Changed Owner on a resource, new owner gets error d124

GoupWise 7.03
An owner of a resource moved on and the resouces were changed to another user. The new owner gets error d124 if he tries to proxy. I can access the resource derectly and grant proxy access from there and the users proxy access works. The owner however can't proxy like a usual owner should.
Any Thoughts

mjdrapeau wrote:
> Ran a structural rebuild from ConsoleOne, didn't help.
Maybe a contents. After that, I'd see if reassigning the resource to another
temp owner and then back clears the security flag.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
http://www.caledonia.net/gwmove.html

Similar Messages

  • TS1717 Having problems lauching iTunes on my pc, dowloaded new version, getting error message that iTunes is not installed correctly or corrupted, reinstall. I'm afraid I will loose everything,tried to back up to earlier date,system diognosis said incompa

    Having problems launching iTunes on my pc. Had iTunes on this particular pc for over a year. Have downloaded all of the new updated versions. Now I get an error message saying "This copy of iTunes is corrupted or is not installed correctly. Please reinstall." I have backed up the pc to an earlier date when when the program was working, and also performed serveral system diagnosis all saying the program is incompatible. Searched for several compatible programs, none worked. All this happened several days after visiting iTunes.  I'm afraid that if I reinstall iTunes that I will loose everything and have to start all over. Eventhough everything is saved in an iCloud account and this particular pc. Never had a problem till now. Appreciate any help.   Thank you,   cld

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • Unable to load new filter, get error message

    Hello.  I have been using Pixel Bender for several months without a problem.  I am running CS5 64bit.  Today, I tried to add a new filter skinColorFilter and I get an error that NewFilter already exists and cannot be added.  I looked in the Pixel Bender Files folder and no such filter exists.  This is a link to the screen image of the error I am getting;  .
      I am able to continue and use all the other filters and do see a NewFilter listed but have no idea where it came from.  Any ideas what I can do to resolve this problem...........Ralph

    Hello, and thank you for responding.  The problem is that there is no NewFilter in the Pixel Bender directory and in fact there is no such file in my entire disk.  My first reaction was to delete the filter but couldn't do so as it didn't exist.  I have since downloaded other filters that work fine so have decided to give up and live without the skinColorFilter.
    Again, thank you for your suggestion.............Ralph

  • New iPhone6Plus - gets error message "Cable or Accessory not certified".  Problem is, I have nothing connected.  I have a few ipad

    I recently got a new iPhone 6 Plus to replace my 5S.  I randomly get an error, "Cable or Accessory not certified" - straight out the box.  However, nothing is plugged into the device!  I then updated the 5S to iOS 8.0.2 - it now gets the same error.  I have two iPad mini's and an iPad - all on 8.x, all use the same twelve south dock and cable to charge.  Tried hard reset/restore from backup - absolutely nothing inside the lightning connection.
    I've mentioned this to others, and all iOS 8 users I've spoken to have seen this, and they click 'dismiss', and think nothing of it.  This smells of a software problem....
    Anyone else experiencing this? Any root cause analysis done? I've tried disabling Bluetooth, but it still comes back...
    Cheers
    Iain

    Try going through this article http://support.apple.com/kb/TS2634.

  • Cant retrieve purchased itunes on new PC, get error computer not authorized.  how do I authorize new device?

    Im trying to download previously purchased itunes on a new PC, but get following error message "computer not authorized". How do I authorize new device? thanks,
    c

    Press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (81383)

  • Trying to purchase new music get error message 5002

    Tried to buy new music and received the following;
    We could not complete your iTunes Store request.
    An unknown error occurred (5002).
    There was an error in the iTunes Store. Please try again later.
    What do I do to correct this problem?

    Ronell Johnson wrote:
    Tried to buy new music...
    Apparently you did not try very hard, since you only tried one store. You can buy MP3s from any online music download store and use them in iTunes/iPod. Use this link => click here.

  • Trying to install CS5.5 Design Premium on new system - getting errors - help please.

