Changes in currency field in standard screen

hi.
i have to change, number of decimal places for currency field in standard transactions.
i.e 2 decimals to 4 decimals.
please! how to do it.
Regards.
Sreenu.

Check the Tcode OY04.
these values are maintained in TCURX.

Similar Messages

  • Adding field to standard screen in tr. FPSEC1

    Hi,
    I need to add customer field to standard screen in FPSEC1 transaction (screen 202,second screen in transaction (non cash choice)).
    Has someone did it already?
    (please don't give me general advices as "find screen exit" and so on...)
    Point's will be given.
    Regards.
    Yossi.R.
    *sorry for crossposting

    How you solved this.
    I am facing same problem
    Please reply.

  • How to remove fields from Standard Screen

    Hi,
        I Have faced one problem in screens(se51). When apply one SAP Note i have to change the screen manually(as per Note ) . My requirement is to remove some text fields and label fields. But I cant delete the Fields.
       Normally just select the object and Press delete Key to remove one object from screen. But here it is not working.
      How can i remove the objects from the screen as per SAP Note.
    Thanks in Advance,
    WIth Regards,
    Neptune.M

    Hi,
    T.code SHD0 helps you control which fields to appear, suppress and make mandatory in Standard Screen.
    refer
    https://forums.sdn.sap.com/click.jspa?searchID=4359065&messageID=2961760
    Regards

  • Adding Z-Fields to Standard Screens of Transaction VA01 / VA02 / VA03

    Hi All,
    The system is being upgraded from 4.7 to ECC 6.0
    In 4.7 server, the client has added 2 Z-fields to VBAK table. Moreover, these Z-fields are added to Standard SAP Screens of Transactions VA01 / VA02 / VA03.
    One of the Z-field is for the Description which appears on the very first screen of transaction (Screen 4440) replaces the Standard SAP Screen Field VBAK-KTEXT.
    The other Z-Field appears on Header-->Additional Data B (Screen 8309).
    Please note:- The screen numbers that are mentioned above are the screen numbers of ECC 6.0
    I tried to change the edit the Screen by taking the Access Key from the market place, but only got Screen Overlapping Errors.
    What should I do to incorporate these Z-fields?
    I have heard of Screen-exits but never worked on the same. Would appreciate if someone guides me as to what needs to be done.
    Thanks for your valuable time and suggestions.
    Regards,
    Rajesh

    Hi Rajesh,
    I am working ECC 6.0
    We had the same requirement but for Additional Data B in header and item
    For this
    (1) Got the access key
    (2) applied access keys
    (3) In the additonal Data B screens/Program SAPMV45A imported Z fields to the screen in Graphical painter,saved and activated after writing necessary PBO/PAI modules and the codes in 8309 and 8310 screens
    Please can you tell more on the "Screen Overlapping Errors"
    Maybe we can can work out the error.....
    Regards
    Byju

  • Add Custom field to standard screen with table control

    Hello,
    I need to add two custom fields to a standard screen in CAT2 transaction(not using any screen exit).I will be given SSCR key.The standard screen (screen no. 2100) only has a table control.
    How can I add the custom field such that it appears as a field on the screen when CAT2 transaction is opened.
    Do i need to write any code?
    I'm new to ABAP so could you please give a detailed explanation.
    Also, do i need to change the 'fixed columns' field in the table control?
    Regards,
    Monica.

    hi,
    1) find the screen
    2) add new fields to the screen
    3) program PBO and PAI
    regards,
    Wojciech

  • Currency field on selection screen

    Dear All ,
    I am new to BI . I have to give currency field on the selection screen so that user will enter the currency in which he wants to see the report . I have given the currency on selection screen but once he clicks on the button to see what values can be entered it shows only 3 currencies which are used in infoprovider of that query .But I have to show all the currencies available in R/3 . In my R/3 system I have 195 currencies maintained and I have transferd that to BW also .
    To get the things as per the requirement I have created one variable on Currency Dimension and put it in Filter so  that it will come on selectoin screen But still it shows only 3 currency . How to get all the currency existsing in BW or in turn R/3 .

