Changes are not updated from ECC to CRM How to debug

Hi,
QCs 1140049726 and 1140047459 were updated in P20 system to remove the WBS. This was done per normal P20 process and instructions. P20 system correctly reflects that QCs have no WBS value and the contracts are BOX - all is correct in P20.
CSP still shows these QCs as having a WBS assigned to them. This is incorrect. It has been over 24 hours since the P20 QCs were changed to reflect no WBS, but CSP still has not been replicated with the correct data.
How to proceed with it. How to debug from ECC to CRM.
Prem.

Hello Prem,
Could you please have a look at SAP note 656823?
This note contains debug tips for btx data transfer. Please check point 6 which talks about the delta download.
Hope this could be helpful.
Best regards,
Maggie

Similar Messages

My contacts are not updating from the iCloud. How can I actively go and retrieve them?

My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?

Hello there, Lk354.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
Get help using iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Material Updates from ECC to CRM

Hi Experts,
We recently had application of Enhancement Pack4 on our ECC system. After the application EHP4 pack, we have started getting some material updates from ECC to CRM. And those updates are failing in CRM as we do not have any material set up in CRM. Due to these failed updates, lot of dumps are getting created in CRM. So can u please advice where/how in ECC i can restrict these updates to go to CRM. Any help in this will be highly appreciable.
Regards
Charitha

Hello Charitha,
In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
for your RFC destination (ECC).
This would prevent any automatic data flow for this object from R/3 to CRM.
Hope this helps!
Best Regards,
Shanthala Kudva.

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

Limit PO price changes are not replicated to ECC backend

Hi all,
SRM 5.0 ECS SP13.
When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the field "VALUE" and "EXPECTED VALUE" have the changed/new value.
Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
Can someone throw some pointers how to resolve the above issue.
Thanks in advance.

Hi
can you recreate the same issue
are you saying that
1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
or
1. limit sc
2. Limit PO
3. update not reached ECC.
Note 1284361 - Limits not transferred to backend purchase order
Symptom
Extended classic scenario.
You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

After transport, changes are not updating

hi..........
We are configured two clients as master client(009) and test client(008) in one DEV machine.
i performed one transport from 009 to 008.( i released through scc1 and imported in 008 through scc1) it's transported successfully.
but our consultant saying that, those changes is not updating in client 008.
i performed so many transports to 008 and also to prd. before and after.
then why the changes were not updating in 008, to that particular request?he created another request with the same issue and i transported it.again same problem. is there any thing to check from basis side?
(4.7E,mssql,widows 2003 server)
Please help me.................

Hello,
Check the transport log. Even it is saying Sucessfully Imported, just open it, read it.
And check the size of the transport request also.
And another option is add this particular request with another request and transport it. Check for anything is happening....
I don't think anything balance has left from basis side....
Note: Points always encourage me to reply !!

Changes are not updating :(

Hi-
For the past few days, after I save changes (and these are simple text changes) they are not showing up on my webpage. The upload seems to be a little slow lately, but I'm not getting any error messages......it says it has uploaded. But....my changes are not there
Is anyone else experiencing this??? Any advice???
Thanks!

yes, empty your cache as kabing said!
a cache saves files from your website when you visit it often - therefore it loads faster. yet when you make changes to your website - they are then not recongnized and the old page is still showing!
so my advice, empty your cache everytime you publish!
max

Signed DocuSign documents are not updating in Microsoft Dynamics CRM record

My organization uses DocuSign with our Microsoft Dynamics CRM Online instance.
When we first applied the DocuSign solution, we could send documents using the Send with Docusign feature and a signed version would be automatically up[dated in the same CRM record when the process was complete.
Recently, the signed copies are not updating in the CRM.

We don't know. Better to ask over here.
https://community.dynamics.com/crm/f/117.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Bid invitation changes are not updating

hi
when im creating a bid invitation and publishing the bid ,and when im changing the partner ie requester
and it publishing the same bid invitation its showing the same partner ie the prevoius requester
please help to solve this problem

Hi ,
Actually we cloned standard bid process (bus2200) to PP process and when we r working with
standard bid process with stragic purchaser role and making changes to published bid , the changes r updating but in pp proceess the changes r not updating
pls help me i will be thankfull to u
Edited by: eswar syam on Jan 14, 2009 10:05 AM

Remote Function Module call from ECC to CRM (how to pass parameters?)

Hi there,
I have a remote FM that I would like to call from ECC to CRM. The FM is remote-enabled, so I assume that I can call this from CRM. However, in CRM some of the table structures that is required are not available. Hence, my export/import parameters won't be match, unless I create those types in CRM, but this is going to major work!!
How do we pass/import the parameters since the data type in ECC is vastly different/not available in CRM?
Cheers

The structure will need to be defined in CRM.

