Changed setting per suggestions, updated, unplugged then replugged and still NADA, no sound! Argh, so frustrating.

I've tried all of the setting changes noted in others help questions regarding the no sound issue with Apple TV but still no sound. Am I missing something? And considering this is an apple product I don't think I should by adapters for my TV to translate or whatever the HDMI issues. It's called Apple TV, TV is the keyword, should work with my TV as is. I can understand downloading updates, but at this point it's frustrating that it's updated, I've made all setting changes, unplugged it, replugged it, restarted and it's not the first time this is like the fourth time in the last few weeks, it's ridiculous. I seriously regret buying this, I thought it would be as user friendly as my iPhone and Mac, now I just want to smash it. Any other suggestions, as you can read I am frustrated at this point.

Your computer does have an integrated sound card. This means that the sound card is integrated with the motherboard. If you had contacted tech support then you might have tried all the basic steps.
Run the "Hardware diagonistic test" for Sound and check if it reports any error. By looking at your description it looks like the sound card has gone bad and to resolve this you need to get the motherboard replaced within the warranty period. The other option will be to install a PCI Express 1x sound card and its drivers. This card will be available in any computer near by.
After installing the card you need to boot the computer to BIOS(tapping F10 key during startup) and go to Advanced and disable the on-board audio. Installing sound card should be tried only if you dont want to send the computer for service to replace the motherboard.
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Similar Messages

HT3702 i have updated my billing information and still can't update the existing Apps. I changed the credit card and still same problem

I have updated my billing information and still can't update my existing apps , i ahve changed the payment card and still same problem ,what shall i do ?

It's a credit card, not a debit card ? As far as I know that message will show if you are trying to use a card that was not issued by a bank in the same country as where your iTunes account is based (and you need to be in that country). If you are sure that it is then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

After my latest update my music wont load on ipad i just get a blank grey screen and no music titles yet when i check usage it says music is there, ive tried unsync it then redoing and still nothing

after my latest update my music wont load on ipad i just get a blank grey screen and no music titles yet when i check usage it says music is there, ive tried unsync it then redoing and still nothing

Rebooting will not make you lose any content. Rebooting is when you hold the home button and the sleep button down at the same time until the Apple logo appears on the screen.
You can these suggestions. One might work for you.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

When I go to open lightroom a message pops up and says "lightroom encountered an error when reading from it's preview cache and needs to quit" I have already restarted my computer, that didn't do anything. I then uninstalled and then reinstalled and still

When I go to open lightroom a message pops up and says "lightroom encountered an error when reading from it's preview cache and needs to quit" I have already restarted my computer, that didn't do anything. I then uninstalled and then reinstalled and still getting the same response.

Open the folder containing your Lightroom catalog. Locate a folder with the extension .lrdata and delete that folder. Do not delete anything else. Then restart Lightroom. It will start building a new previews folder.

Display/Change setting per dashboard

Steps
1) Start at project dashboard.
2) Click "User Settings" button.
3) Look at "Processing Mode" option. It has two values in the drop down: Display and Change.
We are of the understanding that if we make the setting for this field "Display" then whenever we enter a project or task we will be in display mode and not able to edit until we click the "Display/Change" toggle button that displays when we are looking at a project element.
Our team is wondering if we could make this setting such that a user is always in display mode when they enter a project from the project dashboard. In addition to this, we always want a user to be in change mode if they enter a task from the task dashboard.
Is anyone aware of a way to make this display/change user setting dashboard specific?
Thank you,
Wendy

Hi
You can do this setting while maintaining the user. This settings are user specific.
goto SU01=>enter your user=>Personalization tab=>double click the Personalization object key DPR_USER_SETTINGS=> One new window will open in that under General you can define the Processing mode either Display or Change as per your requirement.
Please try with this.
Regards
Yogesh
Please award points if answer is useful
Edited by: Yogesh Pande on Nov 19, 2008 11:31 AM

Can't Power Up Without Unplugging Then Replugging

I'm almost positive this is my fault...
My PowerMac G4 is plugged into an outlet which is turned on an off by a lightswitch on the wall. The lightswitch has been bumped a few times, and even though I tried taping the switch to hold in the up (on) position, the bumping has occasionally shut off the power.
A few days ago, after turning my computer off the night before (the cofrrect way, using the computers power button), I pressed the power button to turn the machine on and nothing happened. The computer did not turn on.
*I unplugged the computer and then plugged it back in. Then I pressed the power button and the computer turned on!*
This is an ongoing pattern. The computer will NEVER start up from shut down without unplugged and replugging it in.
I've tried two trouble shooting tests: I've changed outlets and I've swapped power cables. No luck. Is this a Power Supply issue?
PS: Since I've gotten the computer, I've put in a new Radeon 9600 Pro graphics card, a Sonnet Allegro USB 2.0 card, and two Kingston 512 MB RAM sticks.
Thank You.