    Hi,
    what you have done is filter the query on record posted with the selected currency.
    It seems that you have records only with 3 currencies in your provider.
    I think what the user wants is to convert the result in the currency he chooses.
    In your query, open the properties on one of your KF.
    On the bottom, choose a currency conversion key.
    You will need to have created a translation key in BW (tx RRC1, rrc2, rrc3) with a target currency selectable. Check in RRC3 the available translation keys.
    Ask your user with which exchange rate type he wants to convert the figures.
    By selecting a suitable translation key, you should be able to mark the variable entry so that the user will choose the target currency.
    hope this helps,
    Olivier.
    Message was edited by:
            Olivier Cora

  • Group currency field in overview screen

    Hi,
    My client wants Group currency field in document overview screen at the posing in addition to company code currency. May i know how to insert this field in overview screen.
    Thanks & Regards
    Sunitha.

    it is closed

  • How to add field to standard screen of PNP

    hello masters, tell me one thing:
    - it is possible to add a field that isn't part of PNP logical database to the standard screen PNP.
    Could someone help me?
    regards and thanks in advance
    Mário

    Hi Mario,
    I don't know anything about SAP HCM, but: If you work with SE80, you can see the logical database in the object tree. Right-mouse-click to copy the logical database to custom name. Modify as you need. Use.
    Regards,
    Clemens
    P.S.: Before I tried I was always afraid of logical databases.Copying is a lot easier than expected.

  • Adding search help (F4) for a screen field in standard screen of VA02

    Dear Gurus,
    I need to add a Search Help (F4) to a Standard Screen Field VBAK-VSNMR_V in the standard Screen of VA01/Va02.....Can anyone please guide me how it can be done.
    Regards
    Sajid
    Edited by: shaik sajid on Feb 2, 2009 8:38 AM

    Hi shaik,
    Refer to the following useful link:
    Search help enhancement in VA01
    Hope this will help you...

  • CRM - change the selection fields in standard extractor

    Hello everyone!
      I would like to change the selection parameters for the DataSources 0CRM_SRV_PROCESS_H and 0CRM_SRV_CONTRACT_H in order to include the field CHANGED_AT. However, in the DataSource definition this field appears grayed out (even in process mode).
      Is there any way I could change this?
      If not, I was thinking about appending a custom field with the the same information and include this in the selection criteria. Would this work?
      If not, could I create a generic DataSource whose function module would internally call the standard DataSource’s own FM with the standard selection criteria and then filter it out  further with my own criterion?
      Performance is not really an issue here.
    Thanks in advance for any input on this!
    Best Regards,
    Luís Andrade.

    Hi,
    >
    scoy123 wrote:
    > I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
    Refer:-
    CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(20) c_comment.
    PARAMETERS : p_matnr TYPE matnr.
    SELECTION-SCREEN END OF LINE.
    Hope this helps you.
    Regards,
    Tarun

  • How to identify the change in the field of a screen

    Hello,
    In a program , i have a screen 100 with some PBO logic and PAI. sample of PAI code
    chain:
    structure-A,
    structure-*,
    module check_mandatory_fields
    module return: ( this will set screen to 0 and then leave statement)
    endchain
    in one of the subroutines we have
    if sy-batch is initial
    call screen 102.
    else
    endif.
    perform ...
    perform ...
    The issue is for some records the processing goes to the PAI of the screen and then returns to the calling program correctly, However few cases it never enters the PAI, there by goes to the main routine which calls this FM.
    Questions
    1. How do I identify there is a change in the structure-A or Structure-B values. Beacuse if check the values are the same.
    2. How do i force it to always enter the PAI irrespective of the change.
    Thanks and regards,
    Shylaja

    Hello Siva,
    Thanks for the reply.
    Currently the issue there is no change in any of the fields. I think thsi is the reason why the PAI is not called. Only in the PAI we have set screen to 0 and leave.
    Without any change in the screen elements how do i force it to enter the PAI
    or
    when i call a screen statement as Call 102, how do i ensure that it returns to the call routine back irrespective of the PAI being executed.
    thanks and regards,
    Shylaja

  • VL10A -  adding selection field in standard screen

    I have added two selection fields in General data tab like "Original Delivery date & Latest Delivery date".
    In Resulting report Layout all data is displayed except these two new columns ("Original Delivery date & Latest Delivery date"). Please guide me where should I change the code to get the data in these two new columns. Any help is highly appreciated.
    thanks.
    Sunil

    Hi shaik,
    Refer to the following useful link:
    Search help enhancement in VA01
    Hope this will help you...

