Changes are not applying

I have made a couple of changes to a movie and they are not applying in the canvas.
EG - I have changed the colour of some text that appears. The preview icon on the clip in the timeline has changed the colour of the text, the preview in the viewer has changed, but the canvas hasnt. Also it isnt asking me to render which it usually would.

You can quickly force a render by lowering, then raising the opacity of the clip. There are also more involved/complex ways to replace a render.
-DH

Similar Messages

Changes are not applying to the reports

hi all
i have moved the RPD and catalog file to UAT there i got few changes
i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
so i again i copied same RPD and catalog to UAT now it is working fine,
why the changes are not applied to the reports that i have moved to UAT
is it mandatory to move RPD and catalog to the other environment ??
Thanks

Hi,
if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
If not you need to deploy RPD and catalog into UAT.
By,
KK

Changes are not applied when exporting to plugin

When I make changes to an image in Aperture (e.g. white balance) and then go to an editing plugin (Viveza, Dodge and burn,…) Aperture hands over the unedited file to the plugin. Can I change this beahiour or force Aperture to apply edits before editing with a plugin?

David,
This isn't normal behaviour at all. Are you sure you have the edited file selected when you choose to export to a plugin? For instance if Aperture is set to create a new version with each edit it'll create a stack containing all versions - if you then chose the stack when you export you could be selecting a pick that doesn't reflect your latest edits...
This is all I can think of at the moment. I've never seen that bug before. Aperture bakes in all of a selection's edits to either a tiff or psd file when choosing any plugin. You can't select to do otherwise.
There are exceptions with external applications when doing multiple passes, but that's an entirely different problem.

HT1386 When I try to sync changes from my playlist to my iphone the sync process gets to step 7, applying changes and then freezes up, the changes are not being put on my iphone. What do I do to correct this issue?

When I try to sync changes from my playlist on the computer to my iphone the sync process gets as far as step 7, applying changes, then freezes up and the changes are not getting to my iphnoe. How do I fix this issue?

Are all these songs associated with the same Apple ID or were some purchased on another account?
Are they tagged properly? In the library does it break an album out into several different albums with a few tracks each?
Check your sync settings for each device. Do you accidentally have only certain songs/albums syncing?

My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

My songs are not being copied to my iPhone and even the sync is not completing every time it just shows that changes are being applied but nothing is happening on my iPhone

Hello transcend94,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
iTunes: Understanding iTunes Media Organization
http://support.apple.com/kb/ht3847
Avoid using different versions of iTunes, or you may be unable to locate content, or may import or transfer content to the wrong location.
Best of luck,
Mario

Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, Shruti

You should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Changes are not reflected in Script output

Hi All,
i am facing a problem in SAPscript.
I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
please help me in this regard.

Hi,
Could you plese Check NACE whether your script is confiugring or not.
If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text.

Why when i make changes to songs in my itunes library and then sync, the changes do not apply on my ipod?

When i go to edit songs in my library, like changing the artists name or album, i then click sync and look on my ipod and the changes have not applied. I tried clicking the manage music manually box and to edit the songs manually from my ipod and still when i edit them and make changes on my actual ipod the songs are still the same. Any help?

I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

Redo log files are not applying to standby database

Hi everyone!!
I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow .
My standby database is open and Primary database is not started (instance not started) because only one database can run in Exclusive Mode as DB_NAME is same for both database. I run the following command on the standby database.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
It returns "Database altered" . But when I checked the last archive log on primary database, its sequence is 189 while on standby database it is 177. That mean archived redo logs are not applied on standby database.
The tnsnames.ora file contains entry for both service primary & standby database and same service has been used to transmit and receive redo logs.
1. How to resolve this issue ?
2.Is it compulsory to have Primary database open ?
3. I have created standby control file by using command
SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS ‘D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1.CTL‘;
So database name in the standby control file is same as primary database name (PRIM). And hence init.ora file of standby database also contains DB_NAME = 'PRIM' parameter. I can't change it because it returns error of mismatch database name on startup. Should I have different database name for both or existing one is correct ?
Can anybody help me to come out from this stuck ?
Thanks & Regards
Tushar Lapani

