Changes don't arrive in FCP

Hi all,
FCP Studio 2, Latest updates as of 11/27
This is one of those frustrating things that make me yell at the manual "You Lie!!"
* I right click a clip in FCP and select Send To: Soundtrack Pro Audio Project File
* Give it a proper name. Create the file as recommended by the manual (markers set)
* Make the changes in Soundtrack. Lets say something obvious like soak it with Reverb.
* Now, the manual says I just have to save the Soundtrack Project and VOILA! The changes are now there in FCP
* Only - this just doesn't seem to be true. There are NO changes in FCP to the audio at all. It sounds exactly the same as it did before I sent it to SoundTrack.
What's the completely obvious and stupid thing I'm missing here?
Thanks!

Two things . . . maybe. First, don't rename the sent clip. At least for now. This will help figure out where things are going wrong. Second, when you're doing your save, you should simply do a "save", not a "save as" or "save project as". When you do, you should be prompted with another winodw asking if you want to "include the source audio", or "reference it". I prefer to choose "include source audio". Once it finished writing the file (to the "sent" file, not a project) when you go back to FCP the audio clip will include "(sent)" next to the name.
Hope this helps.

Similar Messages

I send an e-mail every week with an attachment to 4 people since I got Firefox they don't arrive at their destination. Any ideas?

I used Internet explorer but was having difficulties reading "sky's" e-mails, I was recommended by Sky to use Firefox. I can now read the e-mails but when I send an e-mail and an attachment, to 4 addressees (which I have done every week for about 5 years, using internet explorer) they don't arrive at any of the intended destination, can anyone give me a solution to my problem. Thanks

Hi thanks for the response,
I haven't tried to send an attachment to myself, not sure exactly how to do that but I'll have a look Friday/Saturday when I get home.
As to the mail system, I use Sky's e-mail, as I said it use to work perfect on Internet explorer until Sky changed the format of their e-mail page, then I was unable to scroll up or down the page. So I was advised by Sky to use Firefox

How to track Changes done in planning book....by whom.....in DP planning

Hi All,
I want to track the changes done in Key figures in planning book ..........mostly by whom .......let me know how to track the same in APO DP planning book...........any std..........way..........like R/3...........pl reply.............your expert guidence will be appreciated..........by rewarding the same..............Thanks...........
Best Regards
Sharad

Hi,
You would be able to tackle this partially by adding a new hidden key figure.
Refer the example below;
Kfig1. Stat forecast: Calculated using stat forecasting
Kfig2. Adjusted forecast: user normally changes this
Kfig3. Hidden copy of Adjusted forecast:
Using macros copy 1st snap shot of stat forecast to Adjusted and Hidden. once adjustments are done, use Macro to compare Adjustments and Hidden copy of original values, or this can be a overnight batch job to generate alerts
Hope this helps.
Pradeep

Sending pdf as an attachment in email with all changes done on the pdf

Hello Everyone,
I have developed a webdynpro java application which sends a interactive form as an attachment in an email. Everything works fine except that there are some editable fields on the form and the changes dont go in the attachment. The Send Email button is on the webdynpro View. I tried many different things but nothing worked. Somehow the changes done on the form dont get saved in the pdfSource when a button on the webdynpro view is clicked. Any help would be very much appreciated.
Thanks,
Saika.

Hi Hari,
check this link: http://help.sap.com/saphelp_nw70/helpdata/en/51/d5cd16235e4643ae8ec92395c4ad97/frameset.htm
Also search on SDN, you will get many thread links with same question
ABAP Proxy Attachment
Regards,
Praveen Gujjeti

Changes done in options are not effected - not able to change home page

When I do changes in the tools-options menu the same is not effected in the next re-start of firefox. For example if I change my home page to a new web page, the same is not opening in the next restart of firefox. Not only this any change done in the options menu is not effected

See:
* http://kb.mozillazine.org/Preferences_not_saved
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols

How to find the recent changes done in the workflow by user id ?

Hello all,
How to find the recent changes done in the workflow by user id ?
I have made changed in Production system .
Like changing the status ,
changing the agent ,
but for these it will , not ask for any request .
So i want to know is there any method to find what are the changes done by me ?
Thanks and regards
Prem

Hi,
This is caused by mandant settings in scc4. It's better not to make changes in PRD, because then your DEV en QA systems differ.
Kind regards, Rob Dielemans

Authorization For :Monitoring Changes done by User .

