Changes in backing bean are not considered for deployment

hi,
i'm not sure whether this is a jsf specific issue but..anyway, here's the case: I'm using eclipse ( lomboz) as ide and whenever i change something in my backing bean (let's say add a new method) it is not found after redeployment neither after clean command. after some startups the changes eventually are adopted. this is really annoying as just starting the server takes me half a minute. so if anybody ever had the same or similar problem or has any experience with hot deployment please sent me a clue.
regards,
jens

>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport. Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing. The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

Similar Messages

Why Certified Freshers are not considered for Job Openings?

Hi
I am Mohan.
I got certified in FI Module and updated my profile in all the job sites but I didn't got any call from any rectuiter.
Why is the situation like this?

Hi Mohan,
Only few companies will recruting SAP Certified Freshers..But as a certified consultant get more calls rather than non certified freshers...In mumbai Reliance,Fujistu ,capgemini, recruiting certified freshers..
Dont worry wait for time..one fine day u will get it good opportunity.
Regards
Kalpana

On firefox clickable buttons are not clickable for me eg the + to open new tab ,the sign in . register and other applications buttons on this page wont click yet the 2 blue change buttons are fine

Question
on firefox clickable buttons are not clickable for me eg the + to open new tab ,the sign in . register and other applications buttons on this page wont click yet the 2 blue change buttons are fine

Top of Firefox window non-responsive, toolbars non responsive -- also see [http://kb.mozillazine.org/Problematic_extensions Problematic extensions]
*caused by Yahoo Toolbar -- https://support.mozilla.com/questions/890908
*caused by Babylon Toolbar -- https://support.mozilla.com/questions/890670

Open Items not considered for Payment Lot

Hello Experts.
I have created some open items using FPE1. They are displayed as due in FPL9. But the same open items are not selected in FP06 for clearing. They are also not considered for clearing in a payment lot (FP05).
Can some one tell me what could be the reason for this
Best Regards
Venkat

If you have a clearing restriction, to be able to remove it when you change the document in FPE2 for example you need to activate that clearing restriction in:
Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Open Item Management > Define Modifiable Clearing Restrictions
If you don't do that you cannot manually change it.
Adriano.
PS: Again are people in these forums that put answers to be in the statistics... GOD..

Changes to Excel files are not getting updated

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.

Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

TS1474 Inspite of following the instructions for authorization of my iMac and my ipad I am unable to sync a movie from my iMac to my ipad. All I get is a message that says you are not authorized for it on this computer. Any idea what is wrong?

Not able to sync movie purchased from itunes from imac to ipad2.

try this:
redmatter
This helped meRe: not copied to iPad because you are not authorized for it on this computer
Nov 20, 2011 10:41 AM (in response to hoppo72)
One workarwound is to do the following:
1. Remove the digital content from iTunes (but keep the files)
2. Rename all .m4v files to .mp4 files
3. Add the files back to iTunes
This seems to fix the problem for me
Hope this helps

My computer recently crashed, got most of my songs except for about 300 becasue they are not authorized for my computer but my computer is authorized, how do i authorize those songs to put them on my playlist?

My computer has recently crashed and i am trying to set up my itunes account back up again. Most of my 796 songs transfered except for about 300 of them. itunes keeps telling me that these songs are not authorized for my computer but my computer is authrized so how do i authorize these 300 songs so i do not lose them? PLEASE HELP!!!!!!

In Itunes,
-Cllick the Upper Left menu icon.
-iTunes Store
-Authorize This Computer...
-Alan

