Changes in development system are not excluded

Anyone had this issue in CHARM before ?
we have SLFN - SDCR - SDMJ open for a change.
Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
Business now wants to stop this change and close SLFN.
How can I close/cancel SDMJ ?
When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
Is there a way to force close SDMJ ?
Thank you
Elena

>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport.  Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing.  The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

Similar Messages

  • Changes in backing bean are not considered for deployment

    hi,
    i'm not sure whether this is a jsf specific issue but..anyway, here's the case: I'm using eclipse ( lomboz) as ide and whenever i change something in my backing bean (let's say add a new method) it is not found after redeployment neither after clean command. after some startups the changes eventually are adopted. this is really annoying as just starting the server takes me half a minute. so if anybody ever had the same or similar problem or has any experience with hot deployment please sent me a clue.
    regards,
    jens

    >
    Elena Ainoulina wrote:
    > Anyone had this issue in CHARM before ?
    >
    > we have SLFN - SDCR - SDMJ open for a change.
    > Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
    > Business now wants to stop this change and close SLFN.
    >
    > How can I close/cancel SDMJ ?
    > When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
    > Is there a way to force close SDMJ ?
    >
    > Thank you
    > Elena
    Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport.  Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing.  The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

  • File Systems are not shown in CCMS Monitoring

    Hi Gurus,
    We have installed all SAP components in Solaris 10 zones including Solution Manager.
    Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
    The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
    Thanks,
    Pj

    Hi,
    You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
    Note 870652 - Installation of SAP in a Solaris 10 zone
    Note 724713 - parameter settings for Solaris 10
    Hope this will solve your problem.
    --Ragu

  • In rz20 all file systems are not coming.

    Hi all.
    I have ccms configuration in local system not in central system menas every system there are own ccms configuration.
    File system In rz20 that all file systems are not coming.
    in os level there are like sapdata1,sapdata2.... & sapreorg but these file system are not coming in rz20.so we are not getting any alert regarding this file systems.
    Kindly suggest how can i fetch all the file system which are available in os level.
    thanks in advance.
    Thanks & regards,
    Laxmid

    Hi Kumar,
    Os -HP Unix
    In *RZ0> SAP CCMS Monitor Templates>Filesystems--->* these below file systems are not coming.Otheres are coming.
    /oracle/RXN/sapdata1
    /oracle/RXN/sapdata2
    /oracle/RXN/sapdata3
    /oracle/RXN/sapdata4
    /oracle/RXN/oraarch
    /oracle/RXN/sapreorg
    & please tell me there is one Lock & unlock is there in front of every node.what is this.
    Thanks & Regards
    Laxmi
    Edited by: laxmid on Feb 7, 2010 9:04 PM

  • Changes made in BOM are not reflected in Configurator.

    Hi all,
    When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
    I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
    I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
    This program has 2 parameters one for folder and the other for Configuration Model Id.
    When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
    We don't have a separate instance for COnfigurator.
    Do i need to do any set up so that my Configuration model is reflected in the LOV?
    Can anyone please help me on this?
    Oracle Apps version: 11.5.10.2
    Configuration software build: 11.5.10.25.43A
    Regards,
    Sreekanth

    Hi Jason,
    Please see my comments below
    Jason said*
    Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
    Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
    Ex:
    When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
    But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
    effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
    Can you please explain this?
    Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
    Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
    Jason said:+
    Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
    a. A Model (PRJ = Project)+
    b. The Model cannot be deleted (Deleted_flag must be '0')+
    c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
    Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
    Regards,
    Sreekanth
    Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

  • Changes to Excel files are not getting updated

    File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected.

    Hi,
    According to your post, my understanding is that changes to Excel files are not getting updated.
    I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
    For more information, you can refe to:
    Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
    If you use PowerPivot, you can refer to:
    Refreshing PowerPivot Data in SharePoint 2013
    If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
    You can refer to:
    PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
    In addition, here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Materialized Views indexed are not excluded when exporting ddl

    Hello,
    When exporting ddl of the schema, through the export function of the gui, if I disabled materialized views from the objects to be exported, then the indexes of materliazied view are not excluded of the final DDL.
    This happens on  Version 4.0.3.16, Build MAIN-16.84

    Hello,
    When exporting ddl of the schema, through the export function of the gui, if I disabled materialized views from the objects to be exported, then the indexes of materliazied view are not excluded of the final DDL.
    This happens on  Version 4.0.3.16, Build MAIN-16.84

  • Changes to my bookmarks are not saved when firefox is restarted. I already tried deleting places.sqlite, but it is still doing this.

    Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.

    Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
    You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Modified changes to ESS DC are not visible

    Hello Experts,
    I have imported the DC and checked out. I have modified essusfam~sap.com by adding a text field and input label. Saved all my changes and tried to deploy the code from the context menu in webdynpro explorer. NWDS prompts for SDM pasword and later I see the deployment sucessfull. But, the changes are not visible. Just want to know if I am missing any steps before deployment. or do I need to follow any more steps.
    I am trying not to use NWDI deployment process
    Thanks,
    Sharath.

    Hi Sharath,
    When building, choose project then right click and select build... from Development Component section.
    Regards,
    Raj

  • Imported object in development system is not changeable

    Hi experts,
    I just transported a RFC from sandbox to development via file transfer. Once imported, the RFC is not modifiable in the development system. Why is that so? The object which are created in developement is changeable but the one transported is not.
    Please guide me here.
    Thanks.
    Regards,
    Thava

    Hi,
    Please make sure that the Object properties "Objects are original objects" , "Objects are modifiable" in SWCV are checked.
    -Rahul

  • Potential & Development Forms are not getting displayed

    Hi Gurus,
    Here goes another problem which I am facing regarding Forms, I created Potential & Developemt forms in Talent Assessment in DEV-100(golden client) & copied it to DEV-300,via SCC1 (another client to which portal is linked), but still the forms are not updated in 300, though 1node & table V_T77TMC_P_V got updated in 300 after i copied the req.
    The complete customization is done in the TR , including the manual transport of the Forms,still they are not getting displayed in 300, kindly help!!!!!!!! its urgent
    Regards
    Bharti Sood

    Hi Bharti Sood,
    It appears that all elements were not transported. Did you go through these customizing tasks in IMG > Talent Management and Talent Development > Talent Assessment:
    - Transport Forms
    - Transport Process Form Assignments
    - Transport Scales
    These elements do not get transported automatically.
    Best regards,
    Luke

  • Changes made in Lightroom are not displayed in Bridge.

    When I make changes to my jpeg or psd files in Lightroom 4.3, these changes are not displayed in Bridge.
    I'v checked the appropriate box in Lightroom's Catalog Settings "Auotmatically write changes to XMP".
    What am I doing that's incorrect?
    Digitalmac.

    With the box <Auotmatically write changes to XMP> checked, it may take a while until Lr "gets around" to writing the changes to xmp.
    To check directly do this: immediately after you made changes to an image (PSD or other) press Ctrl / Cmd + S (letter S on you  keyboard), wait until the progress bar has finished and then check your image in in Bridge.

  • Changes to a Role are not Reflected

    I have created a role with one BSP iView and assigned the role to a user.  When the user logs in he can see that iView.  Then I have added three more BSP iViews to the role.  But these new BSP iViews are not visible to the user.  The user had logged off and logged on again.  I have deleted the role assignment to the user and then reassigned.  Nothing is working.  Can someone tell me what could be the problem?  I will assign points to helpful posts.

    probablly you may not clear the cache, just clear the cache and check it out.
    to clear cache go to system administration -> navigation -> navigation cache.

  • Changes in Crystal reports are not reflecting after publishing

    Dear SDN Mates,
    We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
    Can anyone please help me on this.
    Thanks and Regards
    Arun S

    Hello Prathamesh,
    After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
    This is happening for all reports. Can you please suggest me on this.
    Thanks and regards
    Arun S

  • PP & AE Dynamic link - changes made in AE are not showing up in PP

    Hello,
    I am doing the following:
    1. In Premiere Pro (CC 2014) I select a clip on the timeline --> right-click --> Replace with After Effects composition.
    2. In AE, I am doing some animation of text.
    3. Usually, any changes done in AE, are automatically shown in Premiere + the red line appears which means I have to render the clip.
    4. Once in a while and not vert often, for certain clips, it randomly stops working:
    I am making a change in AE, but the change is not seen in Premiere and the line above the clip doesn't change to red.
    Any idea what might be causing this and how to fix it ?
    Thanks,
    Tal

    Thanks for you responses WC. The changes I made to iPhoto did eventually show up, but it took over an hour. This is really the only 'issue' I've had with my ATV2, but it was extremely frustrating. I tried rebooting the ATV, my computer, and a number of other things, but nothing worked. Eventually I walked away from it, and when I came back everything had updated.

Maybe you are looking for