Changed PO Indicator
Hi,
Is there such an indicator (not the Report) available to distinguish changed PO from New PO?
Can you provide Table/field details if so?
I tried through Table CDPOS with TabName EKPO and "ME21>Header>Statistics-->Changes" as well, but its not found any Indicator that distinguishes New PO from Changed PO.
Thanks in Advance
Hi
We have to make a customized report taking data from structure, if you go to PO in display / change mode : ME23N/ME22N click on environment on menubar you will find Header Changes & Item changes by taking this data we need to customize report.
sory i don't know the table name, may be some other expert may ad to this.
Regards
Similar Messages
-
Public Change Management indicator and mid-year reassignment in new GL
Dear experts,
I have two questions on documentation at help.sap.com
here http://help.sap.com/saphelp_erp60_sp/helpdata/en/b3/fa3a95ecd9465c82957992e30e1ff2/frameset.htm
it is said that:
1. "You can use the SAP document change interface to reassign original documents by setting the Public Change Management indicator when converting the worklist."
I run FMCT transaction and can not find this "Public Change Management" indicator. Where should I look for it?
2. "When you update in new General Ledger Accounting an FM account assignment that is to be reassigned, a mid-year reassignment is not possible"
Does this mean that I can not do a mid-year reassignment, if I use the new General Ledger Accounting?
Thank you in advance!
IrinaHi Irina, as I know this applies if the FM account assignment element is an split charateristic in the New GL, for example the Fund, if the fund accounting scenario is active.
best regards
César -
Transaction code to change group indicator & group number of a routine
Transaction code to change group indicator & group number of a routine
Post Author: paul.carpenter
CA Forum: Formula
Sorry for the ignorance. I did a little more playing, created a group summary count, then checked it against my record count per group.
All set now! -
Document Number series doesn't allow to change period indicator
Dear Experts,
We are facing a problem while going to change period indicator of any document numbering series from previous year to current financial year.
There is no problem creating new numbering series for new financial year. But while trying to change previous year period indicator series with current year It shows a error "Series in use" 3535-9.
We are running SAP B1 Verison 9.02.002 PL 10 Hotfix1
Any help please suggest.
SK
Note: Last Financial Year while we didn't face this problem in SAP 8.82.070.07.I have the same problem. You could solve it?
-
Changing Period Indicator not allowed in numbering series setup
Hi to all dear experts... and happy new yaer!!!
I need a little help to solve thi s issue.
Today i create a new posting period for year 2015 (sub peridos => months)
After that, i try to change the period indicator in ADMINISTRATION => SYSTEM INIZIALIZATION => NUMBERING SERIES, but at the update, i receive an error message like:
SERIES ALREADY IN USE -Name of the series- [Message 3535-9]
Before update to 9.0, every year i was able tio change the period indicator in Numbering series setup.
Have some advice??
Thank's in advanceHi.
Attached you can find a screenshoot with error message.
For the highlighted row n. 8, i try to change the period indicator from 2014 to 2015.
Updating, i receive the error "NUMBERING SERIES ALREADY IN USE [Message 3535-9]"
I'm sure this operation was possible until the 8.82.
P.S. The language system is in italian.. sorry... -
BDC to change MRP indicator in MMSC transaction
Dear all,
I want to set the MRP indicator '1' to exclude storage location stock during MRP run in 'MMSC' transaction .
I want to do this for materials having no MRP indicator in MMSC for particular storage location.
How to do this in BDC ?Thanks.
But position of storage location varies in MMSC for different materials. I want to make changes as per the material list in txt.
Some materials have no MRP indication in MMSC. Some may have . I want to match the material & do the changes where required.
How to give these conditions of matching/not matching (storage location or MRP indicator in BDC ? -
How do i change an indicator's background color
Hi,
I want to change the background color of an indicator. (Yellow in attached image). I would like to know, which property node controls this value so that I can wire a color box to it.
thanks,
jason
Solved!
Go to Solution.Oops, here is the VI!
