Changes documents for BOM and Routing

How Can I find the change documents for a BOM and routing?

Change Documents For BOM
CS80 - Material BOM
CV80 - Document Structure
IB80 - Equipment BOM
IB81 - Functional Location BOM
CS81 - Standard BOM
CS82 - Order BOM
CS83 - WBS BOM
Change Documents for Routings
CA60 - Task List Changes
CA61 - Routing
CA62 - Reference Operation Set
CA63 - Rate Routing
CA64 - Reference Rate Routing
Hope the above may help you.

Similar Messages

  • Looking for BOM and Routing objects created with a BAPI

    (I ran this one up the flagpole in the data forum and didn't get any responses.  Maybe someone here has see this phenomon?)
    I'm invoking BAPI_MATERIAL_BOM_GROUP_CREATE from an external Java program. I believe my code matches the example I find here and in the SAP documentation (transaction BAPI). When it finishes, I get a successful return (type=I, number=000), and a message of "BOMGroup 00000070/TAM1/1 has been created. External reference:" But I can't find anything back on the SAPGUI - the material number still says it has no BOM (on CS02); I don't see any new BOM Groups (on CS06). By the way, the "00000070" number seems to be assigned by SAP: I t increments each time I run my test, so I must be doing something; the TAM1 in that message is the plant, and the "1" is the BOM Usage I assign in my BAPI (both in the BOMGroup structure and the MATERIALRELATIONS structure). I do a commit transaction at the end too, although the BAPI to create the material created it without me doing a commit, so I don't think that was necessary.
    (Update since I posted this on the other forum:  I tried to create a routing and have the same result - 000 message number, and a message including an SAP-assigned number, making me think I've created an object, but I don't see it anywhere.  Any idea which tables I can look at to find them, and maybe see what's missing (e.g., with SE12 or some such)?)
    Any thoughts on what I AM creating? Or some little thing I'm missing here?
    Thanks for any insight!
    Thomas.

    check the post:
    BOM and Routing with Dependencies
    -Murugesh AS

  • View change documents for risks and functions

    Is there a way to see what changes have been made to risks and/or functions?  Our SOX group would like to monitor the changes that have been made, who they've been made by and when.  Currently we can go into the individual functions and risks and look at the "Change History" but not sure if there was a way to see a massive list?  Possibly a table that we can pull?
    Thanks for any help!
    Elizabeth

    Hello Elisabeth,
    unfortunately in 5.2, you will have to go to the individual functions.
    5.3 will have a one-click overview for risk/function changes, as well as configuration changes.
    Frank.

  • How to see BOM and Routing changes

    Hi,
          Can anyone help me in finding the changes made in BOM and Routing

    Hi,
    why open two thread for same question in this forum, pls close any one
    Routing changes: CA60
    BOM changes : CS80
    or
    Goto CS03, enter Material, Plant and Bom Usage.
    Goto Alternate Overview of BOM.
    Select the BOM.
    In the Menu Bar, Click Environment -> Change documents.
    Regards,
    Sankaran
    Regards,
    Sankaran

  • Production Order for a material without BOM and Routing

    Is it possible to create a production order for a given material without routing and BOM, I know we can
    create a production order for a material without a BOM (with a default routing) just wanted to check with
    the above criteria
    Thanks in Advance!!

    Members:
    Thank you for your valuable replies and time
    Santosh:
    Tried what you have mentioned, but system still picks up a default routing
    Kaushik:
    Maintained Default values in OPJG for the given order type, but system still picks up
    default routing
    Mangalraj:
    have no issue in creating a production order without a BOM, but I am trying to see
    is there a way where I can create a production order without a BOM and routing (not
    even default operation )
    Any suggestions on how to create a production order for a material without a BOM
    and routing (not even default one )

  • Export and import change document for user master data

    Dear Gurus,
    I have two queries on change document for user master data:
    1. Are there any approaches to export and import change document for user master data?
    We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
    2. Change document for Role change in QAS
    When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
    Could you advise this is by SAP design or are there any approaches to record this transported role change  in the role change document in QAS?
    Thanks
    YBY

    1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
    2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
    Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
    Cheers,
    Julius

  • How BOM and routing is selected for Planned order and Production order?

    Hi,
    Can any1 plz tell me how BOM and routing is selected for a planned order and production order. ?

    Hello Mathisuthan,
    BOM and Routing selection for the planned order and production order through production version, If u have more than one BOM and more than one Routing then u can maintain this information as Production Version in the system.
    Production version you maintained
    MM01/MM02 -- MRP4--- Production version
    Or you can create Production Versions in Mass also with Transaction Code "C223"
    In the case no production version maintained/created  for the material, then system by default  will pick the first BOM and routing.
    I hope this information helpful to you.
    Regards
    Umesh Mali

  • Production order for alternate BOM and Routing

    Hi All,
             In my business(Discrete) scenario I have alternate bom and routing has group counters. some times i should use first BOM and First group counter. Then next Bom and next group counter. But lotsize is same( prodcution version how to assign).
    When creating production order i should select which ever i need.
    Regards,
    S.Suresh.

