Changes in 2lis_03_s194  very urject

Hi all,
I want change the update parameters in lis from CALWEEK TO CALDAY.
I HAVE TRY TO CHANGE THE FROM CALWEEK TO CALDAY it's showing data will be lost in infirmation structure.
if i lost the data in r/3 side (2LIS_03_S194)information struture HOW to refill the data in to the information str.
i think i need to run the job again...
please tell me how to run the job in lis and is thre any program for running job.....
please give me solutions asap

Make the change, delete all data and reinit the extraction.
Hope it helps.
Regards

Similar Messages

  • I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered

    I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?

    I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.

  • I am running 10.8.2 and my Safari bookmarks keep changing to some very old bookmarks i had. I replace the bookamrks plist from my time machine backup but they automatically revert back. Please help!

    I am running 10.8.2 and my Safari bookmarks keep changing to some very old bookmarks i had over a year ago somehow. I replace the bookamrks plist from my time machine backup but they automatically revert back. I dont have a time capsule or anything so these bookmarks are obviously being downloaded over the cloud from somewhere. Please help!

    Uninstall Genieo:
    http://www.thesafemac.com/arg-genieo/
    See if that makes a difference.
    Ciao.
    DawnHerbie wrote:
    Also is Safeboot ok to use?
    Yes, it will do no harm, but it is meant for trouble shooting and you should not have to use it all the time.
    Message was edited by: OGELTHORPE

  • Thunderbird autocomplete for PC Version 31.4.0 appears to have changed in a very annoying way (also on the latest Mac version)

    Hi Support,
    I manage email accounts for several users - one of which is my wife. I noticed an autocomplete problem on my version of Thunderbird (on a mac) - and a little while later my wife complained about the same issue on her version (PC version 31.4.0). The problem is that the order in the autocomplete list for the email addresses we have been typing have changed. Instead of the most commonly typed version of an email address which we used to use appearing at the list top, it now lists old email addresses and badly formed email addresses that we have not seen for ages. This is causing havoc as we think we have sent an email to the right person e.g., [email protected], but instead an old (like 6 years old) one comes up at the top of the list ([email protected]) or badly formed email addresses ('me>> <[email protected]). Since the order used to be correct we often hit send too quickly only to find we sent the email to the wrong place or fails.
    It seems unlikely that this issue is only confined to us as we have both hit this problem independently on different operating systems after recently upgrading Thunderbird. I hope there is a fix for this either now or in the very near future or I will have to clear out the saved addresses or if it persists - use a different email client.
    Cheers
    Peter

    It is a combination of a bug and a misguided change in the search option. The auto complete used to go on "starts with" but now it uses " includes".
    We keep hearing that they are working on a fix but so far all versions after v31 have this issue.
    The last general release that worked properly was v24.6. You might want to go back to that version.

  • Impressionist brush only changes white and very light colours

    I'm new to Photoshop Elements and am trying to grapple with the Impressionist brush.  It seems to function like CS5's Art History brush except that I cannot get it to affect mid and dark value areas.  It appears no matter what the area or tolerance settings to change only whites and very light colours.  Is this a known issue or am I missing something?
    Thanks.

    Try resetting the impressionist brush tool by clicking on the
    little downturned arrow and choose reset tool.
    It's somewhat similar to photoshop except, you can't choose
    a history state to paint from, so make sure your not painting
    on a blank layer. To effect the photo, you have to paint on the actual layer
    that photo is on.
    MTSTUNER

  • Itouch 4g in facetime got really hot at the top and then the screen changed to a very light blue.  I restored it and checked for updates, but the screen is still messed up and the itouch gets very hot.  This came on very fast.

    Can't get the screen back to normal mode after restoring it, and it still gets very hot at the top when using it in any mode.  Any suggestions?

    Can't get the screen back to normal mode after restoring it, and it still gets very hot at the top when using it in any mode.  Any suggestions?

  • Attribute Change Run taking very Long time.

