Changed router box - and can't re-connect time capsule ?

I have upgraded my wlan router box - and therefore changed my network name - and i can't reconnect my time capsule. In airport utility it doesn't pick it up. Please help ?

Your Time Capsule was programmed to remember the settings to "join" your "old" wireless network. It is still looking for that network to connect, but cannot because the network is no longer there.
You will need perform a Factory Default Reset on the Time Capsule and reconfigure it again with the correct settings for your new wireless network.
I am sure that you know the name of the network, but you may not know the exact type of wireless security that  your new wireless router is using.
Check your documentation to find out about this, as you will need to provide the Time Capsule with the correct information to join the new network.
If the Time Capsule does not receive the right settings, it will not be able to join the network and you will see a blinking amber light instead of green on the Time Capsule after you save the configuration settings by clicking Update.
The Factory Default Reset is a bit tricky....you almost need 3 hands.
Pull the power cord from the back of the Time Capsule
Wait 4-5 minutes
Hold in the reset button and keep holding it in for another 8-10 seconds while you simultaneously plug the power back in to the Time Capsule
Release the reset button after the hold period and allow approximately 30 seconds for the Time Capsule to restart to a slow, blinking amber light
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue to follow the guided setup to configure the Time Capsule to "join" your wireless network
A green light about 25-30 seconds after you click Update will signal a successful setup. If you only get the blinking amber light...you will need start all over with the Factory Default Reset and try again.
The reset will not affect the existing backups on your Time Capsule, but you will need to reset Time Machine again to get backups going. Post back if you need info on this.

Similar Messages

  • Just moved and have new internet WiFi provider and can't get my time capsule set up.

    Just moved and have new wifi provider and can't get my time capsule to work with it.

    The TC is designed for ethernet WAN connection .. it will not work with wifi provider.

  • Help! Firewall setting changed to default and can no longer connect

    So I was attempting to open up port 8080 outbound and made a number of changes. The issue was still present so I clicked the reset to default for the firewall settings and am now stuck with a box I cannot connect to (Windows Server 2012).
    Please can someone shed some light on a solution for me as I don't want to go through the pain of reinstalling everything again.
    Thanks
    Phil

    Hi,
    Are you not able to connect to Windows server 2012 R2 Datacenter (VM)   ? If yes, I will move the forum thread to Virtual Machines queue for a broader support.
    Could you share the Exact error message you get while trying to connect to VM ?
    See How to
    Set Up Endpoints to a Virtual Machine that might be helpful.
    Regards,
    Shirisha Paderu

  • Change of ISP and can no longer connect with AE

    Well, I figured this would happen - I switched from AT&T DSL to Charter High-Speed Internet, and the darn cable modem is making my life difficult. When I plug in with an Ethernet cable to my laptop, no problems. But that's no fun.
    When I connect my AE, it's a different story. Connection bars are great (I'm less than five feet away from it now, but posting this using my neighbor's wireless), and the configuration looks just fine in the AirPort Setup Utility. The problem is that I simply can't get anywhere - it won't actually connect to a page. When I use the Apple DNS "test", it recognizes it as an apple.com website and inserts the proper "name", but the computer never gets there.
    What am I missing? Everything does look right on the AE configuration and my computer's wireless settings; I'm just not sure what's going on! Thanks!
    12" PowerBook G4   Mac OS X (10.4.5)   AirPort Extreme

    Already noted two things that I forgot - this is with Charter. I checked old posts on the topic, and some have noted a similar problem. This seems to have been resolved with the old 'unplug in random combinations' trick, but that hasn't worked for me yet. I've tried doing my computer, my modem, and my AE in all six permutations of order.
    I'm stuck. Thanks.

  • New internet provider (moved from Comcast to Uverse) and I can't get my new network to stay put, and I can't get my Time Capsule to stop blinking yellow

    I have moved from Comcast to Uverse, and can't get my TIme Capsule to stop blinking yellow.  I know it isn't updating.  Additionally, I can't get my computer to recognize the 'new' wireless network.  It keeps changing back to the 'old' network.