Kudos are (always) welcome for the good post. :-)
Attachments:
BGcolor.vi 9 KB -
CRM Service : Changing accounting indicator during service confirmation
We are running on CRM 5.0. We have implemented CRM service. We have a need to influence accounting indicator (which is in turn sent to R3) when service confirmation is completed. We have tried different BADI's but nothing is worked so far.
Anybody has any clue regarding this?
Appreciate your help.
-NitinI want to change the accounting indicator field when we complete the confirmation.
I tried adding the logic in ORDER_SAVE BADI (method PREPARE). But since confirmation is already complete the logic won't change the accounting indicator at line item level.
With this BADI logic if user saves the confirmation first and then completes the confirmation then accounting indicator is changed.
But this is not acceptable for our users as they want to complete the confirmation and then save.
Second approach we tried was implementing BADI CRM_UPLOAD_CO ( Method CHARACTERISTICS_SERVICE_FILL) . We enhanced the CO Interface structure to add Z field for Accounting Indicator and transferring that Z Field into COAS-BEMOT field in R3 using R3 User exit "IAOM0001".
All the values are passing correct upto COAS-BEMOT. Still that is not reflected in Internal Order lines when we check the accounting indicator using KOB1.
Thanks
Nitin -
PS Experts,
Please guide me on the following case,
I have a customer project started 5 months ago with
RA Type (e) Revenue-Based Results Analysis
Profit Indicator (M) With Profit Realization
Actual cost incurred , No billing to customer
During the periods end closing through tcodes KKA2 & CJ88 the system performs WIP and posted in FI
This month my customer asks to change the Profit Indicator to be (Q) Percentage-of-Completion
I tried to do these changes and i made change in CJ20N in RA KEY and run KKA2 & CJ88 the result is that the system performs Sales in Excess but it keeps the old WIP and didn't delete them
My questions are
Is that right to change the valuation method in one project during its life
How does the system perform Sales in Excess/Bill in Excess while WIP( Work in progress) already performed and didn't automatically delete the WIP
Does it mean that a manual entry is needed to delete the WIP
Thanksit is not a good practive to change RA method in the life cycle of its project
having said that if the change is relatively imple like changing Cost based POC to REv based POC then there would be no prblems as all the accruals and deferrals would readjust based on the new method
even with Q I would have assumed that this would be no issue - have you maintained the POC using statistical key figures??
if you need to do this with effect from previous month then you have to undo settlement and then recalculate RA and the settle again as explained by Paul -
Change string indicator background color
I am trying to make a string indicator with a black background or make it to where the string indicator is transparent
thank you
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Solved!
Go to Solution.You can change the colour of a string control background using the paint tool. Choose View > Tools Palette.
Select the lower-most icon of a paint brush.
Right click on the background area of your string control.
A colour mixer will appear - select either a block colour or the T in the upper right corner for transparent.
Thoric (CLA, CLED, CTD and LabVIEW Champion) -
I am writing a script (in VB) to fill out a catalogue page (or several pages). The page is filled with blank catalogue entries, each of which is a group of text frames and image frames. One field is manually typed in and the rest is autofilled form an XML file. After the data is filled in, the groups need shuffling down to fit on the page and where there is no space, they get moved to the next page. I rely on the user ordering the groups such that when the code iterates throguh the groups by index, the groups are worked through from the top of the page to the bottom. This works fine until I move a group to the next page. Moving a group means it gets added to the end of the list of groups. My question: is there a way to change the order of the groups (as they appear in the layers panel)?
This problem would also arise if the user wanted to insert a new item into a already populated indesign file.
Thanks
SteveHi Steve,
Arranging Page Items
Page items in an InDesign layout can be arranged in front of or behind each other by adjusting their stacking order within a layer, or can be placed on different layers. The following script fragment shows how to bring objects to the front or back of their layer, and how to control the stacking order of objects relative to each other.
