Changes done in oscolfile.txt are not picked up by CCMS agent

Hi Ppl,
I want to monitor one File System at OS level in monitores system using Alert Monitoring in CEN.
I made an entry in OsColFile.txt , also the exact path of OsColFile.txt file is maintained in sapccmsr.ini.
Even then i cant see the MTE corresponding to that FIle System under Monitoring tree.
I have restrarted the CCMS agent couple of times, also restarted the agent's memory segment in "warm up state" couple of times, but to avail nothing.
Kindly suggest what else i can do.
Thanks

Hi,
Problem has been resolved.
It was human error only, directory was made into oscolfile, rather it should be of filesystem.
Thanks all.

Similar Messages

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?

I'm using Adobe Proto on an iPad. I created one page and successfully viewed it in the Creative Cloud. Then I duplicated that 1st page so I could work on the next page in that project. I made some changes to the 2nd page and then synced the project with the Creative Cloud again.
Once I try to view the 2nd page in the Creative Cloud, it's still an exact copy of the 1st page. In other words, my changes on the 2nd page don't show up. I've tried synching the project many times and I get the same result. Tried opening the project from another browser, same result.
My changes to a duplicated page are not syncing up in the Creative Cloud. How can I fix this?
Thank you.

Yes, I'm 99% certain the project is being synced. If I duplicate more than the one page so that I end up with more than 2 pages, I still see every single page that I duplicated and made changes as the initial version of the page.
I duplicated that 1st page again so that I have 3 pages. I made changes to the 3rd one and I'm still not seeing those changes when I look at the page in Creative Cloud. I see the new, 3rd page, so that should mean the project is being synced, correct?

Email changes on iPad via IMAP are not updating on Exchange Server

I have set up IMAP access to my company email from the iPad. Reason being so that I can manage emails (delete, move to folders etc) whilst working off-line.
Seemed to work fine for a day or so but now any changes made via the iPad are not syncing and updating the Exchange Server once back on-line.
Any hints?

I see. okay, well, on my iphone with iOS 3.x I always saw similar issues. I had email on 2 Exchange servers, so one of the accounts had to be IMAP, and it never worked properly.
Yes, it would mark emails as being read, etc, but anytime I moved or deleted an email, it would do so, but would also keep a copy on the original mailbox it was in. Basically the IMAP "Expunge" command wasn't properly being sent by the iPhone
I submitted this as a bug to Apple via bugreporter.apple.com and they confirmed it. Whether it's fixed or not in iOS 4 I don't know as iOS 4 has the ability to use multiple Exchange accounts so I no longer need the IMAP.

Smartview webf run time prompts upon submit are not picking up from the POV

Hi ,
I am in Planning 11.1.2.1 and using Smartview 11.1.2.1.103. After connecting to Planning Webform from Smartview, i am saving a composite form which should launch a Business Rule with run time prompts attached to the webform upon submit. The business rules are running with default run time prompts and it is not picking up the members from the POV ... is there a way to make it pick up the members from POV into the run time prompts upon saving it ? so far the workaround is to initiate the business rule from the planning tab in smartview .. any thoughts on this ? cheers

I found a known issue for smart view in 11.1.2.1 read me doc
11075506
When you open a data form in Smart View, if a business rule is directly attached to a composite data form that is set to Use Members on Data Form and Hide Prompt, the runtime prompt values are not picked up. Instead, the Runtime Prompt dialog box is displayed, and the user is prompted to enter a value.
Good Luck

TLB order are not picking all PO in APO

Hi Expert,
TLB order are not picking PO in APO.Order has missing PO.
for ex :
Ord 1 ; 10 lines with 20 qty of PO
Ord 2 : 5 lines with 20 qty of PO (here lines should be 10 instead of 5)
I appreciate your immediate response
Thanks
Vijay Job

Hi
I found the mistake. The address ( shift F5 ) in OX10 does not get transported in transport request , thought the plant gets copied from eg. client 100 to client 200.
So I manually entered the address for the target client eg 200 here, and then the dropdown list now shows all plants.
Thanks
kamala

Excise value are not pick

hi experts
hi i have a problem while doing billing document against sales order and outbound delievery excise values are not pick by the system.but in the sales order it is showing . please help to resolve this issue ..

Dear Farhan,
Just take a help of an SD consultant it is a matter of 2 min for him to solve this issue.
still Go to tcode VTFL
and search for your delivery type and your billing type and double click on the same,
2.Then you will have an item folder on the left side click on that and you will get the list of all item category.
3. Double click your item category YP05 and on the right side lower end you will get the Price type - in that enter "D" instead of "G"
and Save it. then transport it to your quality and do the sales order process again.
REgards,
Sudhir

I hav ipad 2 and it is deactivated and now i m trying to it reactivated but it is not done error comes "we are not able to activate your ipad right now"..can anybody suggest what can i do for activation my ipad 2?

hav ipad 2 and it is deactivated and now i m trying to it reactivated but it is not done error comes "we are not able to activate your ipad right now"..can anybody suggest what can i do for activation my ipad 2?

Have you tried plugging your iPad to iTunes?

Anybody out there other than myself that has done OCS certifications and are NOT part of OPN?