    Hi Experts:
    We are daily loading Master data from one common process chain. There are 33 Infoobjects which are getting activated in Attribute Change Run Process. This process is taking almost 3 hours to run daily; due to this it is impacting our other data load process chains.
    Many times it happens that there is lock on cubes due to attribute change as attributes are getting aligned to same cube on which the roll up is running.
    There are local chains below the attribute change run, which are also important to run.
    Please help and suggest the workaround for the same.
    Cheers,
    Omkar

    33 info objects in one ACR(attribute change run) is not a good idea.
    Better to split the info objects and use multiple ACR.
    During your ACR if transaction data load was on then lock issues always occurs.
    Thats why we need to run master data loads first and later transaction data loads.
    Which info object change run was troubling, better to note the info objects which are causing and try to put them  in separate ACR and trigger it before start of your transaction data loads. so that it won't raise the same issue again.

  • AP1522 changing parent node very frequent & 2 RAPs are creating a loop

    Hi,
    i have 2 issues..
    i have 7 units of AP1522 installed, 2 units as RAP and 5 units as MAP. The system is up and running. i have the following problem.
    1) The MESH AP changing the parents every now and than.
    2) My 2 RAPs connection has been deteced as a loop at my CE500 Switch and on port will be blocked.
    following msg from cotroller "(Cisco Controller) >Thu Dec 18 12:41:06 2008: spamMeshExcessiveParentChangeAlarm :: Mesh AP 00:23:05:2D:AC:00 changed a parent 3 times within 60 minutes.
    Thu Dec 18 12:41:37 2008: spamMeshExcessiveParentChangeAlarm :: Mesh AP 00:23:05:2C:EB:00 changed a parent 3 times within 60 minutes."
    has anyone came across this situation on 2 RAPs before.

    Hi Dennis, thanks for your brief info, i have tried all those thing and the spanning tree loop problem is now solve in the latest release XX.35M.
    Now when i have 2 RAP connected to CE500, all AP and controller working fine but when i unplug 1 unit of the RAP from the CE500 switch i fond that both RAP link is down. in some tries 1 RAP come up again after about 15 to 20 min and some times my mesh link is fully out from the controller. Can i assume that when i unplug 1 RAP the other RAP works as the primary and make connections available.
    Am i correct to say that when i have 2 RAP in the mesh network, both work at the same time 1 fails also another one works find.
    Please advice me if anyone came across this situation.

  • The console font change to a very little font... [SOLVED]

    On booting, when displaying all messages the font is big.
    When arriving to the [DONE] part, the font becomes smaller, while the font was bigger 1 week ago.
    It's hard to explain because I can't take screenshots, but if anyone can help me to restore the bigger font...
    This is my rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="es_ES.utf-8"
    HARDWARECLOCK="localtime"
    TIMEZONE="Europe/Madrid"
    KEYMAP="es.map.gz"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # Scan hardware and load required modules at bootup
    MOD_AUTOLOAD="yes"
    # Module Blacklist - modules in this list will never be loaded by udev
    MOD_BLACKLIST=()
    # Modules to load at boot-up (in this order)
    # - prefix a module with a ! to blacklist it
    MODULES=(ipw3945 8139too mii cpufreq_powersave cpufreq_userspace
    freq_table acpi_cpufreq asus_acpi)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    HOSTNAME="samantha"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
    # interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth0="dhcp"
    eth2="dhcp"
    #"eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(lo !eth0 !eth2)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng crond hal hwd cpudyn @alsa ipw3945d
    laptop-mode !network netfs dhcdbd networkmanager gdm)
    # End of file
    Greetings
    Last edited by Davigetto (2007-05-29 19:27:24)

    I have erased the "keymap" hook on mkinitcpio.conf, i have done "pacman -S kernel26", and all was solved. I don't know why loading keymap hook causes this problem while I have always had keymap hook active... I will make another post talking about the keymap hook after posting it as a bug (i have to make me sure that it's a bug...)
    Thank you very much, patroclo, you have helped me a lot ^_^
    Greetings
    EDIT: Well, I have seen that configuring properly rc.conf, adding keymap hook to mkinitcpio.conf, and reinstalling kernel, solves all problems. I can sleep now
    Last edited by Davigetto (2007-05-29 19:27:06)

  • I want to know why you have changed from the very simple, uncluttered google search box to this awful, busy front page? If this continues I will probably go to Internet Explorer although there's is almost as 'busy'.

