Changes in custom infotypes not captured in badi 'HRPAD00INFTY'

Hi
I have created a custom infotype 9038 and my requirement is, any changes in the infotype have to be logged in to a custom table. Any changes in standard infotypes are getting captured in badi 'HRPAD00INFTY' - method 'IN_UPDATE' and i am able too update my custom table. But changes in custom infotype 9038 is not triggering the badi 'HRPAD00INFTY'.
Could any body suggest which tables should be maintained to trigger the badi or do we need to do any configuration using SPRO?
Thanks and regards
Badri

I created the interface which is running successfully.
Now i did some changes in target table(data base level).
I reversed the updated table in model section. Till here its ok
The table which is updated in the model section is not automatically updated in the interface.
I have to drop the existed datastore in the interface and and re do the entire process of bringing the updated datastore, mapping,etc..
Please tell the any alternate way.
Regards
suresh

Similar Messages

Table changes in database are not captured in ODI model level

Hi All,
Can any one help me how to fix the bug in ODI.
Table changes in database are not captured in ODI model level.
Thanks in advance

I created the interface which is running successfully.
Now i did some changes in target table(data base level).
I reversed the updated table in model section. Till here its ok
The table which is updated in the model section is not automatically updated in the interface.
I have to drop the existed datastore in the interface and and re do the entire process of bringing the updated datastore, mapping,etc..
Please tell the any alternate way.
Regards
suresh

LOgged Changes in Customer infotype

Dear All,
We have built a custom infotype for holding the bonus data. Some infotype data is stored in a custom table apart from Infotype table. We need to report/ log the changes to the data that is stored in the custom table. I am unable to find out how this can be achieved in table T585A, b or C.
Thanks in advance.
Regards,
Lakshmi

Hi Ram Manohar,
Thanks for your quick response. But the requirement is to report the changes in the infotype using the standard transaction S_AHR_61016380.
I have done the configuration updations in Table T585A, B & C but the data which is in custom table is not getting reported during running the log report.
Can you pls let me know how to go about this.
Regards,
Lakshmi

Custom Infotype not displaying locked records in the list screen (3000)

I have a custom infotype (9xxx) that will not display the locked records (locked indicator (sprps) is set to X) in the list screen (3000) in PA20 and PA30.
Any ideas on what may be causing the records to not display in the list screen?
Thanks,
Ted

Hi,
for creating both employee and appliciant infotype you must check 'Both' in PM01 IT tab.
Regards.

Ship-to address changes on customer master not updating orders

We have recently noticed that ship-to address changes on the customer master made with XD02 no longer show up on existing standard orders. Similar changes to the sold-to addresses do show up but no tthe ship-to addresses. Does anyone know how we can resolve this problem?

hi jeff,
the adresses of a partner is
- with reference to the master-data ( if unchanges in the Order )
- of copied in the order and then changed and saved onlyy for the order.
in the first case, a change of the main data will effect a change in the order.
in the second case, the change of the main data will not change the order, data - they are separate.
you can see this in se16 / table vbpa.
look at the adressnumber.
Adressnumbers of 9++++ are of the 2nd - manual type.
I guess, in the ship to partner, there is done a manual change in the order.
in solt to data normally you don't need such a change. therfor the sold-to partner will get the changes of masterdata -- the ship to partner has manual adress of the orden.
hans

Custom Infotype not visible in Unit Testing Client

I created Infotype in client 110.I can see IT 9000 in Development client 110.But It is not in the client 120 which is Unit test client.I think Infotypes are client independent....Then why can not I see in client 120.

Hi,
I guess you are refering to the client of the same server....
Since the infotypes are not client independent , you have to go to transaction
SCC1 of unit testing client and copy both customizing and workbench request.
After this you can view the infotype.
Have Fun!!
Ira!!

Custom fields not updaing from BADI implmentaion MB_BAPI_GOODSMVT_CREATE

Dear All,
I am using BAPI_GOODSMVT_CREATE for creating GRN.For some custom fields in append structure of MSEG( Material document ), i have implemented BADI MB_BAPI_GOODSMVT_CREATE. PAssing custom fields in Extension of BAPI...
But still values are not getting reflected in Material Document.
Please suggest me , if i am missing any step.
regards,
subhash karidhal

