Changer la couleur de font d'un graphique en fonction des données utilisés

Bonjour,
Je cherche à modifier les couleurs de fond d'un graphique comme ci dessous :
On a ci dessus 3 zones de températures correspondant chacune à 1 température différente.
L'erreur pour chaque température étant paramétré par l'utilisateur je dois pouvoir la changer en fonction ce qu'il aura rentré.
Existe il une méthode pour faire ca ??
Merci d'Avance

Bonjour,
Si j'ai bien compris, tu veux remplir le fond entre des valeurs définit par l'utilisateur.
J'ai fait un bout de code qui doit répondre à ton problème. Tu peux sur un graph, définir les courbes avec un remplissage. Le remplissage, peut être par rapport à 0 l'infini et même par rapport à une autre courbe.
Je te laisse jouer avec l'exemple. J'ai rajouté la possibilité de pouvoir changer la couleur de fond de chaque zone.
Exemple en LabVIEW 2012
Cordialement
MaximeR
.mesLeft{float:left} .mesInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898} .mesLogo{float:right;opacity:0.18} .mesLogo:hover{opacity:0.9}
Maxime R.  
  CLD - Certified LabVIEW Developer / Développeur LabVIEW Certifié  
  CLAD - Certified LabVIEW Associate Developer   
Pièces jointes :
MultiZone Graph.vi ‏19 KB

Similar Messages

  • I was cleaning the screen and it changed to a larger font on the start screen and I don't knoe how to get it back to regular size

    I was cleaning my screen and did not have it locked.  the screen enlarged and and cannot get it to go back to the normal size.  I tried shut down and restart but to no avail.

    This is asked and answered each day.  The forum search bar is on the right side of this page.
    It is also covered in the manual - zoom feature.
    Double tap with three fingers.

  • Modifier les couleurs de fond d'un graphique

    Bonjour,
    Je cherche à modifier les couleurs de fond d'un graphique comme ci dessous :
    Vous voyez ci dessus 3 zones de couleurs correspondant chacune à une autres température.
    Ni l'erreur ni la couleur n'est figé, je cherche donc à les modifier par programmation.
    Existe-t'il une méthode simple ???
    Merci d'avance !!

    Bonjour idem :  R_Thomas, La réponse a été donnée sur ce post http://forums.ni.com/t5/Discussions-au-sujet-de-NI​​/Changer-la-couleur-de-font-d-un-graphique-en-fon​...
    Merci de mettre en résolu les posts si la réponse donnée par MaximeR était bonne (avec un kudos)
    Luc Desruelle | Voir mon profil | LabVIEW Code & blog
    Co-auteur livre LabVIEW : Programmation et applications
    CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
    CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW

  • LabVIEW 2013 Changer la couleur d' un onglet

    Bonjour à tous,
    Je souhaite changer la couleur d'un onglet. Le noeud de propriété couleurs avant plan et couleurs arrière plan donne un resultat en lecture, mais refuse d'être commandé... Je n'ai réussi qu'à changer la couleur des étiquettes... Pour terminer, je viens d'installer Labview2013.
    Merci d'avance pour tout conseil
    Franck
    Solved!
    Go to Solution.

    Bonjour,
    Pour avoir plusieurs couleurs, il faut faire un click droit sur l'objet-->Avancé-->Autoriser plusieurs couleurs.
    Il vous suffit ensuite de jouer avec les couleurs disponibles dans la palette d'outil pour chaques onglets.
    Cordialement
    Paolo_P
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Travaux Pratiques d'initiation à LabVIEW et à la mesure
    Du 2 au 23 octobre, partout en France

  • Comment changer la couleur de fond d'un control type indicateur de vitesse ?

    Bonjour à tous,
    Je suis à la recherche de 2 choses pour une interface graphique pour une chaine d'acqusition.
    La première :
     - Comment changer la couleur de fond d'un indicateur de type "Gauge" pour donner une allure d'indicateur de vitesse.
    La deuxième :
    - J'aimerais afficher également cette vitesse de façon alphanumérique comme les afficheurs digitaux.
    Comment puis-je faire celà
    Merci à vous
    Bonne journée
    Z.

    Merci de la réponse en fouillant j'ai trouvé une partie de la réponse par contre pour l'affichage digital j'aimerais un affichage de ce type (cf pièce jointe)
    Pièces jointes :
    XL_Digital.jpg ‏5 KB

  • Je n'arrive pas à changer la couleur des puces aidez moi svppppp

    Je n'arrive pas à changer la couleur des puces aidez moi svppppp

    Si vous voulez dire que vous essayez de sélectionner une couleur personnalisée, utilisez la palette de cercle de couleur (marqué par la flèche rouge ci-dessous) pour changer la couleur du texte, des formes ou des graphiques. La couleur préréglée puces, ne peuvent être modifiés.

  • Text deleting when I try to change color or actual font

    I will try to explain. So say I have a photo (or blank canvas) and I have typed words on it. If later I go and double click the word (or layer, etc) so that I can change the color of the word(s) &/or change the actual font, it will just automatically delete the whole word(s) on that layer.... which means I have to go change the color &/or font again BEFORE typing anything, and then re-type it all. So I guess in other words... I guess the text is deleting when I try to change the color or actual font (after it's already typed). Sorry if that's confusing.
    (I have a Mac, and I am using the Photoshop that comes with the Creative Cloud subscription).