Stateful Session Beans are not passivated / serialized when cache idle time

Technology: Sun Application Server version 7.0.0_01; JDK 1.4.1; developed on Windows 2000; Tested on Sun Solaris.
Initial error on Sun Solaris:
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr: Exception in thread "service-j2ee-25" org.omg.CORBA.OBJ_ADAPTER: vmcid: SUN minor code: 1015 completed: No
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.POA.GenericPOAServerSC.preinvoke(GenericPOAServerSC.java:389)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.POA.ServantCachePOAClientSC.initServant(ServantCachePOAClientSC.java:112)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.POA.ServantCachePOAClientSC.setOrb(ServantCachePOAClientSC.java:95)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.createDelegate(CDRInputStream_1_0.java:760)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.internalIORToObject(CDRInputStream_1_0.java:750)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_Object(CDRInputStream_1_0.java:669)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_abstract_interface(CDRInputStream_1_0.java:890)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_abstract_interface(CDRInputStream_1_0.java:884)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.iiop.CDRInputStream.read_abstract_interface(CDRInputStream.java:307)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.se.internal.io.IIOPInputStream.readObjectDelegate(IIOPInputStream.java:228)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.se.internal.io.IIOPInputStream.readObjectOverride(IIOPInputStream.java:381)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at java.io.ObjectInputStream.readObject(ObjectInputStream.java:318)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.enterprise.iiop.IIOPHandleDelegate.getStub(IIOPHandleDelegate.java:58)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.enterprise.iiop.IIOPHandleDelegate.readEJBObject(IIOPHandleDelegate.java:38)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.ejb.portable.HandleImpl.readObject(HandleImpl.java:91)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.se.internal.io.IIOPInputStream.readObject(Native Method)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.se.internal.io.IIOPInputStream.invokeObjectReader(IIOPInputStream.java:1298)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.se.internal.io.IIOPInputStream.inputObject(IIOPInputStream.java:908)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.se.internal.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:261)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.se.internal.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:247)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.se.internal.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:209)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:981)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.iiop.CDRInputStream.read_value(CDRInputStream.java:287)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.copyObject(Util.java:598)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at javax.rmi.CORBA.Util.copyObject(Util.java:314)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.telstra.nodeman.ejb._NodeMaint_Stub.getHandle(Unknown Source)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.telstra.nodeman.arch.NMAViewBeanProxy.checkBeans(NMAViewBeanProxy.java:631)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.telstra.nodeman.view.html.NMAStandardButton.handleRequest(NMAStandardButton.java:143)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.telstra.nodeman.arch.NMAViewBeanBase.handleRequest(NMAViewBeanBase.java:1573)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.iplanet.jato.view.ViewBeanBase.dispatchInvocation(ViewBeanBase.java:824)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:637)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:595)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:772)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:446)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.telstra.nodeman.view.ViewServlet.doPost(ViewServlet.java:243)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at java.security.AccessController.doPrivileged(Native Method)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:158)
[10/Aug/2004:08:04:57] WARNING (17227): CORE3283: stderr:      at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)
The above error caused the server to use all available memory and required a reboot to proceed.
Subsequent testing against the Sun Appliucation Server 7 on Windows 2000 dev environment using the Sun Studio IDE for debugging and trace statements inserted in the code indicate that the Application Server is removing the Stateful Session Beans when they time out without an ejbPassivate event and without serializing the beans to the data-store. cache-idle-timeout-in-seconds set to 180 and removal-timeout-in-seconds set to 1800.
The server.log indicates that the beans are timing out:
[19/Aug/2004:18:15:10] WARNING ( 1664): [NRU-com.telstra.nodeman.ejb.AddressMaintBean]: IdleBeanCleanerTask finished after removing 2 idle beans
Trace statements inserted in ejbPassivate do not appear in the log.
It is my understanding that the above timeout should have caused an ejbPasssivate and serialization of the beans.
The beans have been validated using Sun Java Studio Enterprise 6 with 'EJB validate'.
My reading of the problem is that the beans are not being serialized and the error occurs when the application attempts to reference (getHandle) the bean after timeout.
Any suggestions would be appreciated.

Thanks Thorick.
I am using NRU caching. WL 7.0 SP2.
I have not defined idle-timeout-seconds in my weblogic-ejb-jar.xml. As I understand
the default value for this is 600secs. So the ejbs should be removed after this
time. Below is the
weblogic-ejb-jar.xml that I am using.
<!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 7.0.0 EJB//EN'
'http://www.bea.com/servers/wls700/dtd/weblogic-ejb-jar.dtd'>

<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>Cart</ejb-name>
<stateful-session-descriptor>
<stateful-session-clustering>
<home-is-clusterable>true</home-is-clusterable>
<replication-type>InMemory</replication-type>
</stateful-session-clustering>
</stateful-session-descriptor>
<transaction-descriptor>
     <trans-timeout-seconds>
          60
     </trans-timeout-seconds>
</transaction-descriptor>
<jndi-name>CartHome</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
"thorick" <[email protected]> wrote:
>
The idle-timeout-seconds property controls the timeout/removal behavior.
which stateful session cache type are you using ? LRUCache or NRUCache

