Changed password when first signing up to iPhoto now I can't send pictures

I didn't realize you could not change password in iphoto share. First time user . . .changed password when prompted to enter a password during first log-in to share. Now, every time I want to share a photos, I get an error message that iphoto doesn't recognize email with password and therefore cannot share. New to MAC and frustrated.

Have you gone to the iPhoto accounts preference and set the correct password?
or set Apple mail as your e-mial client in the iPhoto preferences
LN

Similar Messages

I changed my password on my mail acct on ipad2, now i can't send email

I changed my password on my email account on my ipad2, now it won't send email.

Remove the account from your iPad and re-add it. Should clear it up...
Just so you know you can't change your email account password on the iPad for the account(using settings). For example if its a yahoo account, you need to login to yahoo on a browser to change the password. You can't go into settings and simply just change the password on the iPad itself. Then it will be a "wrong" password and block incoming and outgoing emails.

I had the "WhatsApp" hack on my email, changed all my passwords (gmail, apple ID, etc.) but now I can't send messages through my mail app on my laptop even though it's signed in to my gmail account and is receiving messages.. How do I send msgs again

I was hacked by the "whats app" email and had changed all my passwords (gmail, apple ID, etc), my mail app on my laptop is signed in to my gmail as per usual and is receiving mail but not sending mail. How do I get it to send mail again? Also is it ok to have the same gmail account used (as my mail and applied ID) after the hack or should I completely reset everything? Ie. get a new email address…So frustrated and confused, please help!!

It's normal for your phone number to be grayed out in Settings>Messages>Send & Receive under "You can be reached by iMessage at" on your phone because it can't be changed. If you phone number is listed there it should also be listed further down under "Start new conversations from". If you tap your number there to select it, your messages will be identified to others as coming from your phone number, not your email address.
Is you phone number listed there on your phone?

I have change e-mail address after first registration and when I logged in it send new password to my old e-mail address. now I can't use my old profile

I have change e-mail address after first registration and when I logged in it send new password to my old e-mail address. now I can't use my old profile.
and I can't install my old adobe X anymore
what to do?
Mika

Change Account https://forums.adobe.com/thread/1465499 may help
-wrong email https://forums.adobe.com/thread/1446019

Unable to change password while first logon on windows server 2008 R2 SP1 system

Hi Team,
Ad team has created new account for me with change password on first logon setting
When I logged in on Windows Server 2008 r2 SP1 system with my new credentials I get a error message stating that
"You must change your password before logging on the first time. For assistance, conatct your system administrator or technical support"
Concern:
I do not get password change screen on first logon on the server. How should I change my password on first logon?

Hi,
I got resolution for above issue
Run ==> type "tsconfig.msc" ==> double click "RDP-TCP" ==> change security layer to
RDP Security layer ==> Apply ==> OK

Change Password on first use does not work properly.

I have created apex application user in Oracle Apex 3.2 as follows
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99');
END;
As in the documentation
p_change_password_on_first_use IN VARCHAR2 DEFAULT 'Y',
User should be prompted to change password at first use. But it does not work properly. There is no such message. Still accepts user to log in with old passord that was first given to the user. I have tried explicitly to ensure change password at first log in. by
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99',
p_change_password_on_first_use =>'Y');
END;
Still does not work. How can I ensure user to change password on first login.
Hasan Al Mamun
Programmer
Bangladesh Bank
Dhaka, Bangladesh

Might be a long way around the problem but I would utilize a boolean flag in a column (FIRST_LOGIN) your custom auth table set to 'Y' when you create their account. Then on the login page have a page process something like:
** NOT TESTED **
declare
v_first VARCHAR2(10;
v_session NUMBER;
begin
v_session := APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID;
select FIRST_LOGIN into v_first from AUTH_TABLE where user_name = :P101_USERNAME and :P101_PASSWORD;
if v_first = 'Y' then
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':2' *** THIS IS YOUR PAGE TO HAVE THEM RESET THEIR PASSWORD ***
else
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':1' *** MAIN LOGIN PAGE *****
EXCEPTION WHEN OTHERS THEN
*** handled **
end;
The page 2 in this example would have an few items for them to enter their new password twice, a page process to update their password in the auth table and then redirect them to the intended first page.
Not sure if it meets your setup.
Ricker

