Changed Ulimits values for the Oracle user and getting error -bash: ulimit: max user processes: cannot modify limit: Operation not permitted when logging in.
I'm trying to increate the ulimits for max user processes and open files for the oracle user. I've set the values in limits.conf, /etc/profile and in oracle's environment scripts. Now when I log in as oracle I get the below errors. If I change the ulimits back to the original values errors go away but ulimits aren't changed.
login as: oracle
[email protected]'s password:
Last login: Fri Mar 6 09:56:02 2015 from mtkadmin12
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
[oracle@servername ~]$
Thanks for the update.
I modified the /etc/security/limits.d/90-nproc.conf and added a line for oracle and also modifed the oracle.sh file. The ulimits are setting correctly when I su - oracle but they are still wrong when sshing in as oracle.
[root@mtkdevorap11d-1 ~]# su - oracle
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 1030982
max locked memory (kbytes, -l) 94371840
max memory size (kbytes, -m) unlimited
open files (-n) 65536
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) unlimited
cpu time (seconds, -t) unlimited
max user processes (-u) 16384
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$
[oracle@mtkdevorap11d-2 ~]$ ssh mtkdevorap11d-1
Last login: Mon Mar 16 13:04:16 2015 from mtkdevorap11d-2.conveydev.com
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 1030982
max locked memory (kbytes, -l) 64
max memory size (kbytes, -m) unlimited
open files (-n) 4096
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) unlimited
cpu time (seconds, -t) unlimited
max user processes (-u) 16384
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$
Similar Messages
-
-bash: ulimit: max user processes: cannot modify limit: Operation not permi
Hi,
Installed 10g Forms&Reports only on RHEL 3ES.
Modified /etc/profile according to Oracle's documentation:
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -n 16384
ulimit -p 16384
else
ulimit -u 16384 -n 16384
fi
fi
But when I logon to the server, the following message shows:
"-bash: ulimit: max user processes: cannot modify limit: Operation not permitted"
What is the problem here?
Thanks
StephanHi,
Installed 10g Forms&Reports only on RHEL 3ES.
Modified /etc/profile according to Oracle's documentation:
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -n 16384
ulimit -p 16384
else
ulimit -u 16384 -n 16384
fi
fi
But when I logon to the server, the following message shows:
"-bash: ulimit: max user processes: cannot modify limit: Operation not permitted"
What is the problem here?
Thanks
Stephan -
Trying to install creative cloud for the first time and getting error code:1
im trying to install creative cloud for the first time but im getting a error code:1
what can I do?Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium -
Default values for the controlling area and language
Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant GokhaleHello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks. -
Creation of a Query to show the values for the current month and the last 12 months data.
Dear All,
Good day!
I have to create a Query with the below requirement.
I have to create a Query to show the values for the current month and the last 12 months data.
Can you please guide me how to achieve this ??
thank you,
Regards,
HemaHema
explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
for some more hints..
http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
http://scn.sap.com/thread/3217381
search on SDN you will get many other ways..
Thanks,
Bhupesh -
Need to set default values for the fields plant and location in ME21N
Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advancehi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam -
Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card and the same.why???????
I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
What happened is that my garage band looks like it will open then it shuts down.
I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
I really hope I don't have to erase it.
It'll say it's ,lading my songs then it shuts down .
If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
Thank you
Simachyahi -
Compare previous row values for the same id and decide
Hello ,
I have this sample data
create table #student_academic
pk_id int identity(1,1) primary key ,
student_id int ,
[year] int,
[aggr_marks] float
insert into #student_academic
student_id ,
[year] ,
[aggr_marks]
values
(112,2012,55.4),(113,2012,65.4),(114,2012,82.32),
(112,2013,75.4),(113,2013,91.22),(114,2013,45.45),
(112,2014,61.2),(113,2014,95.2),(114,2014,75.6)
select * from #student_academic
from the above data i have to generate an extra status column. this status column should be decided by comparing the previous row value. the exact output should be like below.
student_id year aggr_marks Staus----------------------------------------------------------
112 2012 55.4 None
112 2013 75.4 Promoted
112 2014 61.2 Demoted
113 2012 95.2 None
113 2013 75.6 Demoted
113 2014 91.22 Promoted
113 2012 45.45 None
113 2013 65.4 Promoted
113 2014 82.32 Promoted
is there any way to write the t-sql with out using cursors ? this table has around 25GB of data. Any idea would be appreciated.
Thanks in advance.Hello,
The difficulty of your example is
that there are several rows for
the same year and the same student.
I present a solution
if there is
one line per year per
student:
TRUNCATE TABLE #student_academicinsert into #student_academic
student_id ,
[year] ,
[aggr_marks]
values
(112,2012,55.4),(113,2012,65.4),(114,2012,82.32),
(112,2013,75.4),(113,2013,91.22),(114,2013,45.45),
(112,2014,61.2),(113,2014,95.2),(114,2014,75.6)
Go
WITH CTE AS
(SELECT pk_id, student_id, year, aggr_marks,
(SELECT TOP 1 aggr_marks FROM #student_academic AS b
WHERE a.student_id = b.student_id AND a.year -1 = b.year
ORDER BY student_id) AS prev_aggr_marks
FROM #student_academic AS a
SELECT
pk_id, student_id, year, aggr_marks,
CASE
WHEN prev_aggr_marks IS NULL THEN 'None'
WHEN aggr_marks < prev_aggr_marks THEN 'Demoted'
WHEN aggr_marks >= prev_aggr_marks THEN 'Promoted'
END AS Status
FROM CTE
ORDER BY student_id, year
Regards,
Charlie
Charlie Dancoisne - Independent Consultant & Trainer (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Please clarify rules for the buy iphone and get $200 off ipad
Buy an Iphone and get $200 off an ipad----This offer is posted on the home page of Verizon but I cannot get it to work on my plan even though I have upgrades on 2 lines. It will not let me do it. Could not get through on customer service- cut off after waiting an hour and no local store knew about this offer.
