Changes in Application form?

Hi Gurus,
Can any1 please let me know...How to make modifications to the application form which has SAPscript attached??
My requirement is to do coding for some lines on the SAPscript and I have extensively worked on Smartforms so not familier with SAPscript.
Pls. help me out....if any material or forum post is there pls. post the link....thanks in advance
I wanna make modifications to th existing SAPscript...

You must use SE71 transaction to change sapscript forms

Similar Messages

Font size, spacing in editable PDF document (application form)

I am trying to fill out an application form that has already been created by a university. The form's instructions indicate that applicants must fill in the fields using Times New Roman 12 point font with 1.5 spacing. However, nowhere in Adobe Reader do I see any option for changing the parameters of the text that I can type into the fields. Is this even possible?
Here is the link to the document in question, if that helps:
http://www.admission.uottawa.ca/Portals … E_2010.pdf
Thanks!

With Adobe Acrobat you can change the font in the text fields.

How to attach a document from cloudOn to my online application form or website

How to attach a document from cloudOn to an online application form or website?

You will need an app (web browser) capable of both storing a document and accessing the site's functionality sufficiently enough to upload a file. Safari can't do this (and I'm pretty certain CloudOn can't either). A couple of options:
iCab Mobile - store documents in the Downloads section and has settings to both change the BrowserID to a non mobile browser to unlock site functionality, and has a setting for uploading files from its storage rather then iOS in general. Its not free, but not very expensive and is a pretty could all around web browser in its own right. I've been using it for quite some time.
iUploader - has both free (trial) and paid versions. I've only experimented with it a bit, but works fairly well. Like iCab, has its own file container that you up load from.
In both cases you would need to transfer your files from the source app (CloudOn, in this case) to the file storage, and then access the website.

How to change the application title in apex while importing it ..

Hi ,
I have an issue here. As per the requirements I need to change the application title in Apex while
importing it from One instance to another instance.
Ex: My application title is WATERFALL PORTAL in iWATERFALL instance ,it must be changed to PUAT PORTAL if im Importing it to PUAT instance.
This change has to be done Dynamically. Without Entering it Manually.
Kindly help me out and Will be Great for your Assistance.
Thanks,
Vishal

1001804 wrote:
Hi ,Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "1001804".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have an issue here. As per the requirements I need to change the application title in Apex while
importing it from One instance to another instance.Please clarify what you mean by "application title". The Application Name in the application definition? The displayed Logo in the user interface properties?
Ex: My application title is WATERFALL PORTAL in iWATERFALL instance ,it must be changed to PUAT PORTAL if im Importing it to PUAT instance.
This change has to be done Dynamically. Without Entering it Manually.Also clarify what you mean by "instance". An "APEX instance" refers to the APEX installation in a database. The "APEX instance" does not have a specific name property, and would therefore usually be referred to using the database name. Or do you mean the APEX workspace containing the application?

Change the PDF form In HAP_DOCUMENT

Hi Experts,
1)I have a requirement wherein i need to change the pdf form that is generated when we click on download button in hap_document bsp application. I need to use the custom PDF form in place of the actual PDF form. How can i acheive this?
2) In the layout, i want to replace some part of the screen with an interactive adobe form how to acieve this?
Thanks and Regards,
Madhu.

This should not be handled by ABAP. If they were able to change it in the sales documents, they should be able to cancel the invoice in VF11 and create another one. That's the best practice.