Hi
I have added key fields BLNR(document no) Itemno and custom zfieldsv in MSEG into my new BAPI structure ZMSEG_BAPI.
Now i am trying to pass values to those zfields using VALUEPART1 and update the MSEG table using BADI method EXTENSIONIN_TO_MATDOC
since I am creating document using BAPI_GOODSMVT_CREATE i will not have key field values of document number and item no to pass in Valuepart1 field.
Can you pls confirm should i have to pass blank valuesfor key field in valuepart1. just wondering how the key fields n BAPI structure will related with MSEG Table.
Regard
Chandra
Edited by: princeck on Sep 26, 2011 3:17 AM

Change log data is NOT captured for PO screen exit fields

Hi,
We created a new tab at item level for PO Screen(ME21N) for the purpose of STOs(Document Type UB) & created 3 New fields in that new tab through Screen Exit( SAPMM06E, SAPLXM06 0111 ).
When we are entering data in those 3 new fields while creating new STOs, those data are captured in EKPO table.
When we are changing the OLD STOs for those 3 new fileds, data is modifying in EKPO table. But changes are NOT inserted in CDHDR and CDPOS table for those 3 new fields.
<b>Please help us to track the changes in those 3 new field data changes for old STOs.</b>
Please let me know if you need any further clarification regarding this.
Thanks & Regards,
Mani.

Hai Naimesh Patel,
      Thanks for your promptly reply.
      Now My issue has been resolved successfully with your help.
      I rewarded Points for your reply.
Thanks & Regards,
Mani.

Changes to custom VO not reflecting

Hello All,
I created a new VO which extends standard. I did a jpximport. First time it worked. But now when I make changes to the VO files, the changes, query and new attributes, are not reflecting on the OA page. The page is picking the old version. Saw the details through About Page. Apache was bounced a couple of times still no use.
Can anybody tell me if I'm missing out anything here ?
Thanks.

You can also use functional administrator responsibility.
--Shiv

Custom screen not displaying using BADI ME_GUI_PO_CUST

Hello Experts,
I was working on BAD ME_GUI_PO_CUST to add custom subscreen on header
I have created a subscreen ZNRD_SAPMEGUI_PO with number 9999.
I have created implementation of ME_GUI_PO_CUST as ZME_GUI_PO_CUST.
I have added screen details to the BADI.as follows
CALLPROGRAM = SAPLMEGUI.
Scr No = 1102
Subscreen area = TABSTRIPCONTROL2SUB
Program called = ZNRD_SAPMEGUI_PO
Scr no = 9999.
Now to the method SUBSCRIBE to the implemented BADI ZME_GUI_PO_CUST
I have wriiten the following codes.
method if_ex_me_gui_po_cust~subscribe.
data: ls_subscriber like line of re_subscribers.
if sy-tcode eq ' ME21N' or sy-tcode eq 'ME22N' or sy-tcode eq 'ME23N'.
check im_application = 'PO'.
check im_element = 'HEADER'.
* CLEAR re_subscribers[].
ls_subscriber-name = 'ZNRD_SAPMEGUI_PO'.
ls_subscriber-dynpro = '9999'.
ls_subscriber-program = 'SAPLMEGUI'.
*ls_subscriber-struct_name = 'MEPO_SUBSCRIBERS'.
ls_subscriber-label = 'Customer Data'.
ls_subscriber-position = 10.
ls_subscriber-height = 7.
append ls_subscriber to re_subscribers.
endif.
endmethod.
BADI is active
Now when irun ME21N i dont see the additional custom tab on header coming up.
Please guide will be appreciated.
Regards,
Ranjith

Hi
I have been through the documentation friends still I am unable to go ahead thats the I am seeking your help.
Please guide.
Shailaja could you please explain why do i need to use the user-exit MM06E005 when I am using the BADI.
Regards,
Ranjith N

Custom Infotype for Org Management

Hi Experts,
I Iam trying to create custom infotype to capture some infomation on an Org Management custom object and I am not sure if I can do this through PM01 because this is neither employee or applicant info but custom object info. Any idea on how to do this?

Hi,
For creating OM custom infotype you should start with transaction SE11. PM01 is only for employee and applicant IT.
Go to SE11Create structure Ex:HRI9009 Create all necessary datatypes. (fields for your IT).
Then go to PPCI enter IT name and number. then maintain Table T77I here maintain time constraint for your IT.
If you still have doubts get back to me.
Thanks and Regards,
Shilpa

Adding Standard Infotype fields to Custom Infotype

Hi,
I have a Requirement where I've created a Custom Infotype. Now, client needs to add Standard KOSTL and Email Address fileds to it. Whenever, someone tries to create / change this Custom Infotype for any Employee, the Pernr's KOSTL and Email Address should get populated automatically as in Standard Infotypes 0001 and 0105.
Please guide me, how to achieve this functionality.
Regards,
Hems.

