Changed notification sound. Still getting old sound.

A friend of mine just got a new iPhone 6 and is trying to change the Notification sound to News Flash (Classic tone). When he goes to test it, the Tri Tone sound is played. I made sure that the contact doesn't have a specific tone that would play. The phone is running the latest version of iOS.
Has anyone had anything similar happen to them on the iPhone 6 or on iOS 8. My iPhone 5S is running the latest and greatest, but I'm not having that problem. I'm running out of suggestions for him to try. Any thoughts?

Log out of the account by tapping on your id at the bottom of the Featured tab in the App Store app (or in Settings > iTunes & App Store) and then log back in with the updated version of your account.

Similar Messages

Still getting no sound

hi.
I've got a korg padkontrol and i'm using logic express 7.
When i hit the pad it registers in the transport window, and when i record it looks as though i've recorded something (the corresponding lights even flash on the controller!) when i "play" it back.
Problem is still getting no sound. I know there are loads of threads on this but I've been through them and i'm still pretty confused.
any help would be appreciated!

Does the "Padkontrol" produce sounds, or is it just a controller?
If it produces sounds, it may be that you haven't assigned the Track you're recording on to the "Padkontrol".
At any rate, you need to be sure that whatever Track you're recording to is assigned to something that will produce a sound, whether it's an external device or internal (like an Audio Instrument).
You should start be making sure everything is set up correctly in +Applications > Utilities > Audio MIDI Setup+ — you should see all your devices in there (not greyed out). If not, there's your problem…
If everything is correct in there, we'll move on to the next stage.

My mail is stuck in yesterday's mail. None of the icons are accessible. Can't open delete or change mailboxes. Still getting mail. Any suggestions?

My mail is stuck in yesterday's mail. None of the icons are accessible. Can't open delete or change mailboxes. Still getting mail. Any suggestions?

This forum is for troubleshooting Mail under Mac OS 10.4 Tiger, not Leopard. You'll probably want to post your question in the Leopard Mail discussions:
http://discussions.apple.com/forum.jspa?forumID=1223

TS1702 I cannot get Numbers to update on my iPad. Have deleted and reinstalled it and still get old information when I drag from my Excel program. Any ideas on what could be going wrong would be most welcome.

I cannot get Numbers to update on my iPad. Have deleted and reinstalled it and still get old information when I drag from my Excel program. Any ideas on what could be going wrong would be most welcome.

Bryce,
Did you try disabling ActiveX Filtering?
You have more details in the following link:
http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac tiveX_Filtering__if_you_are_using_Internet_Explorer_9__
Thanks,
Sunil

Lync User Phone Number Changed in AD - Still Showing Old (Normalized) Number Days Later in Lync Client Contact Detail

Environment: Lync 2013 backend; Lync 2010 and Lync 2013 clients. Enterprise Voice not implemented. November 2013 CU Applied on Server.
Issue: Lync user (User A) phone number changed in AD but still showing old number for others days later.
Believed Cause: User A has not logged into Lync since change to republish new phone number?
So after reading this http://masteringlync.com/ I am beginning to think that something I perceived as an issue may actually be by design?
Action:
User A work phone number changed in AD. User A has only one phone entry in AD. Normalization rule in place to basically leave number unchanged (working)
Result:
New phone number propogated fine to Exchange/Outlook fine. Old number displaying only in Lync client when viewing User A contact card detail
Lync 2010 Client displays only old number when looking at Client A contact detail (this client only presents phone numbers if they are actually normalized)
Lync 2013 Client displays two work numbers.
One that we identify as a "display number" just as entered in AD - this shows correctly as the new number. Another that we identify as the "normalized number" which is still the old
number (same as 2010 Client)
Same results whether contact is saved in Lync Client or not and is not related to Outlook contacts - in fact one test was with a Lync account that is not Mail Enabled.
I did a dbanalyze to view the SQL database detail for User A and see that Category 'userInformation' has the old phone number and the time stamp on it seems to coincide with a Lync Cllient database change (user login or refresh on that end) so this seems
to futher confirm my findings thus my reaching the point of conceding it might be out of my control.
My Question I guess is ....
Have others discovered this? Is this a bug or do normalized phone numbers actually requre a client login to accept/republish the number correctly to others even though the information is updated in AD? User detail and how it propogates seems to
be the biggest mystery and it gets harder and harder to explain to users why changes aren't displaying accuralely.

Thanks Richard... your blog definitely hit home with what I was seeing but guess I just didn't want to accept that as the end of the road on this. I'm still in a little misbelief that client interaction is necessary to update a backend change.
This process really makes phone numbers in Lync an unreliable source given a user will never know if it is it up to date. And the problem with Lync 2013 client is it shows both numbers in the client ... the address book one with the
updated AD numbers and the one the normalized AD one that the user has to login to republish. I now more fully understand the process but trying to explain that to users when they see different work numbers .. ugh.
Oh well, guess the important part is to understand the process so thanks again.

When redeploying a servlet, still get old version

Hi,
I'm new to servlets, and am having troubling redeploying it.
I'm trying to modify a servlet using Sun ONE Studio 4, update 1,
EE with Tomcat 4.0.1
I make a change to the .java file (it's in WEB-INF/classes), recompile it and then deploy again.
This causes Tomcat to stop and then start again. But in my browser
I still get the old version of the servlet. I can't figure out how to see the new, modified version of the servlet.
Please tell me what I'm doing wrong.
Thanks,
Zebulah

Before u redeploing, u need to refresh the file. It is in the toolbar`s tool. I think U can find the refresh files at there.

