Changes in depreciation rate

dear all,
once the depreciation rate is changed & we need to execute the depreciation run & also TC-AFAR to recalculate the depreciation..correct me if i am wrong.After this changes in the dep. amount we need to report in our financial statement also.
Now how to know the effect of changes made during this year.What i mean to say is is there any report or transaction code available which can give the details of changes made to assets with dep rate change.i.e writting up & writting down
Thanks,
shivaji

Hi,
Please check following reports.....
AR15                             Changes to Master Record
S_ALR_87010190         Changes to Asset Master Records
S_ALR_87010191         Changes to Asset Master Records
S_ALR_87011923         Changes to Asset Master Records
S_ALR_87011924         Changes to Asset Master Records
S_ALR_87012037         Changes to Asset Master Records
S_ALR_87012038         Changes to Asset Master Records
S_ALR_87013787         Changes to Asset Master Records
S_ALR_87013788         Changes to Asset Master Records
S_ALR_87101170         Audit
Best Regards,
Madhu

Similar Messages

Change depreciation rate

Hi Eveybody
i want to change depreciation rate.. what is the procedure to change the same...
thanx in advance
sanju

Hi Sanjay
Change of depreciation rate can be in the depreciation key.
This change modifies the settings in the key and affects the particular asset and also assets whereever the key is being used.
So check the impact of changing the key and the rate within.
If assets are already impacted then check reverse using AB08, go to dep key , change the % .
But you might have issues with prior year assets. It is possible that you cannot post because of closed periods.
In any case, check the impact, assets affected, period and FY affected and test
reg
suresh

Depreciation rate change

Hi Asset Master's
As per the leagal requirement client wants to change the depreciation rate from a particular date 13% to 20%. Is it possible? then how to change the depreciation. If we assign new key or change % in old key, system is calculating depreciation right from the begining (Previous values also re-calculating the system). Please suggest me what is the possible solution and scenarios that we have to follow.
Regards
Aakash

Hi Meenakshi
Simply we have to maintain new dep. key and assign or is there any configuration settings. can u please suggest any precautions that we have to be maintained.
Tahnks & regards
Aakash

Repeat depreciation, after changes in depreciation key

Hi Everybody,
Could you please explain the problem - The depreciation was posted till to 5th period. Now I want to change depreciation percentage for one asset from begining of the 1st period, now we are in 6 th period. It is possible to do depreciation run
for one asset from 1st to 5th period?
Thanks for watching Forum.
Regards
partha
[email protected]

You change the depreciation rate for the asset.
Then in the depreciation run put only that asset for which you have changed the depreciation rate, then make a test run to see if you are getting the desired results.
Then you can make the depreciation production run. But in case of production run depreciation will run for all the periods. You cannot run only for that particular asset in production run.
You can make a repeat run for all the assets as you have the comfort that you have verified the depreciation calculated during the test run.
Regards
V.Krishnan
(Assign points if useful)

Change in deprecation rate shift wise

Hi,
can we change the depreciation rate according to shift. Like if my machine is running in 2 shifts then depreciation rate will be 8% and if it is running in three shift then depreciation rate will be 10%.
Request immediate help
Thanks

Hi,
you should have two separate asset classes for your case.
One asset class will have 8% rate and another will have 10% dep rate.
Create all assets/machines those will work for 2 shifts in one asset class and where three shifts operated assets create them in a separate asset class.
With a single asset, how can the system will know about the number of shifts it has been operated???
Or else by default, let the system should calculate 8% rate, and at the end of the month calculate and post unplanned dep with tcode ABAA, if the same machine has worked for more than 2 shifts.
This will help you.
Thanks,
Srinu

Depreciation rate change from a particular date

Dear Guru's
Can any body help me, In my plant machinaries working 2 shifts now it is working only 1 ****.
my client is asking can we change the depriciation rate from a particular date onwards. If we change the depriciation from a particular date what impact will be there, is it will effect old values ?
please suggest me.
Regards
Chandu

Hi
Yes, we can change depreciation rate from a particular period/ year onwards.
For that you have to do configuration in Multilevel method ( T. Code AFAMS ). But you can not keep rate as per date. Suppose, for 2008, you want to maintain rate 210 upto 10 % and from 7th period, rate will be 20%, then
AcqYear     Year         Period      Base Value     Rate        Reduct
2008            1               6                1               10                 -
9999           999            0                  1                20              -
Rajib

I Want to change depreciation rate

Hi
i am in sep'09 and i want to change depreciation rate for few assets from April'09.
what is the procedure ???
thanx in advance
sanju

Please search the forum, there are lots of threads on this.
And please do not post duplicate threads.

How can I change the frame rate of a project in imovie 10?

My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
The goal was to make a freeze frame out of this "spezial" frame.
Unfortunately I could not find this frame in the timeline any more - it's gone.
I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
The only solution I found is to decrease the speed of the clip to let's say 50%.
But is there a better way?
Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
many thanks
Rainer
(from austria)

iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame. This is different from Imovie 9 which could handle 50 fps. However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want. After you have made a freeze frame I think you can switch the clip back to normal speed. I am not aware of a better way in iMovie 10 By the way there is also no facility to export a still of a frame in iMovie.
As a GoPro user I think FCP 10.1 would be the best choice.
Geoff.