    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 3 error(s), 4 warning(s)
    WARNING: DW031: Payload:{61A3D10A-AA4D-4E4C-B9DB-6A08D318EA41} Photoshop Camera Raw (64 bit) 6.0.0.0 has been updated and has been selected for repair. The patch {32841ECE-EC28-42CD-A4DD-6CE832A7EA8D} Photoshop Camera Raw (64 bit)_6.3_AdobeCameraRaw6.0All-x64 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
    WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
    ERROR: DW020: Found payload conflicts and errors:
    ERROR: DW020:  - Adobe InDesign CS5.5 Application Base Files depends on Adobe InDesign CS5.5 Icon Handler x64 to be installed.
    ERROR: DW020:  - Adobe Flash CS5.5 depends on Adobe Flash Player 10 Plugin to be installed.
    FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

    Check your Adobe account online... it will be the only place you might find it if you registered the software and if you did not keep a record of it yourself.

  • Installing os x to new hd gets error

    I have a 2009 Macbook pro whose HD died recently.  I purchased a 1TB Seagate SSHD SATA 64 mb cache 2.5 drive from Amazon to replace the old one.  I followed some directions online on how to format, partition, erase, etc the HD using disk utilities.  Seemed to go just as expected.  Once DU is closed, I am back to OS X utilities which gives me options like Restore from time machine and reinstall OS X etc..  I don't have an appropriate time machine backup so I need to reinstall.  When I click that option, (I am connected via wifi as indicated), it gives me a message indicating that Apple is checking my laptop to make sure it is eligible to download the copy and it appears that it passes that test.  However, when it starts to download the OS, an error pops up almost immediately, "An error occurred while installing OS X".  I've tried multiple times.  I've tried while connected via ethernet cable.  I tried to erase and re-prep the HD again.  Not sure where to go from here.  I don't have any disks.  I assume those are outdated now anyway and everything comes from the cloud anyway.  I would really appreciate any help.  Thanks!

    To use Internet Recovery Mode:
    OS X: About OS X Recovery - Apple Support
    Apple - Support - Search

  • Currency changes rates through TBEX from excel file getting erro

    Hi,
    When i am trying to upload the currency changes rates through TBEX from excel file getting error message:
    Error "The macro 'ThisWorkbook.TableBackToR3' cannot be f" occurred during macro execution
    Kindly guide what macro i need to define in excel sheet. or should i need to activate something in excel sheet relates to macros.
    Regards,
    Salil...

    When you call it the first time, it new Shell() constructs a new Display for you (the default).
    The second time, it gets the default display, but you are in a different Thread now. Since you have to create your widgets in the UI thread, it gives you that error.
    To run code in the UI thread, Display provides two methods:
    display.syncexec(..)and
    display.asyncexec(...)see
    http://help.eclipse.org/help32/index.jsp?topic=/org.eclipse.platform.doc.isv/guide/swt_threading.htm
    for more details.

  • Getting error Data record has grouping value "" in

    Trying to change Address data in HR using BAPI_ADDRESSEMPUS_CHANGE
    Getting error message : Data record has grouping value "" instead of ""
    Please advise.
    Thanks,
    Bhaskar

    Hi,
    I assume the following system situation exists:
    The new Infotypeframework NITF is inactive for PA30. Flag CCURE PC UI is activated in T77SO. You are using ESS based on Web Dynpro which uses the new Infotypeframework.
    Here we have to differentiate between infotypes which are participating in the data sharing functionality and all other infotypes. Such as:
    Infotypes without Data Sharing:
              - Infotype checks     => module pool
              - Infotype update     => SAPFP50P/SAPUP50R
    Infotypes with Data Sharing:
              - Infotype checks     => module pool
              - Infotype update     => NITF
    ATTENTION:
    BAdI HRPAD00INFTY is not processed in this case (importing parameter NEW_IMAGE is always space). Instead the BAdI HRPAD00INFTYDB of the NITF is been processed.
    The following notes (1 and 2) will solve the problem. Note 3) solves an involving problem caused during the deletion process of a personnel number.
    1) 783499 - Incorrect framework synchronization
    2) 845592 - Incorrect framework synchronization - Retroactive accounting
    3) 844998 - PU00: Termination when deleting a personnel number
    Hope this will help!
    Regards,
    Sibylle