Called support to change Apple ID still shows old id in which I can't use and don't remember old password I can't get into games icloud I tunes

Support changed old Apple ID still shows my old Apple ID can not get into icloud App Store iTunes how to make new Apple ID be on my ipad?

Sign out of old ID and sign in with new.
Settings>iTunes and App Store>Apple ID

I have been using Firefox for over 10 years with minimal problems, but recently (within the past 2 months) something has changed and I cannot get any sound to play, even on previous web sites that did work. I'll just have to go back to IE!

Windows XP, Firefox 3.6.13 version, I am thinking it would be better to back up to a previous version of Firefox that did work! What was the latest version as of October 2010?

Thanks to some hints in several strings, I went back to the Control Panel in XP, clicked on Sounds and Devices, clicked on Audio, then changed the default device to the Realtek HD Audio output I have on my computer. Now I can hear You Tube video sound and other Internet audio fine, at least for now. I will come back if it stops again. Thanks to all who posted.

ITunes Music Folder Location changed, but iTunes still uses old location

Okay - I'm getting a bit frustrated here. Because I had no room on c:, I moved all my iTunes preferences -- applications I downloaded for the iPod Touch, file settings, and all that stuff -- to my D:\ drive. Then I went to Preferences > Advanced and changed the iTunes Music Folder location to my D: drive.
Everything SEEMED to have looked good. Or so I hoped.
The 40+ applications I bought are no longer listed on the Applications purchased list. Further, all my files are STILL saving to the c: drive.
How do I FORCE iTunes to acknowledge that the D:\ drive is storing my iTunes preferences and files?!

OK, now I get what you're trying to do. I think!
I run my ITL file off my exHD, so all my Artwork & Applications are stored there. I think if you try running your ITL file from the D: drive it will do what you want.
Try this
1) close itunes & wait for the library ITL file to save ( I assume it's still on C: hence that's why artwork/apps are DLing there)
2) copy that ITL file over to the D: drive
3) press and hold the shift key while starting itunes and choose the ITL file on D:
Now all your future artwork/apps shoudl download to D:, try it by getting a free app.

When logging in to Icloud I get the message 'Apple ID' is valid but is not an Icloud Account. I have changed passord but still get the same message.

I have just set up Icloud and backed up files to it. I have not been able to log in. I get the message 'Apple ID is valid but is not an Icloud account. I have the same User ID for Icloud and Apple but different passwords. Neither combinations work. I have reset passwords twice but get the same result.

You cannot set up an iCloud account on Windows - is that where you tried to do it? The error message you quote is what happens when, having an Apple ID, you attempt to use it on Windows to create an iCloud account. You can create an iCloud account on a Mac or an iOS device, then you can sign into it in the Windows Control Panel. None of this should have any effect in the iTunes Store (the forum for which is where you have posted).

Function Module Changed - Selection Screen still has old values

Hi All,
Our data source uses a function module while extraction. (generic)
We have changed the Text Symbols in our function module.
In the function module we fill one particular field (master data) as per the logic.
The changes done are reflected in the dataloads and data is fine in BW.
our problem is the selection screen in BW and in the reports, it shows the older values as well for that particular field.
Can anyone help us in this regard?
thanks
Sudeepti

Sudeepti,
run program
rsdds_aggregates_maintain for the relevant infoobjects and see if the change is carried over..
Also check if the text tables for the same refer to the older values...
Arun
Assign points if useful

I no longer have sound for either my audio books or my music on itunes. I've tried everything--restarting, updating, re-installing audible app, and restoring the iphone to its factory settings--nothing helps. How do I get the sound back?

How do I get the sound back on my iPhone 4? I've tried all the fixes such as restarting iPhone, reinstalling the audible app, and finally yesterday, I restored the phone to its factory settings. I still get no sound from music on iTunes or from my audible books. The phone still rings (I have sound for that) and the voice control speaks to me, and when I'm typing, the automatic text voice speaks so I can hear it but nothing else works.

Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer. As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
You can try and find 3rd party applications that might help you. I'm sure you'll pay, however.
Let this be a very important lesson learned.
Best.

What specs. do I need to look at to not get chirping sounds at the end of a sound fi

Hi all,?I am trying to run an experiment for a doctoral project and I need some help. I have a really expensi've sound card called the lynx one that I have no problems with. Recently my school purchased the soundblaster x-fi extreme audio sound card because we are testing to see if we can use a cheaper sound card and get the same results. However, at the end of certain sound files, we get a chirping sound from the soundblaster which is the end of the clip being cut off. It is like the release time of the file or something, but we can't mess with the cli
ps.
Also it doesn't do that for the lynx one so we know that some sound cards will not allow you to hear the cut off. Any advice on what specifications to look at etc to not hear the chirping sound but still getting a sound card that isn't 500 dollars? Thanks!

This one is good:
http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter

Apple tv getting the sound even when airplay mirroring is off

Hi Guys,
I am experiencing a very strange problem. I am using an Apple TV connected with a Macbook Air with Mountain Lion. The connection is done through a Time Capsule wireless network. The problem is that even after i switch off the airplay mirroring off the apple tv still gets my sound and i cannot use skype as the sound goes to my home surround system. Any ideas on this ?

I have the same problem
at first it was showing me the video on the TV, but the audio through the Mac. Then restarted Skype and it started conecting A/V properly
Now, everytime I use skype on my computer its showing regular AP on the TV
HELP

Although apple id changed to new email account iCloud still showing old one and cant access everything. How do I update it?

Changed email address. Apple id changed but iCloud still showing old one and can't find how to change it. Cant access everything or download to iCloud because of this. How do I update my info?

Welcome to the Apple community.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

Changed notification sound. Still getting old sound.

Similar Messages

Maybe you are looking for