System Status Vs User Status updates from ECC to CRM

Hi Frnds,
    Am facing a problem in Status Management , We have ECC as Backend , When ever we save the order in CRM it is Relicated to ECC thrgh CRM Middleware.
   (I) I have created User Status 'Z' Status Profile in CRM and Assigned that Profile to Status Triggering Business Transaction and to the Transaction Type.
          I have assigned this Status to INProcess and Released , with my 'Z' Status.
I have Maintained the Same User Status Profile in ECC also.
My questions are
1) How can i Maintain the System Status with User Status in ECC (For example in CRM we maintain thrgh Business Transaction ,last field in Status Profile.) ?
2)When ever i change the status in ECC that Status as to be update in the CRM?
        But here Order in CRM is not updated , For example , if i change the status to "COMPLETED" in ECC ,the Status "COMPLETED" is not triggered in CRM.
        Here i need write a BadI or is there any Config settings that i need to Mainatain ??? or anything different approach ??
   Helpful Answer will be Rewarded with Points .
Thanks in Advance
Reagards
Ram

Hello Charitha,
In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
for your RFC destination (ECC).
This would prevent any automatic data flow for this object from R/3 to CRM.
Hope this helps!
Best Regards,
Shanthala Kudva.

My website changes are not updated in my folder

I make changes to my website in IWeb, and when I save it to my folder, it is not updating. Nothing happens. I cannot figure out how to get it to properly save the new changes so I can update the actual website.
Please help.
Thanks

When you publish to a local folder, are you testing the site by double clicking the index.html file to launch it in the browser?
Make sure you empty the browser cache, hit the refresh button or add a ? to the end of the URL to get the latest version.

Delta data changes are not reflecting from ODS to another infocube

ODS1 --->Infocube1 - Field1,field2,field3
ODS2 -
> Infocube 2 -
Field 2-1,2-2,2-3,field2-4
Both datasource information are totally different.
Delta changes are captured in the field3 in ODS1 and Infocube 1 also.
Field3 and Field 2-3 is the same field .Infocube 2 - I have included infoobject and populating the value from ODS1-Field3.
The question is
Whenever I capture the changes from ODS1-field3 -the similar changes also needs to be updated here in infocube2 -field2- 3.
Start routine : I have created code like ,
SELECT field1 field2 field3
INTO CORRESPONDING FIELDS OF TABLE IT_field
FROM /BIC/aods1.
Update rule routine : Select the field2-3 in the characteristic- routine
READ TABLE IT_field INTO LS_field
WITH TABLE KEY
field1 = COMM_STRUCTURE-field2-1
Field 2 = COMM_STRUCTURE-field2-2.
Result = LS_field -field2-3.
If I load the full load to infocube 2 -no problem.
Is their any other way Can I capture the transactional data changes in infocube 2.
Advance thanks

Thanks for quick update. You are right.
There is no problem from ODS1 --->Infocube1 - Delta is working properly.
My question is ,
ODS1 has a field 3. Whenever new changes happen for this field3 - I have to capture the simialr changes in the Infocube 2 and the fieldis 2-3.
field3 and field 2-3 is the same field infoobject .
Whenever the changes occurs inthe tranasation - ODS1-field 3 will capture the changes. How can I capture the similar changes in Infocube 2 and the field 2-3.

Products are not migrating from R3 to CRM

Hi,
We have created a new products in R3.
those products are not migrating to CRM .
What could be the reason.
Points will be rewarded.
thanks

Hi
Could you plz help me the process you are following to donwload products from R/3 to CRM.
Kinldy note ..few things:
1.Middleware set up to be done.
2.Taxes to be mapped correctly for products.
3.did you download the DNL_CUST_PROD0...if you are using product hierarchy did u download..DNL_CUST_PROD1,DNL_CUST_PROD3
4.What is the error message you are getting in SWM01 for the BDOC type PROD
UCT_MAT?
if you have downlaoded these cutomizing objects...then use initial donwload (R3as) with object name "MATERIAL" ..these will bring all products from R/3..You can also use filters to do a selective download.
Kindly provide these details..
Regards
Sayantan

Changes are not updating in infotype 588

Hi,
In 0001 subtype of infotype 0588 , when i try to copy the record into another or change the record,
i am changing the ESI Number ,but this new number is not updating. It is updating with same old number.
What may be the problem?
This problem is coming when i try to create the new record by copying the existing one.
If i create new record normally then it is working fine.
Thanks,
Mamatha

hi,
I am not copying the infotype. I am copying the record of 588 infotype to create the new one.
thanks and regards
mamatha

Changes are not updated from ECC to CRM How to debug

Similar Messages

Maybe you are looking for