I am not abe to monitor changes done by user in Delivery as well as billing so kindly suggest.
For Billing:I went to environment-->Changes:Getting msg:Authorization Object s_scd0_all not assigned.
For Delivery:Changes field apears Grey Even if changes are done.
Edited by: Pritesh kumar on Apr 30, 2010 9:15 AM
Edited by: Pritesh kumar on Apr 30, 2010 9:15 AM

Hi pritesh,
For this you need to co ordinate with ur Basis Team. First you need assign this Authorization Object with respective Field and Values to ur respective SD Role which is assigned to your User Id by using T.Code PFCG
To Check Role Go To SU01- User ID Tab Role here u need to check the roles.
Delivery Changes T.Code: VL22
Invoice Changes : Environment - Changes
Object Field Value (interval)
S_SCD0 ACTVT 08
Regards
Durga Sana

How to revert the changes done in an ABAP query

hi experts,
how to revert the changes done in an ABAP query.
I renamed a field in ABAP Query in development system, but the output list now has overlapping fields.
the renamed field is getting overlaped with other fields, also one more field has overlapped.
now the problem is how to get back to the previous version of the query so that the overlapping fields can be corrected.
renaming one field has led to the problem of overlapping fields in the output.
the sequence of the fields has also been affected.
Please help

Hi,
Goto Utilities-> versions-> version management.
It will show you list of previous TR's. Just click on the version which you want to retrieve and click on Retrieve button on the top.
Your program will be retrieved to your previous version before change.
Hope this will help.
Regards,
Aravind.

Log for changes done before posting LIV in Tcode MIRO

Hi
By default data will be fetched from PO/GR for LIV however our users are changing few details such as payment terms, tax code, vendor code, vendor invoice amount etc., before posting LIV in tcode MIRO. We don't have any log for these changes done by our users.
We want to know what are fields which have been changed by our users at the time of doing LIV (i.e. before posting LIV).
Can any one help us in this regard.
Regards
P Karthikeyan

If you know those fields, you can find the differences for those field in table EKKO and EKPO for PO, the similar value will be available for IR in table RBKP and RSEG.
Like as payment term, The payment term is saved in table RBKP - ZTERM for MIRO.
The same will be available in table EKKO - ZTERM for PO.
If the value for both fields are same, then user has not changed the field at the time of MIRO.
If the value mismatched, then user has changes the value in MIRO.
In this way, you can find the differences for other fields.

Changes done for sap user details

Hi All,
I need to know a standard transaction code or FM;
which can give the information on the modifications/changes done
for the sap user's first name; last name and e-mail id.
Any help will be appreciated.
Thanking you all in advance.

Hi Kanagaraja,
I really appreciate you inputs, it will definitely have entries posted by BAPI.
But the requirement I have is little different.
I will have some person changing the user information manually,
I need to go somewhere and find out whether the person has made the
changes in user's first name, last name or e-mail id.
So, I am looking out for some FM or table or even standard t-code where
I could find the changes done, and change log lately.
Thanks and Best Regards

Changes done in ECC 6.0 from 4.6C

Hi All,
Greetings!
I would like to know the changes done in the SAP-HCM system or things added in the version ECC6.0 of that compared to 4.6C as I need to analyze the system changes as i have to do an upgrade scenario later for my client.Kindly help me.
Also i am not able to find any release notes for ECC 6.0 as well.
If at all anyone has details pertaining to my query would be of great help.
Thanks in advance.
Regards,
Sanjay

