Changes in 2.02 - some good, One very bad BUG = All Music Lost.

Just what I've noticed so far in addition to those listed in the AppleInsider thread (the new animation from Music list and album view is still my favorite). Some minor, some major - especially losing all your Music by runing "Reset Settings". Some may be with 2.01 and I didn't notice them.
http://www.appleinsider.com/articles...2update.html
1) Notes: New animation for minimizing from Notes
2) Contacts: ".com" popup menu is hidden in the simple period button [.] Hold to see other options.
3) VPN: Moved in Settings under General > Network.
4) Slight improvement in dragging Icons between home screens.
*5) "Reset Settings" should only have cleared settings and not media, but it broke Music. I could tell by the Capacity values that the files were still there, but I had to resync to get access back to the files. Before that Music was totally empty :(*
6) When I connected to iTunes to resync Music: The option to upload the iPod diagnostics file triggered an automatic backup of my iTouch - presumably due to the contents of the file indicating trouble in the file system?

fishandchips07 wrote:
Its not really a problem. they wont lose the music. when you go into itunes, and you try to pay for something that you have already paid for it just says:
you have already bought this item, to download it again for free, click ok.
No, actually, it doesn't. The Apple Store policies explicitly state one download only. That's why, unless you have turned it off, iTunes will warn you to back up your purchases.
From the Terms of Service for the iTunes Store:
+9a. Products Requirements. You acknowledge that use of Products may require the use of other hardware and software products (e.g., the ability to make copies of Products on physical media and render performance of Products on authorized digital player devices), and that such hardware and software is your responsibility. Products may only be downloaded once; after being downloaded, they cannot be replaced if lost for any reason. Once a Product is purchased or rented (as applicable) and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage.+
http://www.apple.com/legal/itunes/us/service.html
http://www.apple.com/legal/itunes/uk/service.html

Similar Messages

  • My daughter has an iPhone 5 and I want to get her a good combo charging dock and speaker. What are some good ones?

    There are quite a few available. Can anyone suggest the good ones?

    Afraid not. iCloud storage cannot be merged between accounts.

  • SNR from good to very bad in 2 weeks x-Fi

    I don't suppose that there is much I can do about it. But if it would be great to know.
    I bought the X-Fi Go, because my Notebook Onboard Sound had some really bad quality. When I raised the General Volume up to 25% or above there was some annoying background noise. Not loud just this quiet noise that gets annoying in quiet movie scenes, not so loud music or when Sound is turned of and the headphones are still on. When I only raised the Wave (the digital) Volume anything else than the one in the windows sound panel it didn't have any effect.
    The X-Fi Go was great the first days. With 00% Volume I still couldn't hear anything if there was nothing to hear.
    But week later there is a constant noise. Louder than but not as high as the one of the onboard soundcard. Doing anything with the Volume or even switching to mute has absolutely no effect.
    Does this happen often? I use only a longer USB extension cable than the default, but since the singal is digital till it reaches the X-Fi Go, this should have any effect.
    Now I want to send it back as a warranty case.
    I would like to know if you have experienced similar problems with your soundcards?
    greetings duskkk
    PS: This WSIWYG Editor has some serious issues. Enter always puts the cursor to the Top.

    If the DLM has lowered your profile then it is just a case of waiting for it to increase. If the line is stable it will increase to a speed that DLM deems is best for your line. This can and often does take 3 weeks to happen. As far as I am aware all you can do is to monitor it and if it doesn't increase after 3 weeks then you may get some sort of intervention from BT/Openreach. 

  • Very bad bug in ViewLinks

    I created a viewlink between 2 view object exposing both accessors.
    I created a form using theese 2 Vo, going from master to deteils.
    When I try to use the link in the reverse order, going from detail to master, I get a SQL error, it writes the query in the wrong way, still using the VL in the master to detail order.
    I tried to do the same inverting the operation order but I obtained the same (reversed) problem .
    Tks
    Tullio

    Hi Tullio,
    Glad to see im not alone.
    On which version are you getting this??
    I hope not wtih the latest production releases.
    See TAR 3580365.996.
    ORACLE.JBO.SQLSTMTEXCEPTION: JBO-27122: SQL ERROR DURING STATEMENT PREPARATION
    30-JAN-04 06:28:08
    New info : Thanks,
    What do i do now - wait for the patch or close this TAR?
    30-JAN-04 09:04:34
    Close the tar and wait for the patch.
    Regards
    Anders Lindberg
    Oracle Support

  • I am very bad with all of itunes stuff, but could use help...