Wwv_flow_fnd_user_api.edit_fnd_user to set change password on first use

Hi,
Oracle Database 11g Release 11.2.0.1.0 on Windows 2008 R2 x64
Application Express 4.1.0.00.32
I am importing a workspace from our dev system to 100 databases and I want to make sure the developers are not forced to change password on first loging otherwise this is going to waste a lot of time
I am running
alter session set current_schema = APEX_040100;
begin
     wwv_flow_security.g_security_group_id := 10;
     wwv_flow_security.g_user := 'ADMIN';
     wwv_flow_security.g_import_in_progress := true;
     for r in (select *
               from apex_040100.wwv_flow_fnd_user
          where security_group_id <> 10) loop
          wwv_flow_fnd_user_api.edit_fnd_user(p_user_id => r.user_id,
                                        p_user_name => r.user_name,
                                        p_change_password_on_first_use => 'N',
                                        p_first_password_use_occurred => 'Y');
     end loop;
     commit;
     wwv_flow_security.g_import_in_progress := false;
end;
However, this doesn't seem to do anything and doesn't return an error either. When I query the apex_040100.wwv_flow_fnd_user table nothing has changed
I've searched the APEX documentation (http://docs.oracle.com/cd/E23903_01/welcome.html) for wwv_flow_fnd_user_api and there is only one match that just lists the package name, not even the spec
thanks in advance
Robert

Ok now I had a bit more time to look at your code.
I would do it like this:
declare
t_secgrp_id     apex_040100.apex_applications.workspace_id%type;
t_existing_appl apex_040100.apex_applications.application_id%type := <YOUR APP number HERE>;
begin
select workspace_id
into   t_secgrp_id
from   apex_applications
where application_id = t_existing_app;
wwv_flow_security.g_security_group_id := t_secgrp_id;
wwv_flow_security.g_user := 'ADMIN';
wwv_flow_security.g_import_in_progress := true;
for r in (select *
            from apex_040100.wwv_flow_fnd_user
            where security_group_id t_secgrp_id)
loop
    wwv_flow_fnd_user_api.edit_fnd_user(p_user_id                      => r.user_id,
                                        p_user_name                    => r.user_name,
                                        p_change_password_on_first_use => 'N',
                                        p_first_password_use_occurred => 'Y');
end loop;
commit;
wwv_flow_security.g_import_in_progress := false;
end;especially finding out the secgrp..
Regards,
Richard
blog: http://blog.warp11.nl
twitter: @rhjmartens
If this question is answered, please mark the thread as closed and assign points where earned..

Password policy "change password at first login" errors!

Complete panic!
I've updated to OS X Server 4.1 and all my users appear to be ok. All green lights within the server app. Computers are NOT giving the red light 'network accounts unavailable'. However, no one can login. Every user, new and old, are being prompted at login to create a new password (say: Password 1). They type in a new password (say: Password2), the box shakes like it didn't accept it. However, if they try to login again, it won't accept Password1. If they type Password2, they again get prompted to change the password.
So it looks like it's accepting the password, but stuck in this reset password loop.
I've checked in the server app and workgroup manager. Neither have 'reset password at first login' selected.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname. If the server and clients are all running OS X 10.10 or later, directories should be shared with SMB rather than AFP.
5. Follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. Reset the password policy database:
sudo pwpolicy -clearaccountpolicies
14. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

TMG 2010 publishing Exchange 2010 OWA cannot change password if user must change password at first logon is set