    We used to get, when clicking on Mozilla, a simple box (Google) with a space to put the subject you wanted searched. Simple and uncluttered. I went to Mozilla because of this, as Internet Explorer was messy and cluttered. Imagine my dismay when I find Mozilla has gone the same way!!! I do not want 'Alot' as the homepage for searches, nor do I want all the crazy advertising, etc. - I just want the simple, uncluttered box back but do not know how to achieve this.

    I have sad and urgent news for you, Mozilla has not gone this way - it is still the simple box for the rest of us.
    '''You are infected with Malware that profits from those adverts'''

  • My email font size change to a very small font. It's hard to read. I change page scale, but that did not work.

    My email is extracted off the comcast server. When I downloaded firefox 4, I email font dropped to a much small font. It's hard to read and I can't figure out how to increase the font size.
    Everything was fine before firefox 4

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • Lumia 820 Display Changes Itself to VERY LARGE Til...

    I can't find similar reports/solutions anywhere: my 820 sometimes resizes all of the display to giant tiles, of which I can just see snippets. I can't get it back to normal without turning it off and restarting it.
    I'm not talking about the difference between small tiles and large tiles - I have a mix of those. When this happens, everything gets too big. If I can get to settings, some functions don't even allow me to scroll over to the slider switch.
    Suggestions welcome!
    Solved!
    Go to Solution.

    Go to settings-->ease of access-->Screen magnifier.. and set to OFF
    Read more detailes under the option as seen in the Attachment
    Attachments:
    wp_ss_20130619_0001.jpg ‏41 KB

  • Firefox suddenly changes to very basic text only view

    When I'm on the internet e.g. doing shopping on Ocado.com the internet suddenly changes to a very simple text only type of layout (i'm no tech whizz - it looks like a word document rather than an internet page?) I don't know whether this is Firefox or something else on my new laptop. Please can anyone give me a tip?
    Thanks

    thank you! I will try that

  • Very Slow and Script Errors

    Contribute 6.5 is very slow to publish new content to our site www.mrii.ie, even bringing up a page for editing is slow. So far I have:
    Tested the the FTP settings using passive and active connections.
    Using an external FTP program, downloading from the site is very quick 2. I checked all the file permissions on the server and they are correct. In fact Contribute will publish the changes eventually, just very slowly prior to the actual upload which seems pretty quick.
    I also used a plain page with a small amount of text and again the pre-processing seems slow.
    I removed the temporary sites and configuration folders and still no change.
    I created a new connection.
    As an aside, how do I disable script errors in the Contribute browser window?

    OK, found it.  This fixed my performance issue.
    https://discussions.apple.com/thread/2536941
    This fixed my Genius issue:
    Turned Genius off
    Closed iTunes
    Launch Safari
    Preferences/Security/Cookies
    delete the apple.com entries

  • How can I change the color of chart in webi report

    Hi :
      I create one Webi report including one table and chart  In BO 4.0.
    The chart  display  the relationship between sales-amount and profit amount . I do not want to use the default color but want to specify the red color for sales-amount and yellow color for profit amount . How can I do it ??
    Thanks Very Much
    Emily MA

    Hi,
    You can change the color very easily. It's simple & straight forward which I found it couple of days back. (Sometimes simple things are hard to find :-p )
    Select the area in the Chart that you want to change color, then go to Format > Style > Background color. Now select the color that you want. In the attached picture, I have selected Yellow color for a piece of pie chart.

Maybe you are looking for