Changes in functional and technical level on upgrading from SAP ECC 5.0 to ECC 6
Hi Friends,
Need help with the below mentioned questions
What will be the changes in Functional level while upgrading for ecc 5.0 to ecc 6.0?
What will be the changes in Technical level both Abap and Basis?
What will be the changes in Server Hardware level in Upgrading of Servers (Solution Manger,IDES,Dev Server,Prod Server)?
What is change in SAP License level?
Total cost of Project development and Support .
please help me as I need to answer some body .
Thanks in Advance
It seems that you have a combined upgrade - ABAP + Java in your system - is that right? If yes, did you start the Java upgrade in parallel?
Markus
Similar Messages
-
Upgrade from SAP 4.7 EE to ECC 6 while working with CRM 4.0
Hi All,
Presently we are using R/3 version 4.7 EE with CRM 4.0 and now we are planning to upgrade R/3 4.7 to ECC.6.0. My question is, are there any problems working on CRM 4.0 with ECC 6.0 and what are the limitation we face when we work on CRM 4.0 with ECC 6.0 ?. Please provide some inputs on this ASAP.
Thanks in advance,
J M.Hi,
There is no problem to work on CRM 4.0 with ECC 6.0.
I am using from long time CRM 4.0 with ECC6.0
BR,
Darshan.. -
Want to learn functional and technical requirements for UCM
Hi,
I'm very new to UCM. Can someone please send meplease tell me where to find functional and technical requirements for UCM from user and implementation perspective.
Thanks Very Much,
Andycan you be a little more specific?
Technical info can be found in the documentation. Requirements and so on.
What exactly do you expact from functional requirements ?
Edited by: Yannick Ongena on Nov 30, 2011 5:50 AM -
Overall equipment efficency ..functional and technical
Hi
friends
doing a module pool for overall equipment effiency
as iam new in p.m module i need some functional help.
but have to create a z tables for it .
my criteria is
<b>header --</b>equipment
cost center
plant
functional location
<b>detail table</b>.
equipment
from date
from time
to dta
to time
operations--production,
maintaince
ideal
batch
material
reasons
Planned production quantity
equipment
month/hours
god hrs
planned production hrs
reason no
reason code
std hrs/min.
have to create table but iam stuck in normaliazation what should be
keys on and indexes on as there is no functional guy avalab1e here
i have to do it and this module pool should allow to modify delete
and change that can be done but ..on one screen this 2 table control
i have to display .
so pls give the suggestion for functional and technical
regards
answers will be awarded pointsHi,
See the Views VIAUFKS and VIAUF_AFVC ,
you will get all the fields related to PM module
See the fields and the data elemetns and create the tables and use them in the Table controls and design your screens and the code.
see the info on Table controls:
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
reward if useful
regards,
ANJI -
Functional and technical spects, and tickets issues.
Dear friends,
if any one know abt functional and technical spects documents , ple forward my mail
[email protected]
and also , how end users issue tickets. we can use any third party tools for getting tools and any levels will be there , how tickets will come to u.
ple clarify
Thanking u
suneelPlease describe your experience with BEx (Business Explorer)
A) Rate your level of experience with BEx and the rationale for youre self-rating
B) How many queries have you developed? :
C) How many reports have you written?
D) How many workbooks have you developed?
E) Experience with jump targets (OLTP, use jump target)
F) Describe experience with BW-compatible ETL tools (e.g. Ascential)
2) Describe your experience with 3rd party report tools (Crystal Decisions, Business Objects a plus)
3) Describe your experience with the design and implementation of standard & custom InfoCubes.
1. How many InfoCubes have you implemented from start to end by yourself (not with a team)?
2. Of these Cubes, how many characteristics (including attributes) did the largest one have.
3. How much customization was done on the InfoCubes have you implemented?
4) Describe your experience with requirements definition/gathering.
5) What experience have you had creating Functional and Technical specifications?
6) Describe any testing experience you have?
7) Describe your experience with BW extractors
1. How many standard BW extractors have you implemented?
2. How many custom BW extractors have you implemented?
8) Describe how you have used Excel as a compliment to BEx
A) Describe your level of expertise and the rationale for your self-rating (experience with macros, pivot tables and formatting)
9) Describe experience with ABAP
10) Describe any hands on experience with ASAP Methodology. -
Functional and technical design for reports
Hello BW gurus,
I am responsible for creating/developing few reports in Prod Planning and Inventory Mgmt.
Is there a template for the Functional Design and Technical Design for the reports?
How do I go about making the functional and technical design?
Thanksjackofalltrades,
If you could give us the stage of the report -
1. whether you are reporting from existing cubes and this report would be an additional one on a existing cube or
2. The report has to be designed from the ground up ...
Depending on the same - the entire lifecycle will be different and also whether the query is to be shown on the web or through excel will be helpful.
You could have a look at ASAP Templates in the meanwhile.
Re: ASAP Methodology
Arun -
Pls send me Functional and Technical Specs
Hi Guys,
I want to know how Functional and Technical Specs prepared.
Can anybody pls send me both the specs to my mail id.
I will be thankful to one who sends me both the specs.
My mail id is: <removed>
I expect u send me soon.
Regards,
Divya SHi Divya
Go through this links....
Functional specs - tchnical specs
Contents of functional specs for BW project
hope it helps...
Regards
Tarun. -
RE: BI functional and Technical Specification
Hi,
Can anybody share BI Functional and Technical Specification for SAP R/3 data extraction for modules FI/CO, SD, MM, WM/MM.
Thanks.Hi Hitesh
Bi Functional Specification is like this where you get the details of what is the report they are looking for and what does that do in detail explanation from the key user of that particular area.
and also you will receive an document saying that the particular tables and fields ...