  • Translation for fields on Standard Screen ( Added Field via Extensibility Explorer )

    Hi Experts,
    I have added two fields in a Standard Quick create and added an Embedded Component in a Standard Thing Inspector.
    Issue is client wants that field's labels to be multilingual now as i am not able to download the translation file(xlif) into local machine how would i achieve this?
    and i m not even able to translate the HEADER of the TAB which i attached as EC in a standard TI.
    It would be great ig any one can show some pointers or workaround...
    Regards,
    Dhruvin

    Hi Horst,
    I have created Code List Data Type in SDK and have around 100 Code values and each to be maintained into 3 lang FR, ES, IT for descriptions.
    XLIFF file is XML in coding and I have my values and translations ready in Excel file.
    Any way to quickly get the translations from Excel into XLIFF file easily OR any shortcut in SDK that I do not have to manually keep on copy-paste each translation as target tag in this XML code of XLIFF file.
    Even tools does not seems to be user friendly. Please advice with method OR tool to complete this.
    Alim

  • Custom module pool + Amount field decimals display same as standard screen display

    Hi All,
    Requirement: A custom module program screen field has to be designed which displays decimal values of amount fields same as amount fields in standard screen.
    Standard screen behavior: If the standard screen fields are observed, they refer to data elements WRBTR or AZSOL_F05A (transactions FB50/FB03/FB01). However, number of decimal places that are visible on screen are dependent on the currency that is provided.
    Both the data elements have 2 decimal places.
    For currency USD two decimal places are displayed - in TCURX - decimal places are two.
    For currency JPY or CLP - zero decimal places are displayed  - in TCURX - decimal places are zero.
    i.e., even though the screen field refers to data element or domain that has the characteristic to show 2 decimal places, based on currency, decimal places are adjusted.
    I would like to know how this is happening on standard screen fields.
    Solution Required for: How to make the custom screen amounts to display same number of decimal places as standard screen amount fields.
    P.S: Before posting the query here, research has been done in SDN and other places. It has been identified that quantity fields adjustments are discussed. However for amount field even though discussed earlier, did not reach a conclusion.
    I would like to get a solution for this one.
    Thanks in advance.
    Goutham.

    Thank you all for taking time to take a look at this query.
    This issue has been resolved.
    Resolution: If the standard transactions (FI transactions in specific) are observed, whenever there is a field that displays amount value, there will be a corresponding field (may not be beside the amount field, somewhere on the screen or in the same sequence of screens) where the currency key value would be entered.
    For instance, if you look at FB50 - there is field on top for the user to input currency key value (like USD or CLP or INR).
    When any amount field is declared - this currency key field is provided as the reference field in the screen attributes of the amount field.
    In short, in the custom module pool program, provide a field that holds currency key value and use this field as reference field for the amount fields.
    Do repond to this thread if the resolution is not clear.
    Thank you all once again.
    Goutham.

  • Currency field on a selection screen of type 'DMBTR'.

    Hello ABAPers,
          Could you please tell me how to do it?
           I have a currency field on a selection screen of type 'DMBTR'.
           When i input and press the enter key ,i want the value to be displayed in the following style.
              1. CURRENCY     EQ    'JPY'
                    EX:
                          Value before pressing EnterKey =   123456 
                          Value after pressing   EnterKey =    123,456
                      i.c  the value should be displayed without decimal point
            2. CURRENCY      NE    'JPY'
                    EX:
                          Value before pressing EnterKey =   123456 
                          Value after pressing   EnterKey =    123,456.00
                      i.c  the value should be displayed with decimal point
          Note:The above trick has already been done on a standard dynpro screen of Tr.Code FB60 and Field 'Amount'.
    <removed_by_moderator>
    Thanks and Regards,
    Mohan
    Edited by: Govindasamy Mohan on Oct 8, 2009 6:22 PM
    Edited by: Julius Bussche on Oct 9, 2009 1:36 PM

    Hi ABAP Lover,
       Thanks a lot for your reply.
       I had the same idea as yours like using data type 'P'.
      But, the problem is  that there is only one currency field on the screen .There is also a field of 'Company Code'.
    Both fields are mandatory .
    Hence,the requirement is  to convert the  currency value to the currency of the company code which is input .
    The conversion  should yield the following output on the screen after pressing the enter button.
    1. When currency EQ  'JPY' ,  the value should be displayed without decimal point
      2.When currency NE  'JPY' ,  the value should be displayed with decimal point
    I am very sorry for not explaining you clearly in my first posting.
    Thanks and Regards,
    Mohan

Maybe you are looking for