Hi,
I have an odd issue whereby if I set "user must change password" on an AD account, the end user cannot logon, they're simply taken back to the OWA login page as if their password is incorrect.
My setup is as follows:
outer TMG -- uses a listener for email.contoso.com and is configured for no authentication.This uses a publishing rule to publish the inner TMG server. This server is not a domain member.
inner TMG - uses a listener for email.contoso.com and is configured for NLTM\kerberos negotiation with forms authentication (Windows Active Directory). This server is a domain member and use a publishing rule to publish the internal CAS. Allow users to change
password is selected in the publishing rules.
Exchange 2010 SP1 - uses integrated windows and basic authentication. Has the appropriate registry key configured to allow users to change their AD password on first logon.
I've registered an snp for "http/email.contoso.com mailserver-dc1", all SSL certificates being used are valid and my configuration used to allow users to login and change their password with "user must change password on first login"
set in AD.
If I launch a web browser on an internal server and point it to email.contoso.com I'm immediately presented with a generic Windows authentication request (similar to what's seen in ADFS) rather than the standard OWA page. No matter what I do, I cannot login
and change my password using the correct URL. However if I point my browser at
http://192.168.4.10/owa I'm prompted to login and I can change my password using the sam credentials.
The only recent changes made are:
- Disabling SSL 3.0 and enabling TLS (http://www.isaserver.org/articles-tutorials/configuration-security/improving-ssl-security-forefront-threat-management-gateway-tmg-2010-published-web-sites.html)
- Replacing the TMG listener certificates so that they now use SHA2 rather than SHA2 (certificates are trusted on each TMG server)
Looking on the outer TMG and the DC logs I can see schannel errors which I believe are related to the problem. TMG monitoring also shows "Failed connection attempt: 1907 The user'spassword must be changed before logging on for the first time"
I've checked that my inner TMG and DC are using the same certificate for server authentication and gone through this guide:
http://blogs.technet.com/b/keithab/archive/2012/02/29/setting-up-and-troubleshooting-ldaps-authentication-in-forefront-tmg-2010.aspx
If I try to use ldp.exe on the inner TMG, I get the error in the pic below
Thanks
IT Support/Everything

Hi,
You could try to analyze the TMG tracing and try the troubleshoot steps in the blog below.
TMG 2010 – FBA, troubleshooting the change password feature
http://blogs.technet.com/b/isablog/archive/2012/05/07/tmg-2010-fba-troubleshooting-the-change-password-feature.aspx
Best Regards,
Joyce

User change password after first logging in Oracle 11g

Hi
Can you help someone in connection with this problem:
user can not change password after first logging in Oracle 11g
All the best
Ragip Avdijaj

Sounds like they are not getting logged in at all, so they are never getting to the point where they can change the password, but we need to see more detail to give a better answer (an example or copy-paste of a sqlplus session might help)

I changed my AOL password! Now I can't send photos on iPhoto. It says can't recognize username and pass word. Any advice?

I changed my AOL Password. Now I can't send photos on iPhoto It can't recognize the username and password. Any advice?

What version of iPhoto and of the OS?
For iphoto '11
in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

Restrict users from changing password on first login?

Hi,
I am doing mass user upload into UME using script import. How should I use the below functionality to restrict the users from changing password on first login?
IUserAccount uacc =UMFactory.getUserAccountFactory().newUserAccount(uid,newUser.getUniqueID());
uacc.setPassword("saras");
uacc.setPasswordChangeRequired(false);
How to implement above functionality with mass upload from script import?
Thanks
Srinivas
Edited by: srinivas M on Jan 20, 2009 9:05 PM

hi srinivas,
try this api
http://help.sap.com/javadocs/NW04S/current/se/com/sap/security/api/IUserAccount.html#isPasswordChangeRequired()
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d562b7-1405-2a10-dfa3-b03148a9bd19
this document able to retrive the password.. same positon u can disable the field
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10649c90-24af-2b10-1086-ea0667ec3655
thanks

HT204053 I have one Apple ID and password, when I sign in iCloud enter Apple ID and password but can not Sign up " This Apple ID is valid but is not an icloud account." Why?

I have one Apple ID and password, when I sign in iCloud enter Apple ID and password but can not Sign up " This Apple ID is valid but is not an icloud account." Why?

You can not create an iCloud account using a PC, set the account up on a Mac or an iPhone/iPad, then you will be able to sign into it on your PC.

HT204409 How do I change or reset my password for my wifi? I have forgotten my initial password when I setup the wifi and now cant use it with my iPod but it still works with my iPad as the password option doesn't come up like the iPod.

How do I change or reset my password for my wifi? I have forgotten my initial password when I setup the wifi and now cant use it with my iPod but it still works with my iPad as the password option doesn't come up like the iPod.

If you are saying that the iPod asks for the password for the network and you do not know it, what may work is to turn on iCloud keychain for the iPod and iPad., Thet may sync the password from the iPad to the iPod
http://9to5mac.com/2013/10/26/how-to-setup-and-use-icloud-keychain-for-mavericks -and-ios-7/
Otherwise you will have to go into the router settings and reset the wifi password in the router

My Apple ID is verified, when I sign into iCloud on iPad it can not verify?

My Apple ID shows "verified" on the manage my ID page on Apples website, when I sign into iCloud on iPad it can not verify?

Try going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Changed password when first signing up to iPhoto now I can't send pictures

Similar Messages

Maybe you are looking for