  • Changing Owner & Business Group of ASD Custom Resource

    So this is a bit of an expansion of this discussion: https://communities.vmware.com/thread/500669?start=0&tstart=0
    You will see that pizzle85 managed to solve his challenge of BG object ownership by using an ASD Service Catalog Request located in each Business Group's Entitlements so a member of the business group can just run the Provision required to bring the BG item under management in the business group.  This is quite an effective method to solve the need.  He then has a Resource Action that allows for re-"Provision" which changes owner within the business group: a necessary task because managers tend to move around a lot so they can look busy. (just kidding, I love managers--who have a sense of humor)  So to change owner... just perform a "provision" again.
    Apparently this is one of the best kept secrets in vRA because it has been hard to figure out, and nobody is writing about it.  (I can only assume that there is some SE out there who has worked with the developers to get this capability going and it hasn't been shared widely.)
    Note: I think Business Groups as a Service is something I need to plan for (vs centrally managed Business Groups) even though their future implementation might vary, so my examples here are related to that effort because I am too lazy to demonstrate a generic example.  BUT... the idea is... ownership of ASD Inventory Objects (representing ANY Custom Resource) can be modified using this method.  Ownership includes both the owner represented by "ME" in the Items list... and the Business Group  (subtenant Reference & Label) where the item resides in inventory.
    In 6.2.x, I have not found any method in the vRO plugin for vRA to be able to change ownership and business group of an ASD Custom Resource Inventory Item, but it can be accomplished via a combination of (1) ASD Service Catalog or Resource Action "Provision" capabilities and (2) REST calls through the vRA plugin service channels.  (the latter uses the plugin service account authorizations/entitlements)
    Consider this image...
    This could represent a central management point for many business groups: where I can assign a set of resource actions allowing for automation of various business group needs, an anchor point for actions.   Those in the sktest business group Support User or Manager Role would be able to see all the business groups globally if they were all provisioned in sktest.  (a bucket to manage from)
    This also could represent a starting point where business groups are created as real objects, returned as custom resources, and "provisioned" as inventory object items.  But once there...maybe you want to move it?
    Let's say we later decided, seantesting doesn't belong in sktest because we wanted to change from the "we manage it for you" model to the "manage it yourself" model.  How do you move it?
    Like this...
    And it moves now owned by the vRA plugin service account... (which an entitled user could run Take Ownership and own it in that business group)
    The service account obviously needs to be part of the destination business group and as it ends up, has to have an entitlement to any "provision" action in the business group even though the object doesn't exist there.
    This is a tricky hack and this is how it works...
    1. vRO workflow calls the Take Ownership Action in vRA via REST (front door process).  As noted before, this has a provision attribute to the action which we know changes the owner.  So we would expect that the owner would change to the user that is making the request: which is the service account.  The service account becomes the owner, but this wouldn't change the Business Group.
    2. So we change subtentantRef and subtenantLabel in the REST call to the business group we want to target, even though the object isn't in inventory in that business group.  And Voila! The business group item representation re-provisions as a new owner in a new business group.  Effectively changing the owner and moving the object from one BG to another BG using the management-method vs the self-service-method (the latter as pizzle85 did).
    Again... maybe you care less about Business Groups.  Maybe you would prefer self-service. It is the capability of moving a custom resource inventory representation that matters.
    Here is an example of the REST call to run the "Take Ownership" action.  I have a script before this that pulls in all the variables for the "Resource" I am targeting (from the BusinessGroup object ID), the action I am running  (Take Ownership ID), the business group Ref and Label) and some of the properties I need for the Take Ownership action like bgName... but those are actually not necessary. (all of the "entries" are what is required per the Take Ownership request... if that request didn't require any inputs, there would be no entries... it is the top change of subtenant that allows for the BG move)
    System.log("resourceRef: " + resourceRef);
    System.log("resourceActionRef: " + resourceActionRef);
    System.log("targetRef: " + targetRef);
    System.log("targetLabel: " + targetLabel);
    System.log("bgName: " + bgName);
    var payload ={
    "@type":"ResourceActionRequest",
    "resourceRef":{"id":resourceRef},
    "resourceActionRef":{"id":resourceActionRef},
    "organization":{"tenantRef":"vsphere.local","tenantLabel":"vsphere.local","subtenantRef":targetRef,"subtenantLabel":targetLabel},
    "state":"SUBMITTED",
    "requestNumber":0,
    "requestData":
    {"entries":[
    {"key": "provider-rYouSure","value":{"type":"boolean","value":"true"}},
    {"key": "provider-bgName","value": {"type": "string","value":bgName}}]}
    payload = System.getModule("org.dojotoolkit.dojo.json").serialize(payload);
    System.log(payload);
    Server.log(payload);
    var catalogRest = cafeHost.createRestClient(vCACCAFEServicesEnum.CATALOG_SERVICE);
    var response = catalogRest.post("consumer/requests",payload);
    Best of luck in your Automation Efforts!
    Sean