    I just replaced my iPod that got lost and was wondering how do I transfer my songs from my work computer onto my a new home computer account I opened for my new home computer. I want to quit using the work computer iTunes account after I get them on my new iPod? Any help would be appreciated.

    How many songs are in your work computer's iTunes library?
    If it's just a few, copy them to a USB drive at work. Then go home and import them into your home PC's library & hard drive.

  • What are some good educational apps?

    I am a special ed teacher who will be using an iPad in my classroom next year.  I am interested in educational apps and I know there are a lot out there but I don't want to have to weed through them all to find some good ones.

    Hi Kelli,
    I actually create educational apps for kids in that range.  I have a few apps Rhyme-N-Time (rhyming app), Free The Bee (spelling app) and Trojan Math.  You can find my apps in the app store by searching for the names or by just doing a search on my LLC, which is 'Levott'.  The math one is free and the other two are 50% off in July so only 99 cents. 
    I also belong to a group called "Parents with Apps", which is kind of the new name for "Mom's With Apps", but I could find you several more apps.  I'd bet some of the developers might even get you some discounted rates or promo codes.
    Thanks,
    Scott
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    <Edited by Host>

  • Error in the name of my apple id. After changing for the good one, never get the confirmation email

    Hi all,
    As I went on www.icloud.com, it asked me to switch my apple id username to a email address. I dit it but I forgot a letter, so the mail address is wrong. I want to change it but when I enter the good one, it tells me that I'll receive a confirmation e-mail to validate the good e-mail address.
    I did this plenty of times over the 5 past hours, and I never got a email to validate.
    Does somebody know if it's a server-side issue of if there's some way to past through this ?
    Thanks a lot,
    Ben

    THE email is going to THE wrong one you keyed in

  • I utilise Entourage for my mails. When I tip a mail adress and write a wrong one, I change. When I will send again a mail to the same adress the wrong and good one appears both.  How can I delete the wrong one

    Question is here above but more details here under
    I use Entourage as Mail sender. I don't use the adress book.
    When I tip a wrong adress  and make the correction, the old one stays in the memory of my computer ( apple I Mac ).
    When I wish to send a new message to the same adress, the wrong one appears in the same time , and some time I don't remember wich is the good one .
    To avoid that problem, how can I delete the wrong adress for future sending of mails.

    Solution, use Apple Mail
    I can highly recommend migrating to the Address Book. You won't have the typo'ed history in your email.
    Here's the KB on how to clear the list
    http://support.microsoft.com/kb/823667

  • Opening my Ipad I have an exchange window asking me my password. I'm (almost)sure I type the good one but it doesn't accepIt it. Unable to go around that window so IPad useless. How can I check/change my password with my IPad (stuck) or my home computer ?

    Opening my iPad2 I have an "Exchange " window asking me my password. I'm (almost) sure I type the good one, but it doesn't accept it. Unable to go around it, so iPad useless... How can I recover/check my password on my home PC (or make that window disappear ?

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • What are some good apps for changing the pitch of my music? I currently use djay. Is there anything better?

    I like shifting the pitch of songs, it makes it sound new to me. what are some good apps that can do this? right now I use djay

    I like shifting the pitch of songs, it makes it sound new to me. what are some good apps that can do this? right now I use djay