    >          In my business(Discrete) scenario I have alternate bom and routing has group counters. some times i should use first BOM and First group counter. Then next Bom and next group counter. But lotsize is same( prodcution version how to assign).
    >
    >  When creating production order i should select which ever i need.
    >
    Hi,
    For your requirement you can define your Order Type Dependent parameters OPL8 as:
    Production Version : 1 Manual Selection of production Version.
    In this case every time when you creat your Production order System will ask for the Production version to be selected. You need to select the PV manually then only you can proceed further.
    This setting is applicable only when the Production Order is Created.
    It will not effect the Planned Oredr creation via. MRP Run..
    Hope this helps..
    Regards,
    Siva

  • Change Documents for RAR

    We use RAR 5.3 SP 14 and were wondering if there were any tables or reports that can show the change history upon mitigation added to a user.  We can see the date that the mitigation was assigned to a user, but we can't seem to find the date when a mitigation was removed from a user.
    For those that are questioning, we do use CUP for mitigations too, but we are mainly trying to find the change documents for RAR.
    Thank you in advance.

    SAP Answered
    "In 5.3, there is no change log for mitigation control assignment. The only option in 5.3 is if you configure the Workflow option for Mitigation, then a request would have been routed through CUP for
    this change and then you could search in CUP for the history of the change. Specifically, under RAR in Configuration - Workflow - Mitigation, if this parameter is set to YES, anytime you would
    add, remove or change a mitigation for a user, a workflow item would be sent through to CUP for approval before the change is actually posted.
    However, if you don't have this configured, there is no change log of mitigation changes.
    There is no change log table in RAR to track mitigation changes, sorry. The change log information is not retained in RAR for changes to mitigations. The only "change log" information in RAR is for
    Configuration and rules. This data is stored in table VIRSA_CC_CDHDR and VIRSA_CC_CDPOS. Again, this is only for changes to configuration and changes to rules. This is the only data that RAR tracks
    changes for.
    Changes to mitigations are NOT stored anywhere in RAR. Please let me know if there is any concern."

  • Updating BOM and Routing

    Hi
    I have requirement  to update BOM and Routing . Please suggest me BAPI or functional module  to Update BOM and Routing .
    Thanks
    Uday

    Dear Shankar,
    For BOM use the T Codes CS20 or else CEWB for making mass changes or else check with this Functional Module,
    CS_CL_P_BOM_MASS_CHANGE 
    For routing use the T Code CEWB or else check with these Functional Modules,
    CP_CL_S_OPR_MASS_CHANGE 
    CP_CL_S_TSK_MASS_CHANGE 
    EWB_MASS_CALL_OPR       
    EWB_MASS_SAVE_OPR       
    EWB_MASS_SELECT_OPR     
    Regards
    Mangalraj.S

  • Bom and Routing

    Dear Gurus,
                   For a oil refinery wht will be the  BOM and Routing.Input is crude and out put is 32 FGs at differnt level.The routing seems to be complex and how to structure the BOM ?How the product costing is done in refinery? Any body have implmented in refinery?Please share your experiance.
    Regards
    Guna

    Hi, Guna R
    Same industries we are going to implement sap PP-PI module , can you share some document, they are consumed Crude oil (Raw) and finally produced Refined Soya oil , in between that produced some By-product ,So how can we map process in sap and how the costing will done,
    What will be the Recipe  ,
    What will be the  Resources
    What will be Activity for costing
    If you have any document 
    please share on my mail ID [email protected] 

  • Planned order not selecting BOM and Routing.

    Dear All,
    I am runing LTP, but for all simulative Planned order system is not selecting Routing and BOM.When i change it manually its selecting the correct BOM and Routing.
    Please let me know what needed ....
    Regards
    Sathish

    Dear,
    First check the OPU5 setting for routing selection ID for your pant and order type?
    Check setting of OPJM fo the selection ID linked application?
    OS32 setting for alternative selection.
    BOM is selected by the system based on the setting in MRP plant parameters(OPPQ) and in material master MRP view BOM explosion type. I. e based on the validity date, lot size. so on
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Apr 3, 2010 11:11 AM

  • Table to look for change documents for users

    Hi friends,
    Is there any standard table to look for change documents for a user?change document through SUIM does not give the correct log.
    Thanks for you support.

    Julius
    Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
    I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
    Regards
    Colleen

  • Configuration documents for Training and event management &apprisals?

    hello xperts
    can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

    Thanks for your suggestions.
    i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS.  appraisal has to done in the ECC only.
    Done the customization like this :
    created scales
    created appraisal model and assign the scales
    for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
    Now Appraiser (Manager) from APPCHANGE complete the appraisal.
    now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
    how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
    Please help in this requirement.
    Thanks and Best Regards,
    Praneeth kumar

  • Creation of Change document for HR Assignemnt Infotype in Transaction- CR02

    Hi,
       I have to create change document for HR Assignment in Transaction CR02.
    I have gone thru the documentation available in SAP help.
    Please help me if anybody has worked on it.
    Thanks & Regards,
    Alok.

    Hi Raja,
    I didn't quite understand what you mean by creating/changing data using transaction codes, because within SAP MDM 3.0 you are in a portal environnment and don't work with transaction codes.
    General remark: Information on the up-to-date MDM 5.5 is provided in the Service Marketplace. For an overview of MDM 5.5, see also http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/mdm/capabilities provided with sap mdm 5.5.pdf.
    Kind regards, Markus

Maybe you are looking for