I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

Hi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments

Is it possible to change the frame rate of a motion template?

Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
If not in Motion, how else could this been changed?

Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

Change of Exchange rate in VA02

Dear Experts
We have sales order which is having around 5 line item and in that 1st line item alone has been invoiced in January and later items still not invoiced
In the month of February, the invoice for 1st line item has been cancelled , so to avoid exchange rate difference when we create invoice for cancelled invoice, we have maintained exchange rate in Sales order Header details-Accounting tab manually and created invoice successfully with old exchange rate.
Now i want remove the exchange rate in Sales order because it will affect the other line items which has not yet invoiced but when in go to va02-Sales order header details-Accounting -Exchng rate-acct field was grayed out.
Kindly help me out how to remove the exchange rate from sales order header details-Accounting tab or is there any way that it should not effect the line items for which still invoiced has not created
Thanks and regards
Ramarao.pokuri
9010272000

Hi,
Ideally, we should not touch the exchange rate. It should always be automatically determined by the system.
However in this case, the first line item is controlled manually.
For the rest of the line items, please select the relevant condition type on which the exchange rate is effected. Doube click on the condition type. There you can see the exchange rate between various currencies. In this place you can change the exchange rate manually. This will be copied to invoice if the pricing is not redetermined in teh invoice. If there is redetermination of prices in invoice, you may have to do the same thing in invoice also.
Lemme know if you have any doubts.

User exit/BADI for changing the exchage rate type in MIGO

Dear guru's,
Please help me in finding the user exit/BADI to change the exchange rate type in MIGO.
Regards,
Abdul Rahim

did you check this one MB_GOODSMOVEMENT?
also exchange rates needs to be changed at Purchase order level and those will be reflected while creating MIGO.

How to change the pricing rate of Sales Order after delivery is created?

Is it possible to update(change) the pricing rate which belong to a specific condition type, of the "Sales Orders" after corresponding delivery is created ?
number of the Sales Order to be changed is huge. How can I handle this situation ?
immediate replies would be rewarded

Repricing is only possible if your pricing record has a valid from date that is equal to or before the pricing date on the order. Otherwise, your pricing rate change will be applicable only from the begin date of that record.
Assuming that it is allowed by config, you can go to VA02, go to conditions, and then there is small button at the bottom, that says 'Update'. By pressing that, your system will automatically reprice the sales order, provided, as I said, all pre-conditions are met. Once you know that you can do this, then you can adopt any of the technical solutions that Rich had suggested above to do the mass changes.

How Can I change my refresh rate to 75hz for on LCD using 91.47 drivers?

HI,
I use a 19" LCD and have always changed my refresh rate to 75hz to avoid ghosting in games like fifa 06 (60hz causes a nasty ghost on my 8ms panel). I have been using the 81.98 drivers and could create an override to use 75. The new driver will allow me to change the refresh rate to 75, but will not let me use it - I get the message "The custom resolution cannot be added". I have coolbits2 installed. Is there a registry setting that I can add to allow me to change the refresh rate? If not, I'll just go back to the 81.98. I am also using the DVI connection.
Thank you,
* This is on my Sli PC in my sig. *

I know that on my particular LCD monitor, if I go above the recommended rates, then the screen will just go black and won't let me see anything. Usually it displays a message telling me that it cannot display. I think it especially does this with the DVI connection.
You may have tried it allready, but just make sure that in your display properties you have unchecked the option to only display resolutions allowed by the monitor.
You may also want to try and see if it will let you do it with a VGA connection instead of the DVI.
Otherwise, you just may have to go back to the earlier driver.

How can I change the frame rate mode?

Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video has a constant frame rate...

Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 2.00 GiB
Duration                                 : 20mn 13s
Overall bit rate mode                    : Variable
Overall bit rate                         : 14.2 Mbps
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:58:30
©TIM                                     : 00:00:00:00
©TSC                                     : 30
©TSZ                                     : 1
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Format settings, GOP                     : M=3, N=30
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate                                 : 14.0 Mbps
Width                                    : 2 560 pixels
Height                                   : 1 440 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Variable
Frame rate                               : 30.000 fps
Minimum frame rate                       : 30.000 fps
Maximum frame rate                       : 30.030 fps
Standard                                 : PAL
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.127
Stream size                              : 1.98 GiB (99%)
Source stream size                       : 1.98 GiB (99%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
mdhd_Duration                            : 1213733
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate mode                            : Variable
Bit rate                                 : 158 Kbps
Maximum bit rate                         : 254 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 22.8 MiB (1%)
Source stream size                       : 22.8 MiB (1%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
mdhd_Duration                            : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec

Changes in depreciation rate

Similar Messages

Maybe you are looking for