Thank you Girish. It solved my redo apply problem. I set log_archive_dest parameter again and then I checked archive redo log sequence number. It was same for both primary and standby database. But still table on standby database is not being refresh.
I did following scenario.
1. Inserted 200000 rows in emp table of Scott user on Primary database and commit changes.
2. Then I synchronized standby database by using Alter database command. And I also verify that archive log sequence number is same for both database. It mean archived logs from primary database has been applied to standby database.
3. But when I count number of rows in emp table of scott user on standby database, it returns only 14 rows even of redo log has been applied.
So my question is why changes made to primary database is not reflected on standby database although redo logs has been applied ?
Thanks

Trigger changes are not committing to the database

I have 9iAS and 9i DB both on my laptop.
I am having a problem in which a trigger run off a WHEN_BUTTON_PRESSED function is not committing the changes to the database. In the trigger I have:
1 record insert into table A.
1 record update to table B.
1 record insert into table C.
1 delete from table D.
None of the data is related.
I have tried various combinations of the below to get the changes to commit:
POST;
COMMIT_FORM;
Exit_Form(NO_COMMIT, NO_ROLLBACK);
MESSAGE('Got past COMMIT');
COMMIT;
CLEAR_FORM(NO_COMMIT);
ENTER_QUERY;
I am getting varying amounts of "FRM: 40508 Oracle Error: Unable to INSERT record" statements. Even so, many times the form would act as if the changes had been properly applied. But when I did a separate DB verification, I would see that the changes are not being committed. Also, most of the time the changes would also be reflected in the calling form queries, but when I exit, all changes are rolled back no matter how many commit stmts are in the trigger.
I have finally gotten the form to do what I want to do (the 4 steps noted above), but I had to add a FORMS_DDL('COMMIT'); stmt and I am still getting a FRM 40508, but at least the changes are appearing in the db.
Any ideas on why so many troubles in getting the changes to commit??? I have spent a ton of hours trying "what ifs" to see what might work. Also, this trigger is the only real "code" in the forms.
Kim

Brett -
You're probably right about the intention, but this is a place where people can come and share styles, ideas, and coding tricks, I don't understand why someone would say that. Additionally, I had a professor who was a complete momo that said that all the time (consequently, his lax attitude towards teaching crippled the IS program where I graduated and most likely will cause it to no longer be available). It's a personal peeve of mine, just to let you know where I was coming from.
Secondly, the problem I'm having may have to do with what you said, however I can't be sure. To give a better description of my scenerio, I created a form that allows the user to load information about an employee by querying a SSN. Most of this information is for display only. Six fields are available to be updated and I wrote a DML UPDATE statement that I placed inside a WHEN-BUTTON-PRESSED trigger. However, these changes won't be written to the DB because Forms is attempting to write my entire datablock, instead of just following the specified DML statements. I'm at a loss as to why this would happen, but for simplicity's sake, I would listen to ideas of how to suppress this from happening so only my statements are used when updating the DB. If you can help, thank you, if not, then thank you for your time.
Steve

Archive logs are being shipped, but are not applied

Hi everyone,
Some strange things are happening when I try to configure an Oracle Data Guard setup. Currently I am at the point where the configuration has been completed, and I just need to sync the standby database to the primary one. I can see in the log files that the archive logs are being shipped, but they are not applied on the standby system.
If I run "recover standby database;" manually in sqlplus I can see that it is trying to apply an archive log which is way too old (ORA-00279: change 9656498443 generated at 04/29/2008 08:45:08 needed for thread 1).
In the alert log I can also see this error: Warning: Recovery target destination is in a sibling branch of the controlfile checkpoint. Recovery will only recover changes to datafiles.
At this point I was thinking that the standby database might be on a different incarnation compared to the primary, but this is not the case, they are both in incarnation 6:
6 6 MVF 4023175798 CURRENT 48493546257 13-06-21
Does anyone have an idea how this could happen, and how I could fix this issue?
Thanks, JM.

