Changelog for Spain in spanish, not catalan in goo...

this is a complaint from users from Spain: Spain skype equipment and Iberian microsoft are disrespecting Spanish users. disrespectfully added the list of changes in Catalan language, being the official language of Spain, the Spanish. many users are getting annoyed by this provocation and incitement to hatred. this is happening in the google play store in Spain.

Hola,
I can see that https://play.google.com/store/apps/details?id=com.skype.raider&hl=es correctly shows the text in Spanish, while https://play.google.com/store/apps/details?id=com.skype.raider&hl=ca shows the text in Catalan (note the last two characters). So from Microsoft side this is configured correctly.
Sorry to hear that you are not getting the languate you expect, but that is either due to your browser, phone, OS settings, or due to Google, who manage Google Play, misunderstanding your language preference.
Does the problem persist? Do you also get it in your PC browser when going to https://play.google.com/ and searching for Skype?
Muchas gracias.

Similar Messages

  • Why are holiday for Spain shown in Catalan in calendar and not SPANISH? How can I change this?

    Why are holidays for Spain shown in Catalan in calendar and not SPANISH? How can I change this?

    Try subscribing to a different calendar.
    Calendar Holidays
    Calendar Holidays (2)

  • Is it possible to change the spell check dictionary in "pages for iPad" from Spanish to UK English?  The app was downloaded in Spain.

    Is it possible to change the spell check dictionary in “pages for iPad” from Spanish to UK English?  The app was purchased in Spain and I am living in spain temporarily

    Spell checking should be based on the keyboard layout that you've got selected in Settings > General > Keyboard > International Keyboards - if you have an English 'UK keyboard' selected then the spell checking should be English

  • VAT for Spain

    Hello all,
    could you, please, help me with this?
    Since 1st of january spanish VAT numbers validations rules seems to have changed.
    Up to now we have noticed that letters have been added in 3rd and last position:
    For example: ESW0601104C 
    ESY0041572W
    The setup in SPRO for Spanish vendors only indicate the lenght of the VAT for Spain but not its composition and it seems that this is SAP dependant configuration.
    Can you please have a look where this configuration is and if there is an OSS note related to this subject?
    Thanks a lot and I wish you a nice day
    regards
    Hana

    Hello ,
    thanks for this note, it helped me a lot
    but still have a question.
    At the moment we have got in our system the following letters to be used as a first digit:
    A, B, C, D ,E ,F ,G ,H ,P , Q, S so witg the note you sent to me (thanks once more) we would get letters like U, R, V, J, W
    but the VAT that we need to use in SAP for vendor is ESY0041572W , which means Y as a fisrt digit
    Plus we were asked for more letter L M K X Y N
    can you, please, let me know if those letters are available aslo somewher?
    Thanks a lot for letting me know
    regards
    Hana

  • Vendor Bank Details - Bank control Key for Spain

    Greetings,
    Can anyone tell me how to maintain the bank control key for Spain in the vendor master data? I can see that Spain uses the key to check the combination of bank number and bank account number, and it looks like the validation points to table BNKAIN. However, where do I get the two digit bank control key (from the vendor?), and how do I maintain it in the table (this table is buffered)?
    Any advice you have would be greatly appreciated, and I will gladly assign points for helpful responses.
    Thanks!

    Hi Eric,
    Thank you for your quick response. My problem is not location of the field itself, but rather on what data to use to populate the field. There is no input help for this field, and the system issues an error message every time I try to populate the field. We ran a trace and discovered that the system appears to be running a check against table BNKAIN. I think perhaps I need to maintain that table, but cannot figure out how to access the table to maintain the entries. Do you know how to maintain this table, or is there a specific bank control key that should be used for Spain?

  • RFKORDES : PRINT SELF-INVOICE FOR SPAIN FOR PREVIOUS FISCAL YEARS

    Hi,
    our accounting department would like to print self-invoice for transaction from 2006/2007/2008 for tax audit. Unfortunately, it doesn't work. I get message :
    "Print report RFKORDES in company code ES11 has not selected any data for SAPE1"
    Message no. FB475
    When implemented few OSS notes for 2010 VAT Package for Spain.
    Does anybody knows how to fix it?
    Thanks
    Anthony

    someone please help me with this ..

  • Skype Number for Spain

    I'd want to get a Skype number for Spain, but the country is not listed among those available..
    However, I remember there were numbers available for Spain a while ago.
    Will there be numbers again anytime soon?

    Hi,
    I would like have information about available virtual number in Spain. Thanks

  • Bank Control Key for Spain

    Does anybody know how the Bank Control Key works for Spain.
    The help on the field LFBK-BKONT is not that helpful.

    Hi,
    This is a key for checking the combination of bank number and bank account number. Permitted length, characters and other country information for Spain are :
    The bank key has eight digits (4 positions stand for the bank number + 4 positions for the branch), is numerical, and without gaps.
    The bank account number has 10 digits, is numerical, and without gaps.
    The control key has 2 digits and is numerical.
    The bank key, the bank account number and the control key are checked simultaneously.
    If an error message is displayed when entering bank data, you should check whether data has been entered correctly. Here's a sample.
    Country           Bank key         Bank account       Control key
    Spain              00120345            0000067890            03
    Hope this helps. I had copied this from a note long back and can look for the actual note if required.
    Cheers !