Date Formats in Oracle Applications Forms and Oracle Self Service

Can someone tell me what determines the Date format that appears on Oracle Applications Forms and Oracle Self Service ?
*1.* In Oracle HRMS,all dates i see on the Forms are of the Format "MM/DD/YYYY" but my NLS Parameters are not in this format .I'm giving the results for the NLS parameters below.I thought the date formats are determined by the NLS format.Is there something else that determines the date format appearing on Oracle Applications Forms ?
NLS_DATABASE_PARAMETERS
NLS_DATE_FORMAT     :DD-MON-RR
NLS_DATE_LANGUAGE     :AMERICAN
NLS_LANGUAGE     :AMERICAN
NLS_TERRITORY     :AMERICA
NLS_INSTANCE_PARAMETERS
NLS_DATE_FORMAT     :DD-MON-RR
NLS_DATE_LANGUAGE     :
NLS_LANGUAGE     :american
NLS_TERRITORY     :america
NLS_SESSION_PARAMETERS
NLS_DATE_FORMAT     :DD-MON-RR
NLS_DATE_LANGUAGE     :
NLS_LANGUAGE     :american
NLS_TERRITORY     :america
*2* What about the profile option : ICX_DATE_FORMAT_MASK ? Does it determine the Date Format for Self Service alone or does it impact the date format appearing on Oracle Applications Forms and the actual database also ?
*3* If I use a to_date function in ,say, a pl/sql function that i code for some custom requirements,what will be the output of the date format ? Does it take the format given in NLS paramaters or is it determined by anything else?
Thanks in advance...

Hi,
Thanks for your reply ,but I'm still confused ..
Here are the profile options I'm seeing for one of my instance :
ICX: Date format mask - 12/31/1999
ICX: Date language - American English
ICX: Language - American English
ICX: NLS Sort - BINARY
ICX: Territory - United States
ICX: Numeric characters - NULL
NLS parameters are given in my original email.
In Self Service applications(OAF) ,the date format is appearing in "mm/dd/yyyy" format but when i login to Forms based applications ,I see the date format as "dd-mon-yyyy".What determines this date format ?
How can i make the date format to always return one format everywhere ,be it Self Service (OAF) or Oracle Forms ?
I'm getting date format related errors for my code because of default date formats changing intermittently when i log into Self Service.I want to know if there is anyway to prevent this from happening?
Thanks in advance.

How to call application forms from network directory on other machine

I have installed Oracle Application Server 10G Release2 without IDS (Developer) on my server. I put my application forms & reports on the same machine(APPSERVER) and run the application as follows:-
http://appserver.www.ebs.com:7778/forms/frmservlet?form=\\appserver\pass_3_1.fmx
My Application runs well. But i want to use the 'Pass_3_1.fmx' form from other machine's(SERVER) network folder as below:-
http://appserver.www.ebs.com:7778/forms/frmservlet?form=\\server\pass_3_1.fmx
I am not able to launch my application. It throws error 'Cannot read form \\server\pass_3_1.fmx'. I also tried mapping on F:\. But it didn't work.
Please advise . Thanks in Advance.
Regards

Hi,
I don't understand exactly your problem but I tel you that your application mast be reside in the application server and the URL to call your application shouldn't change:
http://appserver.www.ebs.com:7778/forms/frmservlet?form=\\appserver\pass_3_1.fmx
good luck.
Soufiane

Detect changes on tabular form

HI guys!
Is there any way to detect that there were some changes made on tabular form? My Client wants me to create items which are conditional upon changes made on tabular form. IE button X is only visible if there were no changes made on tabular form.
With regards,
PsmakR

Hello Konrad,
>> Stronger should be hiding button because there are changed cells …
OK. This is the simpler scenario.
The button should be rendered upon loading the page, as at this point there are no changes to the form.
You should leave the checkbox column, which selects your rows, unchanged (event free), as it doesn’t affect the visibility status of the button – it should remain visible even if rows were selected (without changing any other cells).
As I suggested in my first post, you should use the onchange event with all the other editable columns. The event should call a JavaScript function that hides the button, because when fired it means something has changed in one of the cells.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Changing the application that a file type opens with

I have MSFT Excel and Subethaedit installed...
I want Subethaedit to open all "*.spad" files
I go to "Get Info" then go to "Open with:" then choose Subethaedit
Then I press "Change All...", a dialog pops up and asks if I want to apply the change to all documents of the form "*.spad", and I answer "continue" and then...
It ignores me; it drops Subethaedit from the list of apps to "Open with" and doesn't change the default format.
How do I force the type to change to the app I want? Is there a text-file I can munge somewhere?
mac mini Mac OS X (10.4.8)

Hi, thechao. Welcome to the Discussions.
It's possible your launch services database is corrupted. See my "Resetting Launch Services" FAQ. Then try the procedure you defined earlier, which is also described in "Mac OS X 10.4 Help: Changing the application that opens a document."
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Testing Application form