Sweeneys we'll clear up the confusion! The promotion is available when trading in your current iPhone and upgrading to either an iPhone 6 or iPhone 6 Plus. For all the details on our Trade in and Trade Up Promo, please visit http://bit.ly/1i1vrCu
AshleyS_VZW
Follow us on Twitter @VZWSupport -
How do you sign up for the MORE program and get the 50MG for free?
I was told that if you signed up for the MORE - Cloud program you will get 50mg for Free? I didn't receive that. Anyone know how that works?
Hello skyles!
I have great news! If you have the More Everything plan, you get 25GBs of cloud storage. That's a bunch more room than 50MBs! Here's a link to check it out: http://vz.to/1eTSQHd
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport -
I have purchased and downloaded minecraft and followed the instruction to get java se6 runtime..... but this does not work.....it seems there is a loop in the process...... can anyone help with this????
upgrade your browser to Firefox 8 and check
* getfirefox.com -
I just purchased ExportPDF and have tried to convert a PDF file to *.docx and *.rtf for the first time. In both cases I get a file that says there was an error is accessing the online service. What do I do?
Could you try these steps to alleviate the access issue you're having:
Choose Edit > Preferences (Win) or Adobe Reader > Preferences (Mac)
Click 'Online Services' on the left-hand side
Sign out of our Adobe ID and sign back in.
Try to convert your document again.
If you continue to have trouble, please verify that you can access the service via the web interface. To do this:
Open a browser and navigate to http://exportpdf.acrobat.com/signin.html
Try to log in with your Adobe ID (email address) and password
Once logged in, follow the on-screen prompts to convert a file
Let us know if you're still having trouble and we'll try to help!
-David -
Just joined up with the Adobe CC, and get error U44M1l210
Just joined up on the Adobe CC, and lightroom installed and updated fine, but when installing Photoshop, it errors during the install with U44M1l210.
I then went back after running each app, and tried to update, again still the same error on failure. Looking around, I saw that I should try and remove the app, and reinstall.
After the removal, reboot, and reinstall I still got the same error. I then tried to use the in-program updater, which is said there were updates, but again it ended with the same error.
I don't see anyplace to just download the update and install it manually, if there is one, maybe someone can give me a pointer.
Asking for more detail in the CC app, it says the following:
Update Failed
Unable to extract the downloaded files. Press retry to download again.(U44M1l210)
Needless to say I have tried each option many times over, and am at a loss where to go next..Hi,
I'm in the same situation as you. I've done a new install of CC on windows 7 64-bit, the initial app install worked but all patches/updates failed to install via the Creative Cloud manager. I got the same error code as you.
I installed the updates manually from http://www.adobe.com/downloads/updates.html and that worked. However, the Creative Cloud Manager is complete oblivious to the fact that the apps are now up-to-date and is still telling me there are updates, even after a reboot. When I clicked on the install button in the hope that this would sort it, it fails with the same error code.
So this is only half a solution. You can update your apps by downloading manually from the website but it doesn't sort the problem with the Creative Cloud manager and will be a real hassle going forward - I'm using quite a few of the apps not just one or two.
Any solutions greatfully received -
Hello, Just bought a new camera, Tried to import files to elements 12 on the Mac and Elements 10 on Windows... Both computers I get error message:Nothing was imported. Files or folders selected did not contain any supported files... They are Raw (new) files.. It is the only files I had ever imported and it has always imported them in the past.. What could have changed?
Hi Daytrip589,
Just wondering if you're situation has been resolved. I have a similar problem with PSE 11, getting the message about nothing was imported. I shoot RAW, have imported with this camera before ( a Canon G15) but couldn't the last time I tried. Cheers, Glenn. -
When I am doing the PGI for the delivery i am getting error message
Hi All,
Could you please help to solve this issue,
When I am doing the Pgi for one Delivery I am receiving the error message "Posting only possible in periods 2008/03 and 2008/02 in company code", please help to provide the step to resolve this issue.
Regards,
Muralikrishna Nandigama.Dear Friend,
Make sure you have sufficient quantity in the stocks
The open posting period for your company code is 2008/03 means "oct Nov december" and "Jul aug sep"
So the posting will be possible only in these periods.
Go to TC: OBYC and maintain the posting periods.
Open or close the periods.
You can as well use tC:OB52
CHANGE VEIW POSTING PERIODS SPECIFY TIME INTERVAL: OVERVEIW
edited by,
Amlan Sarkar.
Maybe you are looking for
-
Bluetooth trouble with Mac Pro
Hi I have recently bought a D-Link DBT-120 Bluetooth Adapter for my Mac Pro and i am losing connection with my devices on waking the Mac Pro from sleep, both my Logitech Bluetooth Mouse and a Jabra headset. Typically I need to disconnect and reconnec
-
When using the Map feature on my Ipod Touch, and dropping a pin - I cannot move the pin to the exact location. When I tap on it and try to move it, the whole map moves with the pin. Am I doing something wrong? What is the correct procedure?
-
RE:Application Server Control Configuration Assistant":
Hello all! I'm trying to install Oracle 10g reports server but get the following error ================================================================================================================ Output generated from configuration assistant "App
-
Print pdf from another frame in IE via javascript
I am responsible for a little web application. There we have 2 frames. In one frame is an pdf-file, this frame is not visible for the user. In the other frame is an button. By clicking the button the pdf-file should be printed. The onclick event hand
-
I know that every thread has it own stack which is not shared with the other threads. Now for example, I have a program like: Whenever a user connects to the server a separate thread is created and receive method is called. mythread = new thread(this