Changes are not reflected into SEM-BPS 1 layout.

Hi,
1st, I've included code in SAPAfterDataPut that copies data from SEM-BPS 1 into New Sheet.
Now, I've inserted a method in the sheet module of New Sheet. This method takes care of reflecting changes from New Sheet into SEM-BPS 1 layout. but, finally am not getting changes back to SEM-BPS 1 sheet.
I've tested this in excel (outside of BPS) and it works fine.
in BPS, I went into VB debugging mode (after inserting a break point) and I can see that change that has been made in New Sheet was reflected back to SEM-BPS 1. But, when i test the same out of debugging mode, am not getting the same result.
Looks like,after changes in New Sheet, SAPAfterDataPut is again being executed and is overwriting the changes that I made in new sheet.
Do i need to inlclude code only in SAPBeforeDataPut to reflect changes from new Sheet into SEM-BPS 1?
In excel (outside of BPS), this method works in such a way that, as soon as i make changes in Sheet2 will get reflected into Sheet1 without runnning any macro.
but, with same code, this doesn't work in BPS. (instead of reflecting changes to SEM-BPS 1, changed value in New Sheet is reverted back to original value that is same as the value in SEM-BPS 1)
Appreciate any ideas/thoughts on this.

Hi,
Usually you work with a second sheet in the following way: write a macro that copies the data from the SEM-BPS 1 sheet to the new sheet. In order to run that macro include it into the macro "SAPAfterDataPut" and set the flag in the check box of in the popup of the third screen of the layout builder. The system will call the macro after the data has been written to the sheet SEM-BPS 1.
There is a second predefined macro that the system will executed provided that the flag is set on the popup in the layout builder. This macro is called "SAPBeforeDataGet". It is called before the BPS reads data from the SEM-BPS 1 and should be used for transferring the data back to the first screen (similar to the coding you have done in SAPAfterDataPut). Using this macro should solve your problem.
I did not understand how the changes are transferred from the new sheet in your (stand alone) case. Unfortunately it sometimes does make a difference if you test a macro in a stand alone Excel or in the Excel inplace. Some features are disabled in Excel Inplace (by Microsoft!!).
Best regards,
Gerd Schoeffl
SAPNetWeaver RIG BI EMEA

Similar Messages

  • Changes are not reflect in PRD

    Hi All,
    i have an issue that is
    i want to be small change correction in one report in BI DEV system,the changes had done successfully with one transport request,when i transport the request into BI PRD which has been not reflect but in quality changes been accommodate
    suggest any one
    Thanks In Adv
    muraliv

    hi bhanu thank you for your response
    sap doesn't do magic i know ,but cahnges are not reflected into my production system ,it was the fact,i am not here to waste my time to post the unreliable things
    the released transport request ended with RC 4 but i didnt find any chane but in quality its getting reflected,
    i am also tried one more new request to my query and then release but i didnt work
    thnak you

  • Changes are not reflecting in the Quality

    Hi,
    These are standard SAP Components. I have imported the ESS and MSS Packages.
    Actually 3 Development Components are using in my application (Tra,TraTri and TraTre).Tra is the root DC.
    I have made  changes  to those objects and sucecessfully  build  without errors.
    After check-in all  activities  those activities are working fine in Development system.
    But those changes not refclecting in Quality system. So i was founded build log error in Consolidation.
    I was fixed the error in the Development system and build the components without build error.
    still now changes are not reflecting in the quality system.
    But out of 3 DCs(Tra,TraTri,TraTre) Tra and TraTre are working fine in Quality(changes are  reflecting) only problem in TraTri DC (changes are not reflecting in the Quality)..
    Please help me as soon as possible....Its very help full for me
    Regards
    Sudhakar Reddy A

    Hi Slava,
    very very thanks to you for the fast reply. but one thing in my side.
    When i release the activities after successful build, i export those changes and place them in the import queue of the consolidation system in the CMS.
    The export in the SAP NetWeaver Developer Studio packs all selected activities into a change request, and then places them in the import queue of the consolidation system.
    When the my system administrator imports this request into the consolidation system, the released changes are integrated into the DTR workspace of the consolidation system; the build server compiles the modified components.
    my system administrator findout build error in consolidation system:
    [wdgen] [Error]   .PersonnelNumberCheck: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Error]   .PersonnelNumberCheck.I_Employeenumber: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.E_Name: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
         [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Type: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_No: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Field: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.System: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V1: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V3: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V2: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_Msg_No: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Number: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V4: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Parameter: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Id: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Row: The mapping definition is inconsistent, the mapped context element does not exist.
         [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextValueAttribute EmployeeName [readOnly]: The context attribute has to be read-only. (Hint: As the mapped context attribute is read-only this attribute has to be read-only, too.)
    I was fix error in my development system with out any build errors. still now not working ...pls give me any suggestion.i dont have access to consolidation system.
    Regards,
    Sudhakar

