Changes in Excel cannot be saved when open from SharePoint 2010

Hi,
I use SharePoint 2010 to access my documents library. When I open an Excel spreadsheet and do some changes, save the changes and everything seems to be fine. I close the Excel file and open it again. Surprise! my changes are gone and even though I did this
many times, I got the same result.
There is no versioning and not check out requirement in the Library settings. I do use IE v9.
I'll appreciate any help.
Regards
//Ashraf

Hi Ashraf,
This forum is for Team Foundation Server, I'd like to know whether you use TFS and if you have tried on other files. If you don't use TFS, you can open a new thread in SharePoint forum for a better response.
If you have TFS integrate with SharePoint, then you can use a newer version of IE to have a try, or check on other machines. Also confirm whether your account has the permission to edit the file. Elaborate more details about your scenario if the problem
persists.
Best regards,

Similar Messages

Changes in Excel cannot be saved when open from SharePoint.

Hi,
I use SharePoint to access my documents library. When I open an Excel spreadsheet and do some changes, save the changes and everything seems to be fine. I close the Excel file and open it again. Surprise! my changes are gone. I repeated the same action many
times but I got the same result, no changes saved. I did not get any error message.
There is no versioning and not check out requirement in the Library settings. I do use IE v9.
I'll appreciate any help.
Regards
//Ashraf

Hi Ashraf,
Are you opening that Excel file to make changes in Excel client application or in browser (Excel Web App)? By your question it seems that you are using a browser to make changes and saving the excel file, since you mention you are using IE 9.
If that is the case then please execute the below steps and recheck.
1. Clean cookies in your IE 9 browser.
2. Use other browsers to open the Excel file in Excel Web App and check if same issue occurs.
3. If you are having only Internet Explorer(IE) on your system, you can
reset IE.
4. Try to upload a new document and make changes again to see if the same issue occurs.
Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

Excel datasheet Password Protection not opening in Sharepoint 2010 default browser

Password protection Excel datasheet not opening in SharePoint 2010 library with Use the server default
(Open in the browser) I get a SharePoint Error ‘an unexpected error has occurred ’
If I change in advanced setting to Open in the client application it works fine
What do I need to do In order to have the file open in the default browser?

Excel Services/Excel Web App does not support password protected Excel sheets. Your only option is to open in Excel client.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

HT1941 I have inadvertently changed a file permission setting. When opening Aperture I get the following; Aperture cannot access this library. To use this library make sure it's file permissions are set correctly. I am an old dude new to Mac OS. What up?

I have inadvertently changed a file permission setting. When opening Aperture I get the following; "Aperture cannot access this library. To use this library make sure it's file permissions are set correctly". I am an old dude new to Mac OS. Looked in settings but have no idea how to allow file sharing to myself. I have been using Aperture actively for 6 weeks. I'm the only one using this Mac. What up?

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Cannot find picture when transferring from Aperture to PSE 11

Cannot find picture when transferring from Aperture to PSE 11
I have an older version of PSE and when I transferred a picture from Aperture to PSE9 it would open PSE9 and show the picture.
I set the Preps in Aperture for PSE 11 and the PSE 11 opens but no picture in the box or photo bin or in the top left "open".
I changed the Aperture setting to the PSE Organizer and the same thing happened Organizer open BUT there was no picture to be found.
In Aperture it shows the file being transferred.
I looked in the PSE 11 preps and file but could not find anything.
The fact that it opens the PSE 11 app tells me it is being recognized but the picture (file) is going somewhere else.
Thanks
Greg

Hi Greg
Make sure you are linking to the application in Support Files and not to an alias.

Iphone 4s new handset is damaged when opened from pack

The new iphone4s handset is damanged when opened from pack. The phone was ordered online. What is reson for the same, is it due to lack of quality check.

