Changed Password Not working after restart[What to do]

Recently I've changed my password, but it's not working after restart.
I've noticed that, input option is not taking one of the password characters which is '!'.
I've the recovery disks, system accepts my fingerprint too.
Any help will be highly appreciated.
Thanks.

Hello,
Let me explain you what happened.
One evening I was trying to open my ThinkPad. Usually it asks for
fingerprint or password(I'm not sure which password, power-on/hard
drive). But this time I failed using my finger. and I tried with
password, but could not recall.
Then I restart and again tried with finger, this time it worked. Now
after login in Windows XP I removed all old fingerprints and create
few new. When I create new, it was asking for password, or new
password to replace. As I could not recall the pass, I've given new
password to replace.
Now to check I gave a restart. Fingerprint accepted for Power-on but
also asking for password again(Now I can see it's for Hard Drive). I
tried with new password. But it's not working. And even not taking one
character ('!') of the password.
Now can you tell me, if I did change password for Hard Drive in the
last description. Or is that possible to change it from Windows XP
environment. Else it's possible that the Hard Drive password remain as
it was which has been set from ThinkVantage before OS boot. Let me
know if you've any query which I've missed.
Thanks.

Similar Messages

Passwords not working after restart

After the server is restarted users can't login until the password is reset. I have a few generic accounts that are not affected. All passwords are Open Directory. Was going to try Crypt password to see if the issue persists. I have turned off the ability to change passwords on all accounts. The solution I had been given was to change the admin passwords. I did that. It still doesn't matter. I could change an account password. Login. Restart the server and not be able to login till the password has been reset in Workgroup manager. The server is 10.4.6 and this seems to have been happening since 10.4.2.
iMacG4 Mac OS X (10.4.5)

It is possible for the Password Server's SASL realm to change across restarts if the hostname has never been set explicitly. The default realm, if none is set, is hostname. However, depending on the order things get launched at boot, hostname may return the Bonjour name instead of the DNS name. For SASL purposes, it does not matter what the realm name is, but it must be the same all the time. It's the uncertainty that causes the problem. You can set the value for the SASL realm with the "mkpassdb -setrealm" command. After setting the realm, type, "killall PasswordService" to restart the daemon. The two SASL realm values to try are 1. whatever is returned by 'hostname' and 2. "localhost" realm.
If niether of those realms work, then:
1. set hostname correctly (mycomputer.example.com).
2. set the SASL realm to the same thing
3. restart PasswordService
4. reset the user passwords
After the realm is set, you should not have this problem again.

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

Password not working after ID name change?

Hi, I changed my Apple ID to correspond with my new email address, and when I did the password for the account stopped working on my iPhone even though I only changed the account name, not the password. So I changed the password (they made me use an uppercase letter and eight characters, whereas before it was simply six lowercase letters - what's up with that?). The new password is still not working. Can someone tell me what I'm doing wrong?

go to settings>store>sign out and then sign back in with correct info. they made you change the password for your safety, they had everyone make their passwords like this now

Macbook Pro Password not working after crash!

I have a 2012 Macbook Pro and I installed Mavericks late last year. Last night Mavericks crashed while I was working on Excel. I restarted the system but now the password would not let me log in.
After some searching on google, I tried the resetart with CMD+R and Utility option to reset the password, using Terminal for the User (only 1 user on the system), but its still not working. Then I changed the system administrator (root) password change as well, to no avail. I have reset the password 3 times and have tried blank as an attempt and as a password.
Nothing seems to be helping. Please help!!!
Ray

Resetting or changing an account password:
For Snow Leopard or ealier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022

HT4798 username/password not working after upgrade to mountain lion

hello, on my imac after upgrading to mountain lion my computer password and/or username seems not to work anymore: when i want to install an update or search for updates on the app store the combination i used so far, does not work anymore. i tried to find out how to reset the computer password but without too much success, and i'm a bit confused, what can i do? thanks a lot

You went wrong at the very beginning by not erasing the hard drive of a used computer before starting to use it yourself. I suggest you do that now.
Back up all data to at least two different storage devices.
Boot into Recovery (command-R at startup), launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume, so you had be better be sure of your backups. Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