I would check the battery first. When mine went, I had no response from my Mac at all; just a light on my power button; absolutely no boot at all.
Check out things in Texas Mac Man's Battery, PRAM, PMU tutorial on the subject. His tutorial is a little dated (don't believe it even mentions G5's, or Intel Macs) but the info in it, except SMU and SMC not being included, still applies.
DALE

HT201401 I tried to do a suggested update to my 3 and it killed the phone, says it cannot restore it either. What is next?

How can I restore my 3G I Phone. I tried an I Tunes update from my computer and it wiped my phone. All I get is a picture of a cord attaching to I Tunes and the message on my computer saying unknown error, cannot restore. Really, let's get real here--

There's more to the error message; specifically, an error number. Without knowing that number no one can help you.

I am trying to download microsoft office and it comes up "apple" and then password. I just put in my apple password that doesn't work. I type over "apple" and put my id in and then password and still no luck. Any suggestions please?

I am trying to download microsoft office mac but it comes up "apple" and then on new line password. Have put in my apple password with no luck then typed over apple and put in my id and then password but still no luck.

OS X Lion>: How to Easily Reset the Administrator Password

I have five iPads, four for my classroom and one that is personal. How can I change my Apple ID on the personal iPad and still keep the apps? Thank you!

I have five ipad ii products. Four of them I use in my classroom and one is for personal use. How can I change my apple ID on my personal iPad and keep all of the apps (i.e. Kindle). I do not want it connected to my school iPads.

All app purchases are permanently tied to their Apple ID. You will have to delete and repurchase the apps with a new ID. I would recommend wiping that iPad and setting it up with another ID.
~Lyssa

Unresponsive iPod - working until I unplugged, then replugged.

So I was trying to get the "Sync" button to work (it was greyed out on my laptop) so I unplugged and re-plugged my iPod. However, now it doesn't do anything - restart does nothing, I can't even reset it to factory settings. The computer doesn't register it officially, but it does make that noise when I plug it in and unplug it. Any suggestions? It was working perfectly fine until I unplugged/replugged it in.
iTunes may pick it, up, but it's telling me that the iPod is giving me an invalid message...

Glad it worked!
BTW, a PDF iPhone iOS 5 user guide is here. You can also download it as a free iBook.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

HT1918 Hi, I changed my address in bank first, then itunes and now even when I want to dowload free apps or updates it asks me for validation of payment and security code but, Everything matches my info and the system DOES NOT TAKE IT, what can i do?

It is very frustrating even to receive an email from itunes support telling me: well, if your code or card are not working call your bank, which I did and everything is fine, it matches with existing acct in itunes...
then I tried and tried and time after time I keep getting the same stupid answer "invalid security code"
I am tired of it!
And then I contacted support just for an idiotic answer: well, use an itune gift card then.... Come on! Are they really not goint to do anything to help me and restore my info in the itunes acct?????
Can someone tell me what to do, please! I am telling you... its frustrating I cant even update because the stupid system keeps asking me for the security code of my card!!! And it is the correct one!!!
HELP!
ChapinaZ

I'm also on iPhone 4, iOS 6, and have exactly the same problem. I've tried resetting privacy settings, turning restrictions on and off, deleting and reinstalling apps. Nothing seems to work. The lists of apps in privacy settings are all empty, except for location services. When using Tweetbot the app is regularly asking for permission to access my twitter account, but even when I allow that, the app doesn't show in privacy settings.

Software updates do not install because "restart" fails. Powered off then on and still will not complete the updates. What can I try?

Recently noticed software updates were not occuring. "Restart" will not complete and tried just powering off and all but still no luck. Not real savy on troubleshooting so need some step by step advise.
Thanks for any help.

Which os is installed on your computer?

HT203977 After Update my phone from IOS 7 to 8 . m phone become really bad losing signal all the time now i did update to 8.1 and still losing signal appearing gprs on display at place of 4 g or 3 g and the needs turn to Airplane mode and come back to

After update my Iphone 4 s to ios 8.1 this device keep losing signal from 3 G and wifi , to fix that is necessary to me turn on and off airplane mode ,
How can i fix this mess from Apple ios 8.1 ??? I do not have this problem before when was ios 7

hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end?

TS3297 I updated to iOS 6 and still cannot (reliably) connect to the App Store.

I have tried the date change. And have signed out and in of iTunes multiple times

Common problem but I have not seen a solution yet.

Changed setting per suggestions, updated, unplugged then replugged and still NADA, no sound! Argh, so frustrating.

Similar Messages

Maybe you are looking for