Excise Details are not maintanied for Vendor: GRN error

Dear All,
We have upgraded our Ecc 6.0 system to latest application SAPKH60016 ( SAP_APPL ). WHile testing the system, for import GR's we are getting error saying Excise Details are not maintanied for Vendor. J1ID is also maintained & previously we have received lot of GR's for the same vendor. No changes have been done to Vendor & CIN master.
Please let me know if any note or object to be updated to correct this error.
Thanks
Raghavendra.

hiii
Can u tel me where exactly the excise range was missing ??
Because if excise range is missing , it won't throw this lind of error .
U have found any other???????
Thnaks
SAP-MM

Excise Details are not maintanied for Vendor, Message no. 8I565;

Hi Gurus,
We have up-graded system from 4.7 to ECC 6.0, Now encountering following error while capturing Excise at MIGO.
Excise Details are not maintanied for Vendor 0000202040. Message no. 8I565;
Kindly suggest a solution for the above error.
Best regards
Naveen D'Souza

Hello ,
Excise Details are not maintanied for Vendor 0000202040. Message no. 8I565
The above given error is common while MIGO while capture of excise invoice. The above written guys are correct, please check J1ID for that Vendor,
1) if after maintening also , suppose you get the above error while MIGO, then select "Only Part1" option in MIGO , and press Check Button, if error goes,
then again go back and select "Capture excise invoice", then system will not give you the above error while Capture of excise invoice in MIGO.
Please check some SAPOSS notes also.
Regards
Mahesh Naik.

Reg msg "Payment method(s) are not allowed for this program".

Hi...
I am copying a standard program RFFOES_T (Print program for bank transfer) into a custom program. When i try to execute the custom program it gives me a msg saying
"Payment method(s) are not allowed for this program".
Can you please Provide a solution for this problem.
Regards,
Indira.

Indira,
1.RFFOES_T is using Logical database PYF.Seems you have copied it as it is without changing the attributes of the program.
2.As it is using logical database PYF it needs to be tagged to the respective payment methods in FBZP settings as below
FBZP
>>Payment methods in Country
>> in the next screen click on position and give the company code and payment method
>> in the next screen select the corresponding payment method and click on the details(ctrlshiftf2) ie magnifying glass icon
>>in the next screen within Payment Medium you will get to see two radio buttons as Payment medium workbench(uses DMEE tree structure) and payment medium programs (uses the standard prog).Here in Payment medium Program either the standard prog or your zprogram should be tagged otherwise you will get the error message as you mentioned.
3.Once you tag the program in the FBZP setting to the respective payment methods,after the payment run you will be able to run the program.
4.If you don't want the program to be linked to FBZP settings then as far as my knowledge is concerned you need to avoid using logical database PYF and change the entire code using the regular database tables like reguh,regup,bkpf,bseg etc.(I think this should be the best approach)
Thanks,
K.Kiran.

Changes made in BOM are not reflected in Configurator.

Hi all,
When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
This program has 2 parameters one for folder and the other for Configuration Model Id.
When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
We don't have a separate instance for COnfigurator.
Do i need to do any set up so that my Configuration model is reflected in the LOV?
Can anyone please help me on this?
Oracle Apps version: 11.5.10.2
Configuration software build: 11.5.10.25.43A
Regards,
Sreekanth

Hi Jason,
Please see my comments below
Jason said*
Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
Ex:
When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
Can you please explain this?
Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
Jason said:+
Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
a. A Model (PRJ = Project)+
b. The Model cannot be deleted (Deleted_flag must be '0')+
c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
Regards,
Sreekanth
Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

Requirements are not fulfilled for condition PI01

Dear SD guru,
        When i create sales order,it prompt that 'Requirements are not fulfilled for condition PI01'.
          For the specifical requirement,i use the intercompany processing.I want two invoices in this sale document,onr for customer,the other for internal processing.So i need two condition types for two price,i use the condition type ZABC&PI01(for internal) in the pricing procedure.But,when i create sales order under the configuration,it failed.
      How can i solve the problem?
TKS!
Edited by: stephen chow on Sep 8, 2008 9:35 AM

We need to change the condition class from prices to other like discount or surcharge in the condition type.
For ex: If it is shipment cost document got to goto T_06 select the required condition and change the condition class and do not select grouping conditions..
Thanks,
ratna
Edited by: ratna edpi on Oct 24, 2008 6:04 PM.
Edited by: ratna edpi on Oct 24, 2008 6:05 PM
Edited by: ratna edpi on Oct 24, 2008 6:07 PM

Changes in backing bean are not considered for deployment

Similar Messages

Maybe you are looking for