Dll soes not work after restart teststand

Hi NI Team,
I have an issue whereby i am using a 3rd part dll to program a device. At 1st it is able to program correctly using the designated dll. But after i've restart the teststand, it still able to point to the dll, but seems like the dll is not working as it should be. In order to make it work again, I need to change the dll path to another location in order to make it work.
I've attached the following
Sequence.jpg
- Shows the module configuration
return_result.jpg
- Shows the return result of a weird return as the suppose return result suppose to be "1" or "0"
Please do advice. Thanks
Attachments:
Sequence.JPG ‏190 KB
return_result.JPG ‏21 KB

Hi There - Thanks for the reply,
The problem i am facing is the dll that i am using does not work as it should after restart teststand, unless i change the path or point the dll to another new path. The error that i am getting is, the return result shows that it can't open the file path that that has been defined in the dll call path name parameter. The weird thing is, the dll able to work (able to point to the right image again ) after i point the dll to another path, meaning if i create a new folder then dump in the same dll inside the folder and point the dll to new folder it able to work. But i will see the same problem again after i restart teststand. In terms of unloading the dll, i have tried the run options to unload module either after step end or sequence end. But the problem still exists.....

Microphone does not work after restarting computer

I just received the Creative Xmod soundcard yesterday after using an Icemat siberia usb headset sound card for a couple months. The sound is a lot better with the creative soundcard however, if I restart my computer and go back into ventrilo, my microphone does not work. It doesnt make any sound when I talk into it (almost as if it muted itself) but it hasnt. I check my sound settings and everything is the way it should be.....but the mic isnt producing any sound. It is not my headphones that is causing the problem because I have never had this problem with my old icemat soundcard. I am currently using :
Sennheiser PC350 headset
Windows XP Home Edition
The newest version of Ventrilo

http://picsend.net/images/240403ventsetup.JPG
That is how I have ventrilo setup. A friend of mine said I should Mux set to Record Control, but it only gives me the option for Wave In =/

Voicemail Trying to change password not working?

the password change feature online not working?

I do apologize that you were having problems changing your voicemail password via the My Verizon website.
It does appear the issue has been resolved. However, if you continue to have problems, please let me know.
Keep in mind, you can also change your password via the device/phone itself
To reset the Voice Mail password from the wireless handset:
Press *611 then press SEND (airtime is free).
When prompted press 2 then press 1 to reset the password.
Enter the requested information for security verification.
Press 2 to reset the password.
OR
Call (800) 922-0204 (toll free) from any phone to reach the easy-to-use automated customer service menu.
When prompted press 2 then press 1 to reset the password.
Enter the requested information for security verification.
Press 2 to reset the password.

Printer does not working after restart

I have installed HP LaserJet m1120 using hplip and hplip-plugin from AUR.
Everything was fine (printer worked) but after rebooting, printer doesn't working at all - cups doesn't "see" it and hp-testpage shows this:
# hp-testpage -i
warning: hp-testpage should not be run as root/superuser.
HP Linux Imaging and Printing System (ver. 3.12.10a)
Testpage Print Utility ver. 6.0
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
| SELECT PRINTER |
Num CUPS Printer
0 HP_LaserJet_M1120_MFP
1 PhotoPrint
Enter number 0...1 for printer (q=quit) ?0
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_M1120_MFP?serial=MF12D9K
error: Unable to print to printer. Please check device and try again.
note: If an error occured, or the test page failed to print, refer to the HPLIP website
note: at: http://hplip.sourceforge.net for troubleshooting and support.
PhotoPrint is my second printer and it works fine.
What should i do? I have been trying to configure it for long time...
Last edited by Extravert (2012-11-17 14:46:06)

Maybe, I haven't understood something but it still does not working.
I found that journalctl outputs some errors
Nov 17 22:57:06 trash-serv hp[405]: io/hpmud/pp.c 627: unable to read device-id ret=-1
Nov 17 22:57:06 trash-serv python2[406]: io/hpmud/pp.c 627: unable to read device-id ret=-1
And lsusb does not shows this printer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Last edited by Extravert (2012-11-17 15:17:13)

HT4889 Password not working after migration

I migrated files from my iMac to my MacBook Air. However, once completed, my login passwords would not work on teh MacBook Air. I know I am using the right password. How do I fix this?