Hi experts,
I have copied an application from Client 000 : FMCA_INVOICE_SAMPLE to my testing client as ZFMCA_INVOICE_SAMPLE and also created a link.
When I try testing it gives me an error "Test printout is not possible for application form ZZFMCA_INVOICE_SAMPLE'.
What could be the possible reasons?
Is it not all the App form having the testing functionalities?
Govind Parmar

Hi,
While defining the Form class there is a check box 'No Testprint' is selected then test print is not possible.If you want to test print you have to change values in debugging.This field values is saved in table EFCL and field name NO_TEST_PRINT. By debugging if you change this field values to space then you can able to debug.
To check above field go to EFCS tcode and select attributes of your form.
Thanks
shyla

How to change the application icon in 10g

Dear all,
how to change the application icon in forms 10g. i mean the icon which is located on the window it self.
Best Regards,
ShoooSh

Hello,
<p>Maybe you could find a solution in this article</p>
Francois

Required Trigger To be Oracle Application Forms Customization and its order

Hi All,
I am new to oracle application forms customization.
Can you please answer following?
What are the triggers required to be overrided for forms customization in oracle appliocation?
What is the order of trigger event occurrs when forms comes up in Oracle application?
Thanks
Prashant

Hi Prashant,
There are a number of triggers in Oracle forms. They are basically 4 types
1. Form level
2. Block Level
3. Record Level
4. Item Level
Again there are subclassifications.
The firing sequence depends on your action. If you make a change in an item and save the item level triggers fire for the item you changed. Then the record level triggers fire. However if you are click in an item(you are technically navigating to the item) the record level(when new record instance-WNRI) fires and then the item level trigger(when-new-item-instance WNII) fires.
So it depends on the situation. Look in the forms tool help sections. The have some good discussions there.
Now to 'override' triggers. I am assuming you plan to extend oracle standard forms. The best way to do this is use the CUSTOM.pll. Oracle forms call this .pll in various triggers such as WNRI, WNII etc. You can add your logic here and it will take effect and will be upgrade safe. Nowadays they have forms personalization. Take a look at this also to determine the best way.
You may want to read the Application developers guide from metalink and they have a good discussion there on forms customization. It also talks about the CUSTOM.pll
The scope of forms is huge and you would be better of taking a
1. Forms course
2. quick look through the forms section of the developer's guide and understand the concepts
3. Honing on the customizations you want to do and start working on that specific component.
4. Look in Metalink which has a lot of info on forms and forms forums.
This is actually a Framework forum which deals with Web applications :-)
Thanks
Sandeep

Query regarding Application form

Hello,
         If it is possible to change form class of application form??
         Please suggest me.
Thanks,
Tiya

Hello Sanjeev,
     I want to change form class of application form and when after selecting radio button of form class
     i click on change mode error message popup
     Change mode permitted for original language DE only
     by following this i try to change language to DE Edit->Set Language,even though language can,t
     change to DE and i m unable to open form class in change mode.I follow TCODE:EFRM.

Calling application form from another application form

hi
I am working on application forms in SAP-ISU. I wanted to call one application form from another application form. Please help me.
Regards,
suresh
[email protected]

Hi,
Suppose there r 2 applications X and Y. There will be 1 programe associated with each applications.
We have to change the programe of 1 application and call 2nd programe in the 1st programe using SUBMIT keyword.
Reward points if useful.
Regards
(YUGANDHAR.P)

Looking for documents on application forms

Hi all,
I m looking for some documents on application forms (transaction EFRM).
step by step documentation for changing a form.
Thanks.

Hi,
1. Do yo have 1 to 1 relationschip between a form class and an application form?
No , It is not 1 to 1 Relationship
so if i have to make a new smartform/sapscript do i have to make a new application form/application class?
For creation of smartform or script , you dont need to Any Application form or Application class
2.
Where in the system i can assign a form to the class?
If it is Adobe form (Tcode SFP), You have to create Interface and form, And assign interface to form , whenevr we are going to create form that momemnt we have to provide implenation name , Check SFP Tcode.
3.
some one has for me a step by step tutorial hoe to make changes?
Regards
Jana
Are you going to change smartform or script, If it is smartform or script, No need to assign to Applcaition form

Changes in Application form?

Similar Messages

Maybe you are looking for