I suggest you take that up with the carrier that delivered the package. They are responsible for delivery and if it was damaged in delivery, they are responsible. If it doesn't seem the damage occurred because of shipping damage, then contact Apple, describe the problem and they will advise you what to do. Things happen, however, since we are users here just like you we cannot tell you how to handle the situation. I certainly can't tell you the reason it was damaged.

There was a problem sending the command to the program when opening Microsoft Project 2010 files

When opening MS Project 2010 files from the file and print server, I receive "There was a problem sending the command to the program." Copy the same file to my local drive and the file opens fine. This can be repeated by several other
users. Created a simple project file and once the size hit 1 MB, the error appeared. The error appears on all files over 1 MB.
I am a domain admin, so it is not a rights issue. This does not seem to be a network latency issue, the file copies extremely fast.
Any ideas?

This message appears to be caused by Windows Explorer trying to send old-fashioned DDE messages to the Application.
Since MS Project has no "Ignore DDE messages" setting you might want to go change the compatibility settings for WinProj.EXE (and any shortcut to it) to Windows 7 or greater. Hopefully then Windows Explorer will stop trying to send DDE messages.
Another possible culprit is older versions of the WinZip explorer extensions - I would disable them as well.
Good luck,
James.
James Boman - http://www.boman.biz Software Consultant for IPMO - http://www.ipmo.com.au

When opening my Outlook 2010 with new added e-mail account with Exchange Server, I have to click manually on my standard e-mail account for checking mail

When opening my Outlook 2010 with new added e-mail account with Exchange Server supplied by my employer, I have to click manually on my standard e-mail account for checking mail. Do I have to upgrade my Microsoft Office 2010 or how can I make my Outlook
2010 check all my four e-mail accounts without manually click on my accounts?
Sincerely
Ketil Hothorp

Hello Ketil,
Good Day...
Seems to be the Issue is Syncing emails, now I would recommend you to Remove and Add the Account and try and check if the emails are getting synced automatically.
Hope this is with Single User. If it is with Multiple Users then we need to check the permissions assigned.
Regards,
Praveen

"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email

"Internal Error Occurred" appears when .pdf is opened from Outlook 2010 email
I am absolutely pulling out my hair over this one!!
PC/Win 7 64bit/Adobe XI/Office 2010
I have tried Uninstalling and re-installing
I have tried using an adobe software removal tool
I have tried modifying the security settings in reader
I've tried running repair on MS Office
If you open the .pdf from an email directly, it opens Reader with the error "Internal Error Occurred"
If you drag and drop the .pdf onto the desktop, and then open it, it opens.
If you open Adobe Reader FIRST, then open the .pdf from the email, it opens fine.
ONLY when you open a .pdf from an email with Adobe Reader closed (so Outlook is asking AR to open first, and then present the .pdf) is it behaving this way.
Hypothesis: Outlook 2010 does not like to open Adobe Reader.
SO....tell me all of you brilliant geniuses? How do I solve this puzzle and become an end user's hero?
PS: WorkAround - the only work around I have found for this at present, is that the user first opens up Adobe Reader and lets it run in the background. I pinned the shortcut to his task bar to remind him.

I have uninstalled Adobe Acrobat Reader DC and installed Adobe Reader XI and everything works fine. This will be our current fix until a solution is found for the above error

Photos not opening in PS when opened from Bridge. [was:Question]

Photo's not opening in PS when opened from bridge, this has been happening for the last few weeks. I will be working in PS and opening from bridge OK, then suddenly I will open about 6 photo's but they only show the tabs at the top of the screen but no photos. I have to close PS and reopen before they show. Can anyone help it is driving me crazy. Tks

The odds are you chose the logical file rather than the correct file as your external editor:
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-external-edito r/

Small Window when opened from UWL

We are using HCM Form & Processses and our forms is approved by multiple levels
We notice that when forms are opened from Universal worklist, the window to view form appears in a 1 inch box (Impossible to view) This is also specific to certain users.. Most of other users see the form is launched in a window where we can see the content clearly.
Has anyone faced / resolved such issues? What in client machine can control the window size when opened from UWL?