After receiving that then you will be starting an work by preparing an Design document of what are the objects you are going to use in the system and what type of Data Source your are using and Targets etc.. This is nothing but an Technical Specification... and this also contains what type of the load is it...
Hope this helps you..
Thanks -
CRM Functional and Technical Overview
Hi All,
I have not explored CRM completely.
Want to learn functional and technical aspects of CRM properly.
Please suggest some links for good and effective recordings regarding CRM functional and tecnical aspects for the better understanding of beginners.
Thanks & regards,
AbhiHi,
There are lots of courses which would help you understand CRM.
CR-10
CR-100
CR-300
CR-500
CR-600
CR-700
You can check the following link for info on these courses
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000072627&
You can also refer to
http://help.sap.com/saphelp_crm70/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
which contains rich amount of information about SAP CRM.
Thanks,
Abishek
Edited by: Abishek Kumar Thiagarajan on Jun 9, 2009 5:06 PM -
InfoSpoke Functional and Technical Specs
Hi all,
I would be interested in seeing a good outline for both a functional and technical specification for an INFOSPOKE. If you have an actual example of either of these specifications it would be a big help. I need it specifically for an INFOSPOKE. I appreciate your help.
Thank you,
DaveHi David,
go thru these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb462104-0701-0010-07ae-d866630e0989
https://websmp209.sap-ag.de/~sapidb/011000358700002201112003
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/f4/5c983cff567f5de10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Regards,
Archna -
Functional and Technical Specification Doc
Hi Friends,
Can anybody send me sample Functional and Technical Specification Documents for SAP CRM/ECC.
Thanks and Regards,
SurajHi Suraj,
Look at <a href="http://help.sap.com/bp_crmv150/CRM_DE/index.htm">Best Practices</a> , maybe it helps.
Regards.
Manuel -
Functional and technical requirements for CFTE
Hi all,
I have to prepare a pre sales meeting. the potential customer needs to know the functional and technical requirements to implement Cloud for travel and the technical limit. I found some information in the document SAP_OD_TECHNICAL. Does someone has further information ?
Thanks in advance for your help,
best regards,
lucie POLESEPlease refer to the Master Guide and Security Guide located at the link below (you have to select the latest release once you go to the page):
https://help.sap.com/travel-od -
Functionality and Technical configuration
Hi....
If any one have SAP QM functionality and Technical configuration book-late then provide to me
thanks in advance
BhaveshHi Gurus
Thanks for good reply because this will help for all QM leaders....
Bhavesh -
Technical upgrade from 4.6C MDMP system to ECC 6.0 using CU & UC approach
Hi SAP Experts,
We are embarking on a project for Technical upgrade from SAP R/3 4.6C MDMP system to ECC 6.0 using the CU & UC approach for our Asian operations (comprising of India, Japan, Taiwan & Singapore).
Please share with me the Best Practices you followed in your projects, checklists, DOs, DONTs, typical problems you encountered and the possible safeguards, any other useful information, etc.
Since very little information is available from Organizations who have used the CU & UC upgrade approach successfully, I am raising this in SDN to share your experiences during the Technical upgrade.
All useful information will be surely awarded with suitable points.
Looking for your invaluable inputs which will be a BIG help for our project.
Best regards,
RajaramHello Rajaram!:
It's a very big project, that you have to do in a lot of steps........
If you want sent me a email with the problems and you want.
Regards,
Alfredo. -
i have a mac and am thinking about upgrading from snowlepard to lion , is it a good idea and hard to adapt to
This is my "About This Mac" ... it shows I have Intel i7 CPU. If you are running SL, you at least have Intel, but would need at least Core2Duo an 2 GB (most people suggest 4 GB) RAM.
If you want to run Lion, remember that the discussions in this forum from last summer when Lion first came out (and since) were highly charged at times. Certain features that vanished or were added caused great heartache for some. Others love Lion, though. And some live with the changes waiting for any fixes they would desire.
Any PPC (PowerPC) applications you depend upon will not work under Lion. Use this page to see what applications will not run: http://roaringapps.com/apps:table
AND
Recall that you can clone your SL to an external disk to keep it safe. Then you can "experiment with" the new OSX (Lion or ML) until you know it works for you while still having your old SL safe in case you need it.
Good luck.
Maybe you are looking for
-
Is there a way to automatically number each response?
Hi - I am creating a marketing request form for my sales team. Is there any way to have these responses automatically numbered? This way each request has a number associated to it? Thank you, Linda
-
Tracking emails sent through SAP using Outlook Integration
Hello experts, I have a question regarding Outlook Integration. Can emails through SAP be tracked using SAP? The customer is using Outlook Integration. When an email (containing an invoice for example) is sent through, the email is stored in the user
-
Problems Shared Services:Registered application is not active at the moment
Hi! I have a problem with Hyperion Shared Services (HSS) and Hyperion Performance Socrecard (HPS), my projecto from HPS appears like if not it was registered in HSS. The error is: Registered application is not active at the moment. Please consult you
-
Searching Multiple Exchange Accounts in Outlook 2010
Hi After upgrading to Outlook 2010, one of my users can no longer search multiple exchange accounts. Here is the background. The user is an administrative assistant for 2 partners. She has full permissions against their mailboxes. Their accounts
-
My iPhone 4S won't charge after iOS7 update
I updated to iOS7 yesterday and everything seemed alright until 1 day later. My battery went from 70% something straight to 1% out of nowhere. I left it charging on my wall charger and came back 1-2 hours later and it was still at 1%! I knew somethin