    Something is wrong here, the text should not delete when changing font, color or whatever.
    But try this. First off you don't need to double click to change the text atributes.
    Just make sure you are on the correct text layer, have commited the text but keep the text tool the active tool. Now in the options bar you can change any or all attributes (color, size, font etc). The text updates real time.
    You only need to select word(s) if you want that word to be in another color/font/whatever than the other words of that same text layer.
    If you want to change the attributes of more than one text layer in one go then you must select those layers before changing attributes in the options bar.

  • Changing the size of fonts in InDesign's menus and toolbars?

    Is it possible to change the size of fonts in InDesign's menus and toolbars? I'd love for the Control Panel at the top to be a bit easier to read.

    Thanks Bob, didn't see it anywhere but figured it was worth asking. I think the size is a little biased toward people with better vision than me but I guess I'll have to live with that.
    Jon

  • How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text?

    How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text? Please help! I'm technologically challenged.

    Most forms (99% or more) are created for simple text input, where you cannot change anything.
    The creator of the form could allow Rich Text input (which allows you to change font, text size, color, etc.), but frankly I have never seen such a form, and I wouldn't know how they look.  But I'm sure they would show some kind of controls to alter the text appearance.

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How to change the background and font color of a particular row in table

    Hi,
       i need to change the background and font color of a particular row. I am using textview as table columns. I tried to do it using semanticColor property of textview  but the font color get changed for the whole column. But i want to change the color of a particular row only.
       If anybody knows please help me(give an example if possible).
           Thanks and regards.
            Pankaj Kumar.

    Hi Pankaj,
    In your data source context node (context node which is bound to dataSource property of Table UI elemennt) do following:
    If data source node is model node: create a value node under data source node, cardinality 1..1, selection 1..1, singleton false. In this new node add value attribute and set property readOnly=true, calculated=true, property com.sap.ide.webdynpro.uielementdefinitions.TextViewSemanticColor .
    If datasource node is value add value attribute and set property readOnly=true, calculated=true, property com.sap.ide.webdynpro.uielementdefinitions.TextViewSemanticColor.
    In calculated getter method put your color calculation depending on conditions, like:
    return <condition>
      ? WDTextViewSemanticColor.CRITICAL
      : WDTextViewSemanticColor.STANDARD;
    Bind new created attribute with property semanticColor of textview.
    Best regards, Maksim Rashchynski.

  • How to change the default Typewriter font in Acrobat 9 Pro

    This is driving me nuts. Is there a way to change the default typewriter font in Acrobat 9 Pro?
    Thanks in advance.

    Use  the Typewriter Tool bar.
    For changing Font:
    For changing Font Color:
    Be well...

  • Can I change different background and font color on each records?

    Hi,
    I had a Data_Block which contains some records, I had a field name 'currency' which contains value such as (HKD, JPY, CNY, CND, USD etc..)
    Let there there are 5 Records contain in that Data_Block and I wanted to change the background and font color depend on the Currency value.
    I were using Set_Item_Property and change the Visual_Attributes that I had define. Well I guess that doesn't work since uisng the Set_Item_Property
    it will actually getting the last value and use that last value and changed to all the same color to that.
    I wonder is there a way to do that in Oracle you can change the field different color?
    Thanks
    David Willis

    Thanks You so much.
    Actually I were trying to look for that function at the User Manual but I couldn't find it because I remembered I had seem it some where.
    I guess I am looking at the Form4.5 user manual instead of the Oracle 9i Forms Developer.
    Thanks
    David

  • Why can I change the callout text font in some documents and not others?

    By experimenting I have determined that some documents that will allow me to add callouts also let me change the text font to a different font or font size.  Other documents that will let me add callouts will not allow me to change the text font. A specific example is that I can add callouts and change the callout's font in pdf's I create by printing from Word, but a datasheet I have from a manufacturer I use will allow me to add callouts but not change the callout font.  Why can't I change the font in callouts I add to the datasheet?  I am using Acrobat 9.5.2.  Thanks for the help.

    Thanks Bob, I didn't think of that, I suppose that would work.  Basically I would just like to have more text sizes to choose from in the drop down menu, I guess its more an issue of laziness on my part than anything else.  I could make a character style for it, but then I'd probably have 10 different character styles just to change the size of my text when it would be less hassle just to type in the size I need.  I was just looking for a quick fix default option that I was used to having at my old job.

  • Change size of all fonts in one fell swoop

    I don't care to do a Word-Pages contest but there is one feature of Word that I would like to use in Pages but I don't know how. Suppose I type a document using five or six different fonts. Then I want to change the size of all the text in the document to 16 points. I select all the text and then if I click on the font size icon in the menu it doesn't show 16. I click to open Font Panel but when I type 16 in the size space, it doesn't change any of the fonts. What is the secret to changing the size of all the text to 16 point in one fell swoop?

    Hello
    Don't worry. Other responses wheren't baffling. The posters are end users like you and they tell the truth.
    Select all
    If characters of several sizes are selected, the size rectangle in the tool bar is empty.
    Don't worry, click on it.
    You will get a menu which doesn't display 16 but display "Font Panel…"
    Select this item to get the standard Font Panel in which you will be able to enter the wished size in the rectangle just below the word "Size" (right top).
    Of course, some of us, accustomed to the program enter directly the Font Panel.
    Yvan KOENIG (from FRANCE dimanche 11 mai 2008 09:54:36)

Maybe you are looking for