  • VAT reporting for Spain and Italy

    Hi,
    we have a problem getting VAT report for spain and Italy. Trying to get the report RFUMSV20 for current month but it is giving an error saying " There is no data record for RFUMSV20 Ccode 2008 in Table TRVOR" Can I anyone help me with this?
    Thank you
    Priti
    Edited by: Priti Singh on Mar 13, 2008 7:06 PM

    Hello,
    If your tax config is correct and the GL accounts are updated, then check for some OSS notes. Probably, you need to apply one of those.
    Reg
    assign points if useful

  • Financial Accounting and requirements for Spain

    What kind of legal requirements are existing for start using SAP FI in Spain? Can we make the take over from the actual system to SAP during the year? Are there any special regulations for the number assignment?
    Please give me some advice about the legal requirments we need to take care for.
    Thank you.

    Well, there is nothing specific in this configuration which is applicable only for Spain. However, in FI, especially with bank processing and tax regulations, there are several specific developments (some of them are represented by notes) which should be taken into consideration with every project in Spain.
    To start SAP project during the year is a normal thing and requires regular cut-off procedure; there are no specifics for any country.

  • Administrative Boundary Data for Spain

    Hi,
    I have downloaded and installed the SampleApp data, including the Navteq Mapping section. I can use the Map Views provided in the SampleApp demo without problems.
    I now need to create Map Views in OBIEE that use administrative maps of a particular region of Spain. I understand from the documentation that Administrative boundary data for Spain is included (country boundaries as well as "administrative boundary data" derived from the NAVTEQ product that delineates countries, states and provinces, counties and cities as well as major highways and major roads). However, I do not see this data in the tables created after the Navteq import.
    Anyone can help? Are "administrative boundary data" at the region and city level actually included in the Navteq download?
    Regards and thanks for your help.

    Hi,
    I am pleased that you are having some success.
    There are many ways to do this. Take a look at copy table from one database to another to see some recommendations.
    There are also several available tools like FME which will help you.
    You could also ask your database administrator to do it for you. That is assuming you have access to one.
    On a general theme it makes the Forum much better if people enter some details, name etc, into Your Control Panel. We then know your name instead of 915002.
    Regards.
    Ivan

  • Suggestion: integrated Changelog for packages

    I searched this forum and couldn't find it suggested before, although it may be a little obvious:
    When pacman upgrade packages, I often wonder what has changed. To find out, I have to look at the homepage of the program if it's a new version, or check ABS CVS commit logs if it's a new pkgrel. Wouldn't it be nice to have something like 'pacman -Qc foo' or 'pacman --query --changelog foo' that would dump a changelog for the package? I know both RPM and Portage has this, it's very handy. Are there plans for this?

    wdemoss wrote:
    I have come across several discussions on this. The answer almost always comes to: the user can check the cvs logs and the user can check the release notes on the projects site.
    However, for arch, this is a good answer because arch generally does not do anything to the packages supplied by the projects. There are no distribution specific patches or back patches or anything of the kind generally. So you can actually read what the dist said it released and be very confident that is what you got. This is certanitly not the case with redhat, suse, xandros, etc... where distribution specific change logs are important.
    -wd
    how hard would it be to integrate the changelog posted to CVS into each package? I searched for previous discussions but came up empty.
    Also -- It's not neccesarily true  that arch doesn't touch packages... my last update mostly had release revisions
    # pacman -Syu
    Targets: kdemultimedia-3.2.2-2 libtiff-3.6.1-3 man-pages-1.67-1 mplayer-1.0pre4-2
    So what is the reason the changelog can't be included?  Is it too much of a change to the pacman DB -- or is it because it's not desired by the devs because then they would have to write changelogs, or something else?
    I, perosnally, would like to know why a package is being upgraded without looking in CVS (which seems to be a gripe not only I have) -- I would also like the option to just install packages with security fixes.
    /me shrugs
    //standsolid//

  • Changelog for v31.0.016

     Guys has changelog for this version of n82 has come? If not then users can comment on this please?
    Please reply for my posts also! Thanks in advance.
    N82 Just Rocks! V30.0.019
    Theres nothing in kudos, but to guide one is a great thing!

    psychomania wrote:
    The main new bug is the clock/date bug thats been discussed on other threads.  It only strikes if you set your alarm before midnight and switch your phone off overnight.
    Several other models have been hit by this silly bug too.
    Not had the pleasure of that bug, i always set a quick alarm of a night, normally after 12......and i don't turn my phone off either....all good for me.
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • Changelog for updates?

    I'm wondering if there is any sort of changelog for updates explaining the reason for the update.  I know the biggies get announced as news items on the main page, but, for example, we've had a lot of minor kernel updates lately and I've not seen much discussion why.

    The kernel updates, and quite alot of updates really, are simple upstream version changes.  You can check cvs (cvs.archlinux.org) for info on why a new PKGBUILD was checked in.

  • (Request for reporting available) is not coming in Cube

    Hi All,
    I have Cube & DSO.
    I  added fields in DSO & Cube.
    Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
    thanks in advance,
    Kiran.

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

Maybe you are looking for