The restore did not cause any errors to be displayed, so I assumed everything was ok.
That's fair enough.
One thing I think might cause this behaviour is that the backup on the primary database is incremental,
Yes...that may be an issue. Best bet is to re-run your standby creation.....as you are doing.
With version 11gR2 you also have the option of duplicate from active database which negates the need to copy your backupsets over to do the restore: I find it a much simpler process than the rman backup, copy files over, restore and then recover process.
http://www.oracle-base.com/articles/11g/data-guard-setup-11gr2.php
Something worth considering.

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

Selection criteria are not applied to summary fields on group footers.

I wonder if anyone can help me with this problem. I am using Crystal reports version 11.2, and my data source is a Sql Server view.
The records on the view have a date field, and I have selected all records within a given date range in "Selection Formulas".
The records are then grouped, and the Crystal summary facility used to summarise number fields on the group footers.
So for example, if my view contains four records, one with field "amount" = 2, one with field "amount" = 8, one with field "amount" = 6, one with field "amount" = 3, but only the first two records are within the valid date range, you would expect to see the first two records listed out at detail level, then field "amount" summarised at group level, with a summarised value of 10.
ie ....                record1                      2
                       record2                      8
                       group level total         10
This works fine when I run the report using Crystal's "print preview" facility. However, when the report is run from within an application written in C#.NET, the selection criteria are not applied to the summary field, so you get ..
                       record1                      2
                       record2                      8
                       group level total          19
I tried putting the date selection criteria at both record and group level, but that did not work.
I googled the problem and found an article explaining that Crystal first performs the record-level selection, then it creates the groups and totals up any summary fields, and only then does it apply the group-level selection criteria, which can lead to problems like the one I have described above. However, since I have put my date selection criteria at both record and group level, I do not understand why I still get the problem.
In one report I got round this problem by creating a formula that returned zero if the record date was outside of the valid date range, and returned the number field to be summarised if the date was valid, then summarising that formula, instead of summarising the number field directly.
In other reports I created one formula to set a shared variable as zero, then another formula to accumulate it at detail record level, then another formula to display the variable at the group footer. In other words, I did not bother with the Crystal summary facility at all, but created my own summary facility.
While googling the problem to see what other people did in this situation, I noticed that most fixes used variations of the "shared variables and formulae" fix to get round the problem.
The problem is that I have lots of complex reports and it will take ages to replace the summarised fields with shared variables and formulae. The reports were initially tested with "Print Preview" so we did not notice this problem until the C#.Net application was ready to use them. And I can't believe that you are simply meant to ignore the summary facility and re-invent the wheel by doing it all manually.
Please tell me that there is something simple that I have been doing wrong!!! If I have not given enough information for you to answer, please let me know.
Thanks,
Anne-Marie

Hi, Anne-Marie;
You may be running into a common issue that is docuemented here:
[SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
Regards,
Jonathan
Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

Have used Aperture for some time - at some point this stopped working - not sure when
workflow:
click photo and elect to use the external editor (Photoshop Elements 9)
Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
Have to change the type to 8-bit in Photoshop to start making changes
When done and I exit I am prompted to save the photo
On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
Other Things:
I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
Current version of Aperture is 3.1.3, Elements is 9.0
Any help/suggestions greatfully received

Try using psd. Some rerports indicate some confustion between the apps with TIFF. See:
https://discussions.apple.com/message/15921933#15921933
I cannot confirm, nor test, since I use PS CS5, and not Elements.
Ernie

Changes are not applying

Similar Messages

Maybe you are looking for