Anybody out there (other than myself) that has done OCS certifications and are NOT part of OPN?
I had done a few of these just to get introduced to new concepts.
When there is both a OCE and an OCS certification for a subject, I strive to stick with the OCE.
What are people experiences?
Thanks Roger

I don't actually qualify for your first condition since my employer is an Oracle Partner. That said, I don't take OCS exams in order to gain gold stars for my employer.
OCS exams are the least technically-oriented of the certification types. They are aimed at salespeople and integrators that need to be able to talk about Oracle products and sound reasonably well-informed in doing so. The exams I've taken have all been much more focused towards the fact that a given feature exists and the functionality it has than with implementing said feature in the real world. That is not to say that the information you have to learn to pass OCS exams is not valuable. It's good to know what the capabilities of Oracle products are. I have been asked by my current and former employers about the advisability of incorporating feature 'X' into our solutions. Preparing for OCS-level exams can give you insight into how (or if) given capabilities of Oracle products can help (or not) in a given situation.
That said, OCP and OCE certifications are much more valuable when you actually want to learn how to make use of the various Oracle technologies.

You are not one of the possible agents of task 'WS20000081'

Hi,
I need to trigger the workflow WS20000081 using the service. This workflow gets triggered by 'Create Leave Request' service which is in ESS.
To test the above said workflow, I need to execute the service WS20000081 in R/3. But when I execute this service from Service User log-on, it throws an error as follows.
<b>You are not one of the possible agents of task 'WS20000081'.</b>
Even after I changed the task assigment as 'General Task', it keeps giving the same error.
Please suggest me how to solve this problem.
Regards,
jey

There are agents assigned for a task in the workflow.The same role has been assigned to my user id.But it does not work
I saw in Debug that it tries to execute the Method 'EXECUTE' in the Class CL_SWF_RUN_WORKFLOW_START..which checks for authorization internally.
I never know why this is failing.
I checked in another box which is upgraded to ECC .
There inside the Method Execute it takes a parameter m_task->properties-general = 'X'
and TCLASS = 'NO_CLASS'.These r passed to the authorization check which succeds there.
But in this system m_task->properties-general = ' ' and Tclass = ' '.
Can anyone pls suggest how to go abt this.

ESS- Leave : You are not one of the possible agent for the task ws9021212?

Hi ,
I have copied the standard workflow template wa12300111 and assigned the new template in the customizing. When i apply leave from ESS working time , it says an error " You are not one of the possible agent for the task ws9021212? " .
The similar kind of Error i have solved before in by making the workflow as GENERAL TASK in PFTC as follows.
PFTC -> Choose "Workflow Template" from the drop down -> Enter the workflow template id "ws9021212" in the text box -> now click on "change" button -> Now goto the menu addional data -> agent assignment -> maintain -> select the task text -> and set it as general task.
i have cleared the buffer also!
BUT STILL I AM GETTING THE ERROR ?
Please help me !
Richard A

hi Richard
Try to do this way. IN the workflow builder there is a button with hat. that is basic data. click on that and it will go to another screen and u can find a apple button that is agent assignment for a task click that.
It will open maintain agent assignment screen. click the text below that and click the attribute button and click the genral task. i think this will solve ur issue.
If helpful kindly reward points
Regards
vijay

Error: You are not one of the possible agents of task 'WS99900032'

Hi frnds,
I have copied the std leave request workflow WS12300111 into WS99900032 and assigned in the SPRO setting. The approvers are determined using the workflow rule (PFAC) and its not determined from Org Management. But when i tried to apply leave, its throwing me the error You are not one of the possible agents of task 'WS99900032'.
Can anyone give me solution to solve it?
thanks,
Suganya.

You are not one of the possible agents of task 'WS99900032'
You need to refresh the organizational environment and then execute the workitem
1. First make the workflow tempalte as General task and then
Goto PFTC ---> enter the workflow tempalte number by selecting workflow template ---> open in display mode and on menu Addtional Data ---> agent assignment ---> Maintian ---> select General task
2. Goto SBWP -
> Seetings -
>workflow settings -
> refresh ornozational environment and then try to execute the workitem

Unable send request, you are not one of the possible agents

Hi,
I am trying to configure workflow for leave request, for my requirement i have to do some modifications to stadard workflow(12300111), so i copied it and made configuration settings in spro also, but when i create a leave from PTARQ transaction
workflow is not getting created.
when i debugged it, i got amessage saying 1) unable send request 2) you are not one of the possible agents
Is there any other stting i have to do??
Thanks,
Krish.

Hi Kishore,
Please check below things.
1. In the SPRO, have you maintained your workflow Template against the required leave type.
2.Use CTRL + F2, and check is there any error in your workflow. Also check whether it is active or not.
3. Check the workflow agent assignment in Basic data. It should be General Task.
Thanks.

Changes made in Camer Raw are not visible in Bridge

I'm editing the RAW images in Camera raw started from Bridge (Ctr- R). By returning to Bridge with "done" the changes are not visible. This worked until recently.
s there any setting which prevents Bridge taking in consideration the info from the XMP file ?
Re-starting Camera Raw I can see the changes from the previous session ...
thanks in advance

I love these quick solutions also.

Foreign Currency Payments are not Picking up Exchnage Rates

Hi,
We are on R12.0.6 and while entering foreign currency payments the system is not picking up the exchange rate. It is only allowing us to enter USER exchange rate. The field of exchange rate on Payment form is greyed out and not showing anything.
We have checked the rates and these are present in system. The same rates are picked up by invoice entry screens but for payments it gives us no exchange rate found.
Has anyone faced this problem.

Well, it seems that the "Exchange Rate" field on the Payment form populates when the user selects the Bank Account before the Payment Date field. Previously we were entering the information first in the Payment Date field and than selecting the Bank Account. This was preventing the Exchange Rate field from being populated with the rate.
I just changed the order of the entry and it worked perfectly. Now first we select the bank from which payment is going to take take place and than the date, and the exchange rate is automatically picked up from the rates table.

Changes done in oscolfile.txt are not picked up by CCMS agent

Similar Messages

Maybe you are looking for