on page?
-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to Tools Menu -> Options -> Content -> click '''Exceptions...''' button infront of '''Load images automatically''' -> type the address of the website on which you want to load images e.g. yahoo.com and click '''Allow''' button -> click Close
-> Click OK on Options window -> Restart Firefox
Check and tell if its working. -
D7150 worked fine now won'tprint after blue ink change
D7150 worked fine changed blue ink now won't print anything on page; alignment ok what now????
Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
How are you charging it? its's best charged plugged into the wall not via USB. So if you're trying via USB, try using the supplied power block plugged into the wall. -
Incoming calls and messages with international prefix (e.g. +1) won't display the name of the contact. Those without a prefix do display. Can someone help me figure out why and how to fix it?
check that you dont have that number duplicated in your contacts list. Try deleting the contact and re-entering it. Remember if you solve the problem the messages that are already in the inbox wont change to show the name.
-
Actually it does display the page, but it doesn't display some of the elements which 3.6 did perfectly & even lowly old IE9 still does
Where do I post the 2 screenshots? - the 1 of IE9? & the other of FF15? - which, it should be obvious, isn't displaying the blue lines down the sidescor-el wrote:
Do you know what (CSS) code is responsible for those lines?
After you asked your question, I did some experimentation by varying
the size of the jpg displaying the long blue bar
& came to a startling conclusion
FF15 has changed its ability to display jpgs, if said jpg is even slightly greater
than 30K on its long (vertical) side
You see, the blue bar isn't generated by FF - it's an independent 8x35Kblubx.jpg,
an 8 x 35,000 pixel blue line, which was custom created in a drawing prg
I can send you the file if you want to see it, but the bottom line is,
the old version of FF used to display it perfectly & in virtually any paint type
or jpg display prg (preferably such as IrfanView or ACDSee etc),
it still will, but NOW, in FF15 it doesn't work
Thus whoever's responsible for finalizing the code at Mozilla/FF (whether it's a committee
or a person making a decision for a committee), they've decided some type of jpgs
just won't display, if they're greater than some arbitrary # of pixels
on its long (vertical) side
So, here it is ; even FF15 runs the HTM perfectly, *if* I restrict the 8x35Kblubox.jpg
to its shorter `brother', which is 8x30Kblubox.jpg
Why 30K is acceptable to FF15, but even 30.5K or certainly 34K isn't,
is completely upto whoever's responsible for deciding what will display on FF15
All right, why the change? - Even IE9 still displays the 35Kblubox
& all the way upto 60K & maybe more (I decided 60K was as big as I'd need
at the time they were created), but FF15 jams out at 30.5!
Clearly it's a FF15 `issue' & should be restored to its former ability to run at least 60K
pixel or greater jpgs (along the long upright edge)
frebe -
BP Master Window, Sales Emp Code used to display Sales Empl Name now displ
BP Master Window, Sales Emp Code used to display Sales Empl Name now displays Sales Emp Code
Our customer has noticed that when they do a search in the BP Master window that one of the
columns that is displayed called the Sales Emplyoyee code s not bringing up the Sales Employee Name
as it once was...
I have checked my local version and in the sales employee code column the name of the sales
employee is displayed NOT the code.
sales employee code column is displaying the code number where once it displayed the name and
even in the play system and in our local version it is displaying the name
as above
Nothing has changed on the system. We have not done any upgrades.
I have checked in SAP notes and could not find any information
Thanks for your help in advance
DHi
There is no option for Sales Employee Name.
However on my system if i select Sales Employee Code it actually shows me the Sales Employee Name.
Which is what my customer orginally had .
For my customer it is now showing Sales Employee Code as Sales Employee Code
However it was previously showing Sales Employee Code and giving a Sales Employee Name instead.
They need the Sales Employee Name not Code
Thanks
D -
My email account has disappeared from my iphone4. No longer listed. Tried to set up new email account but now won't accept my user name and or password.
Finally went to the Apple shop where a nice young man explained that I had to use the original password not the recently changed password - case sensitive too - and finally have installed the updated Adobe Flash player with no shaking! Maybe this helps you too. JL
-
my name now appears on the upper right hand corner of my display after upgrading to mountain lion.. is there a way to get rid of that?
In System Preferences > Users & Groups > Login Options (below the list) > click the padlock and authenticate > Uncheck Show fast user switching menu as: or you can change it to icon.
-
I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?
This could be from having restrictions enabled. Icons completely disappear when "restricted"
-
Image with foreign characters in name won't display
I have an image on my drive whose name has foreign characters ("c�pia de frente.jpg"). To display the image my JSP reads the image name from the database and generates the following html:
<img src="../pictures/c�pia de frente.jpg">The page then displays a broken image icon for this image. Images in the same list which do not have foreign chars get displayed accurately. When I choose "show image.." in my browser I see that the image name has been rewritten into the following: c%C3%B3pia%20de%20frente.jpg. The rewriting that will display the image is instead c%F3pia%20de%20frente.jpg. I found the correct rewriting on another of my JSP where the image with the foreign chars actually gets displayed correctly although the code to generate the html is the same on both pages and looks something like this (simplified):
<logic:iterate id="listelement" name="list" property="rows" scope="request" type="org.apache.commons.beanutils.DynaBean">
<%
out.write("<img src=\"../pictures/"+listelement.get("name").toString()+"\">");
%> <br>
</logic:iterate> Every image that doesn't have foreign chars in its name gets displayed accurately but images with foreign chars in their names won't display. What am I doing wrong?
Thanks
NiklasThanks, but it doesn't seem necessary to replace foreign characters. It works without replacing in one place but not in another which is confusing. I think it is something with the enconding but can't see what the difference is between the working and non-working code. In both pages I have put <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">I'd greatly appreciate any more suggestions to solve this problem.
Maybe you are looking for
-
How can i install Oracle 9i Enterprise version on Linux 7.2
Hi friends, I m not able to install the oracle 9i enterprise DBA on RedHat linux 7.2. Can anybody guide me how to do it in correct way. Cuz i feel that i m not doing in right way and there is someother way of doing it ? Thanks in advance Manmeet Sidh
-
Cannot add my new Epson Artisan 725 to my printers list.
Hello, I have a problem, i just bough a new Epson Artisan 725. The wireless set up works perfectly. But when it comes to add it to my printer list. It doesn't work. A window pop up, telling me that there is a software available for this printer from
-
Where is the menu bar, how do i put sites on it?
Not computer literate here. Recently Firefox wiped out everything. I used to be able to see and go to my favorite sites (located just above the page. I would like that back, how do I do it?
-
Lower half of notification/settings dropdown screen is unresponsive
This is most noticeable on the Lollipop settings dropdown (the menu you get when you swipe down from the top of the screen twice or with two fingers) but also occurs when I have many notifications. All the icons on the lower two rows (Flashlight, Aer
-
Deploying a simple servlet with creator 2...
i need to generate a simple war file around the below servlet: import javax.servlet.*; import java.io.IOException; public class PrimitiveServlet implements Servlet { public void init(ServletConfig config) throws ServletException { System.out.println(