  • LOADING ADDITIONAL COSTS (change matches revenue cost of goods in warehouse

    Subject: LOADING ADDITIONAL COSTS (change matches revenue cost of goods in warehouse and not accounting for the year 2008)
    Problem:
    we must add the cost of goods of the raw material (for which was made a check invoice) of the costs, which are arising and charged by different suppliers (transport, freight, insurance, etc. ..). These are already included in FI with fb60.
    The result should be:
    - From the consignment of goods entering, add (only in Warehouse (STOCK), NOT IN ACCOUNTING ') cost accessory
    - Do not change the quantity
    - Having the total cost of stock
    - Exploiting the average cost to FIFO must consider the total cost after additional adjustment
    Example:                                                                                data
    ME21N: purchaise order No. 321 = article 1000kg a price of u20AC / kg 2.30               01/07/2008
    MIGO: goods receipt PO confirms price quantity x (u20AC 23,000) batch 298                      07/07/2008
    MIRO(enter incoming invoice): Check invoice OK per (u20AC 23,000) batch 298           07/08/2008
    Invoices received for costs Accessories:                                                                08/08/2008
    FB60: transportation bill on all'purchaise order above cost u20AC / 0.11 kg
    0.11 * 1000kg = 110 recorded in cost and accounting of stock.
    In accounting, the cost has been reported, in warehouse I need to reverse (add) u20AC / kg to 0.11 initial cost of u20AC / 2.30 kg without adjustments in general accounting, but only in warehouse value and not in the quantity.
    So in the end I should have:
    batch n° 298 -  kg  1000 at a cost of u20AC 2.41 (2.30 +0.11) for the year 2008. How should I do?
    thanks

    Thomas,
    I presume that your client has activated 'Revenue Recognition' component in SAP.
    If your client has already activated the RR component, they may be aware that the activation is unreversible.
    Recognition of costs in a deferred revenue scenario requires some customization effort but definitely do-able. It is not falling within standard SAP.
    I worked on scope of one such project but it did not happen unfortunately.
    Can you please post your regular updates in this forum?
    All the best.
    Thanks
    PS: I am not an employee of SAP AG and by answering questions, I am not getting any monetary benefits anywhere. I am answering questions here in my spare time for recognition and the points awarded, which gives me a sense of self-satisfaction. Awarding points is also a way of saying thanks and it will encourage me to answer more questions and share my knowledge and experience

  • Looking for some good documents on performance tunning

    Hi,
    please excuse me, as this is not a technical issue.as i am looking for some good ebooks ,can anybody suggest me some good site from where i can download free. or any metalink number.
    Message was edited by:
    user00726

    Hi,
    Its great to chat with you.. !!
    Really, I am impressed with the things what you have written.
    We are very lucky that such type of Great Person is in ORACLE World.
    As I am eagerly searching for "Practical Oracle8i(TM): Building Efficient Databases " an Hard Copy to read. But, its very hard to find it.
    I had seen Amazon for $44.20, In Our Currency its too high Almost 2000/-
    Can you share with us alteast an PDF Copy of that book.
    It's a request. from my side. and I will be very thankful to you.
    I am searching nearly from past 3 Months.
    Can you write some Book on RAC. I am searching for Good one...
    Thanks & Regards,
    Pavan Kumar N

  • In need of some good artwork or: We need a logo and colors :)

    Hi people...
    As you may have heard somewhere, we are currently developing a new liveCD based on Arch + KDE4, which will be released around the end of this year (or sooner or later, as our motto is "when its done")...
    Well, developing progresses and we have already reached some important milestones, but now we have a serious problem: We need a logo and a colorscheme for both our "identity" and the website of the project.
    We already have a name for the project, but we are seriously lacking some good artwork skills... To give you an impression of our marvellous skills, here is our current mockup of the logo:
    nice, isnt it?
    Ok, as you have noticed, this isnt even rudimentary cool. And now we are asking YOU to create an awesome logo for us
    We would like to see ideas from you, the beloved Arch community. We dont have any rules regarding the logo etc, and are completely open about this... So maybe some of the more gifted people can take this above approach and create something awesome for us... As all of our tools also have rather esoteric names (shaman, tribe, more to come ...), maybe the wikipedia entry for chakra could be helpful for inspiration...
    If you have any ideas, designs, schemes, whatever, dont hesitate to show us them... If there are some submissions, we will choose the one we like the most, and the creator will of course be mentioned on our website as our "creative director" (CEO is already taken by boom1992, sorry ), together with some of our very descriptive Roles (you can choose them!)
    We are looking forward to any submissions, and thanks very much in advance
    Jan
    EDIT: I think i missed something in this post, so i write it now: The colors and the font in the mockup are only there to visualize why we have chosen chakra as the name. Of course you are free to do anything! Just do crazy stuff, let your creativity flow, everything is allowed
    Last edited by funkyou (2008-06-16 18:02:35)

    arch0r wrote:
    i think it should be much more visible, that "chakra" consists of the K for kde and the letters for "arch"
    "A chakra is a center of activity that receives, assimilates, and expresses life force energy. The word chakra literally translates as wheel or disk and refers to a spinning sphere of bioenergetic activity emanating from the major nerve ganglia branching forward from the spinal column. There are six of these wheels stacked in a column of energy that spans from the base of the spine to the middle of the forehead. And the seventh which is beyond the physical region. It is the six major chakras that correlate with basic states of consciousness..."
    by the way, arch live project with kdemod4 sounds kinda nice (hope it doesn't have a gui installer )!
    Oh yeah, I forgot about that meaning for chakra.....