  • Changes are not reflected in ODS

    Hi all
    Can anyone help me with this!!!!!!!!
    There is an ODS1 which gets data from transparent table. From ODS2 data is loaded into transparent table. Then the data is deleted from ODS1 and ODS2.
    Again the data is reloaded into ODS2 and then into ODS1.
    The changes are reflected in the ODS2 and changes are not reflected in ODS1
    Even after refreshing also changes are not reflected in the ODS1.
    what could be done??????
    Thanks
    Rani

    Hi rani,
    U need to check whether the changes are reflected in the transparent table once you reload it from DSO2.
    The reason might be, the key of the table might be different hence it might be adding records instead of overwriting or updating it. If there is any code used, check the logic whether u are appending or modifying the contents of the table. generally it should be modifying the contents.
    Hope this help
    Regds,
    Shashank

  • Changes are not reflected in Script output

    Hi All,
    i am facing a problem in SAPscript.
    I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
    First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
    I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
    please help me in this regard.

    Hi,
    Could you plese Check NACE whether your script is confiugring or not.
    If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
    Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
    IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text.

  • Changes are not reflecting in the discoverer workbook

    Hi ,
    I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
    The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
    Appreciate your help !!
    Discoverer Version 4i
    Thanks ,
    Vijay

    Hi West,
    Thanks for the reply.
    I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
    Thanks,
    Vijay

  • Changes are not Reflecting in WAD

    Dear Gurus,
    I got a problem in WAD. Changes are not Reflecting in My WAD. When i created NewQuery in WAD by just placing Chart & Saved it. After executing Chart is displaced.Again I updated the same query by placing table and saved it. After Executing Table is not displayed only previously saved Chart is displayed. Could any one Kindly solve my Problem.
    Thanks,
    Sony

    Hi Sony,
    SAP BI has HTTP Cache and the web templates are stored in the HTTP cache of the server. So, when you change a template and execute it again - the previous version which is stored in the HTTP cache is being retreived.
    To correct this, go to TCODE SMICM in the menu bar >> Goto >> HTTP Server Cache >> Invalidate -> Global in system
    Once this is done, ask basis to restart the java engine.
    I hope this helps you.!
    -Pradnya
    Edited by: Pradnya Rane on Sep 29, 2009 8:05 AM

  • Material delta changes are not flowing into CRM

    Dear All,
    material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
    Do I need to create the new product hierarchy also in CRM manually?
    Appreciate any inputs
    Raj

    Hi Raj,
    Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
    Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
    Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
    Then go to SMW01 and reprosess the struck Bdoc.
    Reward points if helps,
    Regards,
    Paul Kondaveeti

  • Changes are not reflected after editing and saving the chart in th WAD 3.5

    Hi all,
    I have to display the chart in the report using WAD 3.5. But after creating a chart and then when ihave to make extra changes again and save the same, the changes are not reflected. I can see only the previous changes.
    I am working on the chart for the first time. please let me know about the problem. My changes to the chart are not getting reflected.
    Please help.
    Thanks
    Rani

    How r u changing the graph??
    Hope you are doing a right click and selecting Edit Chart. Click on Refine.
    Then Click on Next till you get the button Complete. After you click on Complete, you save the Template.
    Hope you are following these steps.

  • Changes are not reflecting using af:resource for adding CSS

    Hi,
    I am trying to add new CSS file(say the name as customNew.css) to page template using af:resource tag, the changes are not reflected. Instead I see(using firebug) that, styles coming from different CSS file(say the name as customOld.css ) which configured on trinidad-config.xml and trinidad-skins.xml files.
    I was under the impression that, the new CSS file(customNew.css) will override the old css (customOld.css). So, CSS added using af:resource tag will not override any other CSS ???
    Any help will be appreciated
    Thanks,
    San.

    Hi,
    if you bring CSS to the browser through af:resource then this is not overriding any skinning definition. Skins can only changed in trinidad-config.xml file (which also can be done at runtime). Just adding a CSS file to af:resource wont do the trick here.
    Frank

  • Changes are not reflecting when de-implemented the SNOTE.

    Hi All,
    I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
    After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was  got appended due to implementations of note , now it is not getting removed. 
    kindly help me out.....

    Hi All,
    I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
    After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was  got appended due to implementations of note , now it is not getting removed. 
    kindly help me out.....