Hi
Refer the links
http://service.sap.com/instguides.
https://wiki.sdn.sap.com/wiki/display/HOME/ERP2005+Upgrade
http://solutionbrowser.erp.sap.fmpmedia.com/
http://solutionbrowser.erp.sap.fmpmedia.com/
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
Look at the Below SAP link to know about the Unicode programming
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/content.htm
http://service.sap.com/unicode
http://service.sap.com/unicode@SAP
http://service.sap.com/i18n
https://www.sdn.sap.com/irj/sdn/collaboration
Re: Unicode
https://wiki.sdn.sap.com/wiki/display/HOME/ERP2005+Upgrade
ABAP Differences 4.6c - ECC 6.0
/thread/328875 [original link is broken]
http://www.sap-img.com/basis/sap-upgrade.htm
http://searchsap.techtarget.com/loginMembersOnly/1,289498,sid21_gci1279911,00.html?NextURL=http%3A//searchsap.techtarget.com/expert/KnowledgebaseAnswer/0%2C289625%2Csid21_gci1279911%2C00.html
http://searchsap.techtarget.com/loginMembersOnly/1,289498,sid21_gci1279959,00.html?NextURL=http%3A//searchsap.techtarget.com/expert/KnowledgebaseAnswer/0%2C289625%2Csid21_gci1279959%2C00.html
http://sap.ittoolbox.com/groups/technical-functional/sap-hr/sap-payroll-upgrade-from-46c-to-mysap-2005-1456836
Technical questions on upgrade from 4.6 ro ECC 6.0
Re: PLM - ecc 6.0 upgrade from 4.6c
http://sap.ittoolbox.com/groups/technical-functional/sap-hr/sap-payroll-upgrade-from-46c-to-mysap-2005-1456836
https://websmp108.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=ADM326&COUNTRY=BE

Display changes done for reservation

Hi Guys
I have client requirement as below
They need to view changes done for reservation
Can any boy help on this
Thanks in Advance
SAP MM

Dear,
We have this requirement and we raised OSS to SAP also on this.
Reservation changes cannot be tracked in SAP system due to least importance it has. One work around through ABAP development but its not supported by SAP due to abnormal increase in data volume of change recording in data base which impacts system performance.
For this we, go with authorization matrix by which remove MB22 authorizations from all users and make one super user like concept. Means one plant only one user has authorizations for MB22 for which he can change the reservation. He get instructions whenever any user want to change reservation - must shoot a mail to all concerning inventory team before he changing with MB22.
Regards,
Syed Hussain.

Storing changes done to a selection view of a LDB in a TR

Hi Friends,
I do have a problem while storing the changes done to a LDB selection view in a TR. Please guide me on the same, below is the summary of changes done.
The requirement is as below:
Modified the STD LDB DDF's selection view.
Existing: Payment terms (ZTERM) taken from KNB1.
Required: Payment terms (ZTERM) to be taken from BSID.
So the changes we did are as follows:
Go to SE36>DDF>Extras>Selection views>Copy origin of view SAP to CUS and click on change.
Here we removed the input criteria for KNB1-ZTERM and added BSID-ZTERM as an input field. There was no TR prompted.
Please let us know how to get these changes stored in a TR.
We have also tried adding the below object in a TR# manually, but of no use.
R3TR DSEL SAPDDFSTANDARD
Regards,
Narendra.
P.S. : This results in changing the dynamic selections of FBL5N.

Hi Srinivas,
Can you elaborate on your answers...as I have already created CUS (origin of view - a copy of SAP) it is not allowing me to create one more origin of view... can you tell me how to create another origin of view apart from CUS, so that I can start these changes afresh...
Also in SE03 even If i give DSEL and SAPDDFSTANDARD it is not displaying any objects and prompting to give a valid name...
Regards,
Narendra.

How to know what are the db changes done today

Is there any way to know the Code changes done today in a schema. Code changes means any ddl commands / function changes / procedure changes / triggers etc. .
Edited by: DIVI on May 29, 2012 10:08 PM

Hi,
If you are need of the DB Changes for which a DB Objects are Created then,
you can use.
SELECT *
FROM USER_OBJECTS
WHERE OBJECT_TYPE IN ('TABLE', 'PROCEDURE', 'PACKAGE', 'FUNCTION');But, If You need to Track Entire DDL Activites, You have to Audit the Database Changes or
with the Use of Database Triggers.
Thanks,
Shankar.

How to see any changes done in BOM through Engineering change management?

Dear experts,
My client need to verify the revision of some assemblies in BOM through ECM.
I tried to verify it by taking some change numbers & executing it in CC03. I am getting the history date & name of person who done the changes. But can not able to see the actual changes.
Could you please tell me how to see the changes done?
Thanks in advance for cooperation & support.
Regards,
Mehul Veni

Dear Mehul Veni,
Assuming you have created a change number through CC01 and made changes in CS02 for a particular BOM by entering this
change number in the input screen in CS02.
Once after making BOM changes,save the data and check in CC03>enter the same change number>menu->environment-
>reporting->Bill of material--->select the change number and click on expand sub-tree and you will get all the required details.
Check and revert
Regards
Mangalraj.S

Changes don't arrive in FCP

Similar Messages

Maybe you are looking for