  • HP5L prints 2 bad pages before a good one

    I have an old HP5L black and white laserjet printer purchased in ~1997 (maybe I should not be cheap and upgrade!). It has developed an issue printing on the first couple sheets.
    It is a HP Laserjet 5L Xtra, Model C3941A.
    It will no longer print a self-diagnostic sheet. After holding the button, the middle light will light once, then the yellow light will light once, and then the bottom light illuminates again, and nothing happens. I pulled the printer cable and removed the memory card and tried again (after cycling the power) and no change.
    If I send a file to the printer from any application (I'm in Windows 7), it sends out two pages that look similar to what is attached (there's almost a jagged looking attempt at the first line at the top of the sheet), and then will print the file perfect on the third sheet. And by that, it prints all three sheets (the two bad and then the good one) from one print command. It does not need to be resent. Just eats up paper.
    If something else is sent in quick succession, it will also print out fine. It's almost like the printer has to warm up and then it's ok. 
    I happened to decide it was time to reformat and reload everything from setup files on my computer a couple weeks ago thinking maybe a side benefit would be this problem would go away as something might have gotten corrupt after many years and was sending junk tothe printer. Nope.
    The printer is currently connected through a USB to parallel port adapting cable, but did the same thing when using the parallel port.
    Any ideas on what to try? The printer still makes good prints after the first two sheets come out, but it is really annoying.
    Thanks!
    Chris

    Hi George,
    At this stage you have your table across 4 pages. You have not said if you are using portrait or landscape for printing but it doesn't matter.
    When you click on a table it is selected and the ABC and 123 Column and row titles appear, when the table is not selected they disappear. As you seem to have only one table it's going to appear as selected all the time.
    When the table is selected there are tags on the top right, bottom left and bottom right of the table which you can drag backward and forwards to make more or less rows and columns the tag bottom right does both rows and columns at once. You can also select by clicking on the ABC / 123 titles and use > Edit > Delete.
    It sounds far more complicated than it is, remember the tables are graphics not an excel type grid.
    The Inspector and tool bar have all the tools you require although some are repeated on the format bar.
    Numbers is best used for multiple tables on multiple sheets not single monolithic grids.
    The help option is great too.

  • One very basic doubt regarding J2EE

    Hi Java Gurus
    I want to clarify one very basic point regarding J2EE. As per to my understanding a J2EE is a 3 tier system, proposed by Sun for dvelopment and deployment of component based distributed applications. A J2EE based system requires application server as a middle tier, where business logic runs. So far so good.
    Suppose i have a system which uses only JSPs and/or Servlets (No more EJBs and Application server). This system is also 3 tier system,(Client tier, Web-Server Tier and DB tier). In this case there is Web Server and no Application Server. So my doubt here is===== Can I call this as a J2EE based solution. (Assuming both the systems are performing the same task).??
    Plz help.
    Thanx
    Jam

    A bit of elaboration and clarification. (AKA, the long answer)
    The "3-tier" phrase should avoid any technological implication, thus be defined as Presentation Tier, Business Tier, Data Tier. It's meant to convey the clear separation of responsibility. A JSP/Servlet/DAO system, could constitute a 3-tier system, if applied correctly.
    The J2EE platform encompases a number of technologies, JSP, Servlet, EJB, etc.
    A J2EE compliant application server (i.e. JBoss) supports all the features of J2EE
    A Servlet engine (i.e. Tomcat) only supports a sub-set of those technologies, thus it would not correctly be called a J2EE app server.
    Calling something a "J2EE Application" really doesn't mean much, since many projects don't use every piece of J2EE technology available. Though I will agree that use of EJB is a key indicator. If it makes some manager feel better to call a JSP/Servlet app a "J2EE Application", fine.
    Calling yourself (not you, just the general "you") a J2EE developer, should mean you have experience with developing the breadth of J2EE, so having hacked out some JSPs doesn't count :)

Maybe you are looking for