Hello , We have the same issue while opening the form window in UWL, How did you resolve this issue ?

Forms Opening is Very slow when opened from Client PC's.

All,
We are running forms application in 10.1.2.0 application server. We have a peculiar issue of slowness while opening forms from client PC's and not while opening from application server itself.
1) When opening the form from a Windows 7 PC it takes around 25 seconds
2) When opening the form from a Windows XP PC it takes around 15 seconds
3) When opening the form from the application server itself it took less than 3 seconds .
In essence all forms when opened from application server are opening very fast and when opened from client PC's it takes undue time. What might be the reason for the same, can anyone help us and we are pondering over this issue for some time. What are the files of interest to be visited for these kind of issues. We enabled tracing level 5 in JRE and could not find any thing fishy over it.
Request application server and forms experts to participate and help us to resolve.
Thanks in advance.

Even if it's a generic issue you need to break it down in smaller parts to actually get a clue what's causing your problem. By now there is nothing we can rule out as the only thing we know is that it's slow on the client PC's.
Building a small dummy form as suggested by Andreas is a good starting point. If the performance is also bad for a small form with one block you can rule out that it has anything to do with forms and it's caused by e.g. your network. If the small form performs well rebuild one of your forms step by step and do tests for each step. By that you should find what's causing troubles.
What you can also take a look at are network roundtrips: You have to set the console window of your forms, and enable networkstats in your formsweb.cfg
networkStats=yesA typical cause for (unnecessary) roundtrips are e.g. calls to the synchronize built in or timers. If you are using Javabeans you should also take a look at them. If you are looking at your network traffic wireshark is your friend ;).
cheers

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

Separator page prints out with wrong name when printing from Outlook 2010

Working with Windows 7 Enterprise, Outlook 2010. We've set up our desk printers to print a separator page with the user's name, as several people use the same printers in our building. Printing from IE, Word, etc. all work fine, and it'll print
out the correct username on the separator page.
When anyone attempts to print an Outlook email, it instead prints out my username. We've found that it doesn't happen if they click on the "quick print" button, but it happens every time if they do "file > Print" or Ctrl+P.

Hi
As per the information and details provided by you that separator page prints out with wrong name when printing from Outlook 2010, please follow these steps: -
To create a custom separator page file, use a text editor such as
Notepad. On the very first line, type one single character, and then press
Enter. The character on this line defines the character used as an escape character. For example, the following list assumes that this character is the at sign (@).
Enter the escape codes for the functions you want, and then save the file with an .sep extension in the Windows System32 subfolder.
In the Print Manager, select the printer that you want to use the separator page file with, and then click
Choose Properties on the Printer menu.
Click
Details, specify the name of the desired separator page file in the
Separator File box, and then click OK.
Note:
Put the custom separator page file in one of the following locations:
In the %Windir%System32 folder.
In a folder whose path contains a SepFiles folder. For example:
Drive:\Folder\SepFiles\Subfolder
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Error -50. Changes is iTunes cannot be saved.

I keep getting "The iTunes Library file cannot be saved. An unknown error occured (-50)."
Any change I make in iTunes, like changing the name of a playlist, does not stick upon restarting the application.
Is there a corrupt file somewhere. How do I fix this to be able to make changes to iTunes? I'm unable to download from the store also.
Not to Apple- A User Forum is not support.

I been having the 'Unknown Error -50' problem ever since installing the latest (V7.3) update. I wonder if I can roll back to 7.2? When 7.3 started up it said it was making changes to the library. Since it is an 'Unknown' error it is my guess the problem is with iTunes itself.
 20" Intel iMac + Cinema Display + Sony HDR-HC7 HD camera Mac OS X (10.4.10) All tools, no talent!

Changes in Excel cannot be saved when open from SharePoint 2010

Similar Messages

Maybe you are looking for