//Given a rectangle "myRectangle" and an oval "myOval",
//where "myOval" is in front of "myRectangle", bring
//the rectangle to the front...
myRectangle.bringToFront();
When you create a page item, you can specify its layer, but you can also move a page item from one layer
to another. The item layeritemLayerItemLayer property of the page item is the key to doing this, as shown
in the following script fragment (for the complete script, refer to ItemLayer).
//Given a rectangle "myRectangle" and a layer "myLayer",
//send the rectangle to the layer...
myRectangle.itemLayer = app.Documents.item(0).layers.item("myLayer");
The stacking order of layers in a document can also be changed using the move move method of the layer
itself, as shown in the following script fragment (for the complete script, refer to MoveLayer).
//Given a layer "myLayer", move the layer behind
//the default layer (the lowest layer in the document
//is layers.item(-1).
myLayer.move(LocationOptionsafter, app.documents.item(0).layers.item(-1));
Thanks
-Anshul -
I notice an issue that predominantly happens when I use my thumbs to tap but does happen with fingers from time to time.
When I select an icon (say, for instance the lower-right corner icon to jump into camera settings), the icon changes color slightly when my thumb touches the glass, and then when I remove my thumb, nothing happens.
Sometimes this happens more than 5 times in a row. It's one thing if the screen never recognized my finger/thumb in the first place. It is a bit more madening when I KNOW that there was recognition (icon changing color) and yet nothing happens..
Anyone else having this problem? Is there some way to recalibrate the screen?
Right after I posted this message I tried that camera setting button - 7 tries before anything happened with my right thumb, one try with right index finger, then again it took 5 tries with index finger. The frustrating thing is that the icon to load the camera in the first place (lower right corner)... that one almost always works with the first tap...Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
After updating the iphone 5 to IOS 6.1.3 battery drains fast. Also it takes more time to change battery status from Red to Green. Any solution?
Anyone?
Thinking I'm S.O.L at this point. -
Program for setting changed output indicator for deliveries
Hi All,
Is there a standard program and Form routine to send changed Delivery data as EDI output ?
We have a scenario in which if a delivery that has already been sent out is changed, we want to trigger a changed output. We are using output type SEDI in application V7.
If i click on my SEDI output type, I see an option to input Program name and FORM routine name for change output under the tab General Data, but i dont know what values to put here . Any and all help will be greatly appreciated .
Thanks,
AmitHi Amit,
There is an SAP Note 395569 (CHECKLISTSD: Change outputs) which should help you achieve what you want.
Best Regards
Nikhilesh -
Change boolean indicator type across entire VI
I have a VI with hundreds of round boolean indicators. I would like to change them to rectangular. The only way I know to do this right now is to right click, then choose Replace and navigate to the rectangular type. If I select several indicators at a time, this right-click context menu is no longer avaialble.
Is there a way to do this across the entire VI, either by editing a params file somewhere or by being able to select many at the same time/bmishoe wrote:
thank you, I'll see what I can do...
Here's a Quick Drop plugin that'll do what you describe. Change the style constant in the For loop to change what it replaces the selected objects with.
This VI is in LabVIEW 2012 and was not made pretty.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
Attachments:
QD_ReplaceIndicator.vi 34 KB
Maybe you are looking for
-
Import Previews Low Resolution?
As an Event Photographer I need to be able to quickly preview images from my Cards, Import only the "GOOD" images and transmit these for immediate distribution. Problem is the PREVIEW of the images PRIOR to import are very low resolution and don't al
-
Initiating variables with private constructor fails
Goodday all, At the moment I'm working on a little class that reads the input from the console screen. The class looks like this (I omitted a few unrelevant methods): public class SomeClass { private static BufferedReader bin = null; // private c
-
I NEED HELP!!!!!! i changed my apple id and my password (for the apple id), but on my ipod and mac book pro my old apple id keeps showing up for icloud, and i cant put either password!!! Trust me i tried.. What should i do???? So please help!!!!!!
-
My iMac (21.5-inch, Mid 2010) has rebooted twice now for no apparent reason, since the successful install of Yosemite.
-
I am receiving the following error message when attempting to text to a valid Mobile/Cell number in Peru...Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. I am able to receive texts from the number in qu