    Turns out... it is likely not required as part of the request data.

  • HT201317 Change Owner photo stream

    Hi all,
    How do you change owners for a shared photo stream?  Can there be more than one owner for a shared photo stream?!
    Thanks,
    Ryan

    Or do I just need to delete the Photo stream and start over with a new owner?

  • Change owner

    i want to give change owner authorization to user in marketing document where is that authorization

    hI  Ajit
    it could be done through two ways however i cant give u the query for that  as i don't have but could tell u they
    one way is through SP that could Solve ur problem nd second way is through SDK but i would not recommend using the SP as sap does not support usage of it
    so u can ask other fellow  user to provide u with the query for either of the ways
    or there is a third way that is most easy out of the others thats is through creating additional authorization
    go to admin-system initialization authorization- addiction authorization creator then create a new authorization under the form id please place the "form number.item number" and save the document
    and please don't forget to click on items and under option place "Full/Read/None"
    and then go to authorization window choose the user id for which u wana place the restriction then move down to user authorization there u would find the authorization that u made in additional authorization creator and assign the authorization as per your requirement
    Hope that would help u
    Regards
    Mannish
    Edited by: manish.malik on Jul 19, 2010 5:37 PM

  • Changing owner on GPO give error

    My account is in Group Policy Creator Owners and can create GPOs fine.  I can modify permissions via the Delegation tab as well.  But when I go to try and change the owner of a policy, I get:
    Unable to set owner on <GUID>. The parameter is incorrect.
    It shows me having Modify Owner access on this policy so why would this not work for me?  Thanks.
    BTW, a Domain Admin can change this with no error.

    Hi,
    >>If you are saying to give Group Policy Creator Owners access to modify the owner of all GPOs, that is not acceptable in this environment.
    I am saying that we can just edit access control list of the GPO that we want to change its owner but not all GPOs.
    >>Seems to me if you are the owner of an object, you should be able to change this but that is not happening with GPOs in our case.
    Please follow the advice (giving the create owner
    change owner permission) I provided in the last reply to see if the issue persists.
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Best regards,
    Frank Shen

  • Change Owners and Remove Previous Owner

    We setup both a Visual Studio Online and Azure Development under my contract Developers account who is the sole owner at this time.  I would like to know if we can change owners and then remove my current developer from any administrative roles. Also,
    would all the development work and setup for VSO and Azure move without deleting work done to date? Further to this I would like to change the URL?

    Hi pphawkins,
    For Visual Studio Online account, you can ask the contract Developers to add your MS account to a team member of the Visual Studio Online account and then change the owner ship to your account. Check this
    page for more details.
    If the Visual Studio Online account is linked to an Azure subscription, you can also unlink it then relink to your own Azure subscription. If the development work is deployed to Auzre websites/cloud service, then you might continue
    to keep the linking with former Azure subscription if you don't want to make changes. Or you can deploy to your own Azure websites/cloud service if you'd like to link your Azure subscription to your Visual Studio Online account. Another
    other concerns related to Azure, you can also open a new thread in Azure forums. Thanks for your understanding.
    Best regards,  
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for