  • Changes are not reflecting in QA after transport

    Hi Everyone,
    I am having an issue with the transport in PI. After making the changes in development, i exported the tpz file to Quality. The changes got reflected. Then for testing purpose some changes were done in the Quality IR. Now i again exported the tpz file from dev to QA. But the same changes are not reflecting.
    Has anyone faced such a problem? Need your help experts.

    Hello,
    Check in IR > Environment> cache status overview. Is it in green status??
    Check if the import of .tpz file is successful in quality IR??
    >>Then for testing purpose some changes were done in the Quality IR
    Also, check if there are any conflicts in the IR of quality system??
    -Rahul

  • Changes are not reflecting in Quality server

    Dear All,
    We have recently installed the Portal 7.4 servers.
    Currently we are having two servers Development and Quality.We have Configured NWDI using CMS and created tracks(Defined run-time systems as Development and Consolidation)  we are able to checkin the activities at NWDS , when we are selecting the component in the consolidation and on  click of  import we are getting the message as import finished, but the changes are not reflecting at the Quality server. i.e in earlier 7.01 version when we imported , the ear was deployed automatically in quality but it is not getting deployed in the new version 7.4
    Regards,
    Ramana.

    Dear Ervin/Jun Wu,
    Thanks for the Responce.
    As per the given link the track is configured  with out any issues (When we are clicking on Deployment in the Transport studio it is opening new tab like below and we are not having any errors when we click on Start deployment nothing is happening)
    http://hostname:50000/webdynpro/dispatcher/sap.com/tc~SL~CMS~WebUI/Deployer?BS=EPD_PRTADEV_C
    Please check the below log regarding deployment when we do the import
    SDM-deployment-notification  Log file.
    20141028125231 Info :Starting Step SDM-deployment-notification at 2014-10-28 12:52:31.0994 +5:00
    20141028125231 Info :Deployment is performed asynchronously.
    20141028125231 Info :Following DCs are marked for deployment (buildspace = EPD_PRTADEV_C):
    20141028125231 Info :
    20141028125231 Info :RequestId: 152
    20141028125231 Info :==> no resulting DCs for deployment
    20141028125231 Info :Follow-up requests:
    20141028125231 Info :
    20141028125231 Info :
    20141028125231 Info :Step SDM-deployment-notification ended with result 'success' at 2014-10-28 12:52:31.0995 +5:00
    Regards,
    Ramana.

  • Changes are not reflecting in page

    Hi All,
    Thanks in Advance.
    I extend 2 controllers which has same functionality.
    My First controller is working fine but where as secound is not working, the changes are not reflecting in that.
    Any idea, please help me.
    Thanks
    Zaheer

    hi
    take the apache bounce aftere changes in in CO
    thanx
    Pratap

  • Changes are not reflecting in Int Directory. Pls suggest

    Hi All,
    I made changes in my Integration Directory.
    I run the scenario. Changes are not reflected in sxmb_moni.
    I do SXI_cache, CPA Cache and then again run scenario.
    Changes are reflected.
    What steps to do so that I do not have to do SXI_cache, CPA Cache again to get my changes reflected.
    Regards

    Hi,
    I have done the post installtion steps.
    My XI was working fine initially
    But yesterday it stopped working properly.
    My ID changes were not reflecting.
    Then I did SXI_cache, CPA Cache.
    Then my ID changes again started working properly.
    Since my scenario has to go in production:
    Pls tell me what steps to do so that
    I do not get this SXI_cache, CPA Cache problem again.
    Regards

Maybe you are looking for

  • Unable to Choose Photos to Share with Apple TV

    I am trying to "Choose Photos to Share with Apple TV" within iTunes. However, I get the following error message Photos folder syncing has been disabled for the Apple TV "" because the folder "(Unknown)" cannot be found. Any help would be apprecited.

  • The Dreaded 'Disk Wasn't Ejected Properly' Error Message

    Hi, brand new machine - hooked up an external USB 3 drive and switched Time Machine on. When the computer sleeps, it awakes to 'Disk Wasn't Ejected Properly' error message. Apple Support weren't much support, they had NO fix. Any ideas?

  • Usage of Transaction IView in WPC

    Hi Experts, Can we use the Transaction IView in WPC(WEBPAGE COMPOSER 7.0) ? Thanks in advance Suresh

  • Does Mail have template for email newsletter?

    I see that Mail has templates for cool emails, but is there a way to have an newsletter template that you can just fill in, has columns, etc., and then you just Send it out to your recipients? Does Pages have this feature? Thanks.

  • Workflow photoshop cs3 on mac with nikon d200/300 camera

    I already asked this question at the mac forum in here ...it dealed with the problem that i have noisy pictures anyway after having changed to ps cs3 under mac.Istill make the pictures with my nikon d200/300 camera and i have not chosen any higher is