    You have two separate issues here. although both were created with the recent changes on your network.
    Find out why the Time Capsule is blinking amber as follows:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click directly on the the Time Capsule icon
    Click directly on the amber dot....and another window will open to explain more about the issue...along with suggested actions that you can take to remedy the issue.
    If you want your Mac to connect first to the "new" network....
    Open System Preferences (gear icon) on the dock
    Open Network
    Click on WiFi on the left
    Click Advanced at the lower right
    Make sure that the name of the network that you want the Mac to connect to first appears at the top of the connection order list. Drag the name to the top if it is not there now.
    Click OK
    Click Apply
    Now your Mac will attemp to connect first to the network that you positioned at the top of the connection order list.

  • TS1398 I can't find my wifi name or signal or any other wifi spots and I'm right next to my wifi router box and my iPod isn't detecting my wifi router box I'm my house

    I can't find my wifi name or signal or any other wifi spots and I'm right nepxt to my wifi router box and my iPod isn't detecting my wifi router box I'm my house

    If not:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then
    Does the iPod connect to/see other networks? (you were not clear)
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Can I use the Time Capsule as a backup drive and wired network switch? I do not want to use the wireless part as I already have an ADSL 2  Wireless Router for that. Thanks.

    Hi
    I just went from PC to MAC. Have a MAC Mini and wanted to get a time capsule for backups. I would like to use it as a wired device instead of wireless. Would me connecting it to my router do the trick? Can I then use the LAN ports in the back of the capsule like I would a network switch? Can I just disable the wireless router part of the capsule as I already have an ADSL2+ Wireless Router.
    Thanks

    I wanted to run a cable upstairs from the switch downstairs so the Time capsule becomes my upstairs switch (as I only have Wireless upstairs at the moment. That will work right?
    Cheers.
    Yes, that is also fine.. ethernet being the cable you run.. !!
    You still don't have to use a TC.. which is still a rather expensive box for the job.. an Airport Extreme would offer the same exactly minus hard disk for cheaper price and more than likely better lifespan.. TC with internal power supply run too hot.

  • I've just changed my modem, and I can't find my time capsule

    I've just changed my bigpond modem, and have joined all my other hardware to the new modem (Apple TV, iphones, iMac etc), but now my time machine can't locate my time capsule which was used as a back up.  it just doesn't appear in Airport Utilities.  Have rebooted everything, and the internet connection is fine, but that **** amber light won't stop blinking.

    I'll guess that "bigpond" unit is either a router or a combination modem and router.  You can probably get AirPort Utility to "see" the Time Capsule if you connect your Mac to it with an Ethernet cable.  Then you can see why the Time Capsule isn't happy.  If the two devices are too far apart to make a cable feasible, then do a "factory default reset" of the Time Capsule and reconfigure it.

  • Hi, I've recently bought an iPad2 and can't get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading. Apparently it is

    Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
    Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
    Your help will be highly appreciated.
    Thank you.
    Luis.

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Can i use my time capsule as wireless storage and not as a router too?

    hi there i just bought my self a time capsule its a 500gb one as i do not need the 1tb+ storage.
    i play a lot of online games and have a fast router so i do not want the time capsule for its router capabilitys i only want to use it as a wireless storage unit is this possible to do?
    if not i can connect a usb storage to my current router and use that as my wireless storage if so where is the best place to sell this time capsule?

    You simply bridge the TC and plug it into the existing router.. it will then provide network storage..
    Can connect either via the existing router or the TC.. if you set up wireless correctly.. if it is a gen1 you can set to 5ghz only.. that will keep it from interferring with the existing router.

  • I have a uk iTunes account but have moved to the Netherlands and can no longer connect to the iStore from my iPad. Do I need to update my iTunes account to a Dutch one?

    I have a uk iTunes account but have moved to the Netherlands and can no longer connect or make purchases. Do I need to change my account to a Dutch one?

    You can't transfer any content from one account to another account (nor can accounts be merged) - all content will remain tied to the account that downloaded it.
    Do you not have copies of all of your downloads e.g. on your computer or backup of your downloads/library ? Whilst you are in Australia you can't redownload your UK purchases (you have to be in a country to use its store), if you have them on your computer's iTunes library then you should be able to stream them from it to your Apple TV

  • I have iBooks 2.1 on ipad. I changed my password and can no longer update the app. If I delete the app and install the updated version, will I lose the books I have purchased?