In the meantime I was able to solve the problem.
The problem arises when the operating system on the target computer is an older version than on the source computer. I had OS X 10.8.2 Mountain Lion on my old MacBook Air (Source) and OS X 10.7.x Lion on the new MacBook Air (Target).
After installing OS X 10.8 from an USB Stick the problem was solved and I was able to log in. The transfer of user accounts and programs was done.

Keybord not working after restart/shut down

Most of the time, when I shut down or restart my iMac, my keyboard stops working. The computer doesn't see a keyboard at all. I have to restart a number of times and suddenly the keybord's working again.
What can cause this?

Which keyboard? Details, please.

IMac password not working after time machine recovery

Just got a new hard drive - used Time Machine to reinstall the files - now my password does not work - suggestions?
Running latest iOS
Thanks...

Try this:
http://support.apple.com/kb/PH11390?viewlocale=en_US

New Mac user, black screen on start up! Password not working after SW reinstall

Re doing this again.......
I got blk screen, reinstalled Mac os x ( had the lastest software up to 2 days ago) and now my password does not work?
I did get a prompt 2 days ago to update but didn't get a chance to. Also had my iTunes acct hacked into. Can someone help?

Foxfire, welcome to Apple Discussions.
A failed internal memory battery can cause the no video. Check this site for battery part numbers and sources. Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
Cheers, Tom

Firefox is not working after restart. Need to reinstall every time I am starting PC.

Hello everyone,
I was happily using Firefox untill few days ago. Since then Firefox takes about five minutes to start (you cant see in taskbar or Application in task manager, just in Processes in task manager). When it finaly opens the first window it is not responding and there just blank window). It does the same in safe mode.
I tried to reinstall it several time, with deleting every Firefox related files on computer (following every relevant instruction from Support). I tried to backup my profile and start with new one after reinstall. Every time with same result: Firefox works perfectly after reinstall (even when I transfer files from old profile, every bookmark is right), but when I restart computer the problem is back.
I checked PC for malware and viruses by Avast, there should be now collision with other software since I did not install anything recently. I have cleaned registres, cache and cookies with CCleaner.
I am running 64-bit Windows 7 Lenovo E430, everything worked perfectly for half a year. Only problem I can relate to is a warning message about low free space on system drive, which occured at the same time problems with Firefox started (but it is now even true, I have 5 GB of free space on system drive).
I found other unresolved topics, one of them with same system configuration as mine.
https://support.mozilla.org/en-US/questions/956861?esab=a&as=aaq
https://support.mozilla.org/cs/questions/958824
Any suggestions before I desperately change to Firefox Portable?

Why not install and try Firefox portable, it may well be a good troubleshooting step. Try running it from an external memory stick.
The threads you referred to
* [/questions/956861] was closed but never solved
*[/questions/958824] similar
Some system information would help
*How much RAM is installed ?
*What is the total size of the Hard Disk Drive ?
*What is the current amount of free-space in GB ? and as a percentage ?
I try not to use Windows but certainly at one stage a rule of thumb was 20-25% free space should be available. Under about 12% defragging of a disk would likely fail. A page file would need to be larger than the amount of RAM maybe 1.5X , and a hibernate file would be the size of the RAM.
* Do not Hibernate if you are low on HDD space.
I suggest you proceed as follows
#Answer the above questions. I worry you have a lack of diskspace.
#Do a full scan with multiple and up-to-date anti-malware tools. Do not rely on Avast alone. No tool picks up everything. Report back what you scanned with and what was found.
#Backup and keep whatever profiles may be good or may contain recent information such as passwords and bookmarks, but do not use them yet.
#Download a new installer then Do a clean reinstall of Firefox, ensuring that the program folders are deleted before you re-install.
#Now restart, you expect the first restart to work. Close down and try again does it now work OK ?
The detailed instructions in the thread you read [/questions/958824#answer-436552] should help you.
If you have continuing problems is this after a restart of Firefox, or a restart of the Windows Operating System ?

Changed Password Not working after restart[What to do]

Similar Messages

Maybe you are looking for