Hi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems.

Change Pointers not being created for HR-PA Custom Infotype

Problem Description:
We have a custom Infotype in SAP to store the data for contingent employee - Infotype 9001. Change pointers is
turned on. We are running the program RBDMIDOC to send changes to Oracle IDM using message HRMD_A. The change
detected for all infotypes except 9001. For 9001, the change pointer is not created.
The following are the current configuration details:
IDOC Extension Created to Idoc type HRMD_A07 (ZHR_EXT)
custom segment zhr_seg
Change pointers are switched on.
Change pointers switched on for message Type HRMD_A.
IDOC configuration created for Port / Process code etc.
Maintenance of view T777D - Added ZHR_SEG.
If I add the segment ZHR_SEG as a 2nd segment to Infotype 0000, I dont get a syntax error. But the changes for Infotype 9001 are not picked up.
If I add the segment ZHR_SEG as a segment to Infotype 9001, I get a syntax error - check EDI: Syntax error in IDoc (mandatory segment missing) below.
EDI: Syntax error in IDoc (mandatory segment missing)
Message no. E0072
Diagnosis
The segment ZHR9001 has the attribute 'Mandatory' in the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
Procedure
Please check the IDoc or the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT).

Were you able to resolve the issue?
If yes, could you please share what was done to resolve it.
Your help will be greatly appreciated.

Custom Infotypes and Change History

HR Gurus,
I am being told that with custom infotypes, we can not track change history.
THe scenario I have is that I need to be ableto capture Address Changes (Address Line 1, Address Line 2, City, State and Zip) and send a Delta for the changed address.
In my unique situation, I have been told that if Address Line 2 is deleted, than the change histiry can not capture the fact that it was deleted and all change history regarding its prior existnace will be deleted if the Address Line2 is removed.
I am not entirely sure=, but I wanted to ask you guys anyway if I woukd be able to track Change history.
-Feroz

Hi Feroz,
Do not believe everything you hear. You can view changed and deleted information from custom infotypes and fields.
First, I am not sure why you need a custom infotype for addresses when IT0006 is available to you. You can more easily create a custom subtype if the supplied ones do not meet your needs.
But for any PA infotype including custom infotypes, you can use the Logged Changes to infotype Data report (RPUAUD00). You have to set up the infotype to be logged in the IMG: Personnel Management --> Personnel Administration --> Tools --> Revision --> Set Up Change Document. In the first section, you list the infotypes you want to track changes for including your custom infotype. In the second step you list the fields you want to track. "*" means any change to any field. And in the third step you indicate whether the information is kept as a long term or short term document.
When you run the report, you can enter the infotype and period you want and the first list will be all changes to that infotype. Select one to view the details and you will see each field listed with the original data and the new data. If a field is deleted, it will appear blank in the new area, but you can still see the old entry in the previous data column.
Also, if an individual deletes a entry in an infotype by using Copy and enters in a new start date, the old record will be delimited, but still be available for viewing. Also, every infotype records who made changes and the date of the change.
Paul

Change layout of Adhoc query output list for Custom infotype

Hi All,
The fields in the Infoset query output on a custom infotype are aligned with the fields u2018payment typeu2019 and u2018amountu2019 appearing repeatedly(in columns) as declared in the Infotype and the output will be a long horizontal list.
Instead, the requirement is that the output list should show vertically so that If I choose u2018Payment Typeu2019 and u2018Amountu2019 as output fields, it will show a long vertical list as in the case of a standard infotype (IT0008).
Also, this way enables user to use Payment Type as a selection criteria so as to just pulling the needed payment type. When we use IT0008 in the infoset it works fine but in custom IT it does not work.
Any pointers/suggestions on how we can achieve this would be helpful.

Hi yu liang,
You can find vendor list having Vendor No. & without showing total liability for every vendor.
after executing the report,
1.You need to select "change layout (ctrl+F8)",
a small window comes, it has two part -> column content & hidden fields.
then u select "Vendor" from hidden field & move it to column content.
2. at column content there is a column named "Total". u need to remove check for your column name "amount".
now select "copy" button or enter. u will find the req. report.
u can save it also by ur name.
hope its helpful to u.......
plz, reward points as a way of thanks if helpful...

Changes in custom infotypes not captured in badi 'HRPAD00INFTY'

Similar Messages

Maybe you are looking for