    I have iBooks 2.1 on ipad. I changed my password and can no longer update the app. If I delete the app and install the updated version, will I lose the books I have purchased?

    Try logging out of your account on the iPad by tapping on your id in Settings > iTunes & App Stores and then log back in and see if you can then update the app.
    If you do delete the app then you should be able to re-download your ibook purchases via the Purchased tab in the ibookstore in the app. But in case some of them are no longer available in the store and/or you have PDFs or epubs in it, then you could first connect it to your computer's iTunes and do File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11) which should copy them over to the Books part of your iTunes library so that you have your own copy of them and can sync them back (even though they aren't iTunes purchases it should also copy over any PDFs or epubs that you have in the iBooks app)

  • HT1212 My daughter changed her passcode and can't remember it.  We had not done a back-up in a while so I'm not sure what to do.  Should I restore the factory settings?

    My daughter changed her passcode and can't remember it.  We had not done a back-up in a while so I'm not sure what to do.  Should I restore the factory settings?

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Can i use my time capsule to extend my wifi signal without physically connecting it to my router?

    I currently have a BT Homehub connected to a modem, which is connected to the ethernet port in my wall (which is downstairs). I bought a timecapsule to wirelessly back up my computer. It is connected via ethernet cable to my router. I have recently been having trouble getting a wifi signal in one room in my house (upstairs). To fix this i was wondering whether it is possible to move my time machine somewhere upstairs, to a location closer to this room, and have it transmit a wifi signal without it being connected to my router via ethernet. And if so how would i go about doing this?
    cheers
    jadidev

    Can i use my time capsule to extend my wifi signal without physically connecting it to my router?
    Yes, if you have an Apple router.
    No, if you have a BT router.
    IF....your Time Capsule is currently set up to provide a wireless network signal, you could add another Apple device...like an AirPort Express....to extend the Time Capsule wireless signal.

  • Ow can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

    How can I use my time capsule as a time machine backup without using it wirelessly and not as a wireless router?

    bzb888 wrote:
    I have a wireless transmitter already, would like to use the capsule just as a back up drive, I tried hooking up from the ethernet port on the imac to the one of the ports on the capsule but then my Wifi would not work. do I hook the cable to the port with the circle or the arrows?
    It is better to have the TC as part of the main network in bridge. You do not need to run wireless.
    If you want to use the TC plugged in by ethernet and still use wireless for internet, that is possible but the setup is rather more complicated.. the computer must not get confused about which device to use as a gateway or dns server.
    See info in this thread on setting this up.
    https://discussions.apple.com/thread/4817218?tstart=30
    I need to add.. a USB drive would be cheaper, faster and more reliable. It is really poor use of a TC.

Maybe you are looking for

  • Character encoding in web gallery

    Hi, When creating web galleries, LR seems to use UTF-8 encoding for it.. Can I change it to use ISO-Latin-1? I use mostly Finnish in the galleries, and UTF-8 causes some of the Finnish characters to show incorrectly. A test gallery where you can see

  • Connecting iPad to older Mac

    I just bought a new iPad and tried unsuccessfully to connect to my iMac - OS X 10.4.11 It has powerPC chip. The icon says i need OS X 10.5 or above to work, but I understand OS X 10.5 only works with Intel. I dont really want to replace the iMac yet

  • Displaying Single Datablock field in Multiple Record Data Block

    Hi all I have a master detail block for cash transaction recording. Master Table name CahMaster and datablock contains columns Cash Bill No, Date, Customer ID, Misc Freight Charges. Detail Table name is CashDetail and datablock includes product id, p

  • Anyone know where i can get my ringtone icon back on my itunes?, Anyone know where i can get my ringtone icon back on my itunes?

    Does anyone know how i can get my ringtone icon back on the left column of the itunes? got a new laptop and then downloaded the new itunes and now dont have it and i really want my ringtones back on my phone.... Thanks Dee

  • No way of voice recording?

    After some web research I found that the iPod Mini doesn't support voice recording the normal way (by simply plugging in a 3rd party voice recorder). Isn't there any other way of making the Mini suitable for voice recording? Thanks in advance! iPod M