Changes in IMG setting

Hi
How we can display changes made to date if we don't know TR number in IMG ( Release class-charactertics ) ?

If you are asking about CT04 characterstics ,then it is difficult these are clint independent.If some thing else you need to ask your basis guy they will tell you release object and any changes happend certain period.

Similar Messages

An urgent issue about restore IMG setting

Hello , experts
I meet a trouble and hope get help from you.
Acctually I did some change in IMG setting in a SAP system.
The change I did hang under a transport request number. (SE09/SE10)
Now I hope to remove all the change and restore the system to original status, can I do it by some manual on the transport request I created?
Is it possible to restore the IMG setting in SAP system?
If transport request way is not possible, is there other way?
Hoping for your help, thanks a lot

It seems that you have to restore your IMG setting by using your backup. It's the safest and easy way
But it's all depend on your last succesful backup.
ardhian

In which table system change options are set

In which table system change options are set(from transaction se03). I have table logging on but do not know in which table I should look for changes.

Joe,
Below link & sap notes may be useful.
http://www.saptechies.com/how-to-activate-the-img-change-log/
388691 Cross client customization, system change options
184586 - System change option and BW
Thanks
Sushil

IMG setting for REM Planning Table

Hi Gurus,
Can any one throw light on following IMG settings-
Path -
IMG --> Production --> REM --> Planning --> Planning table --> Maintain Row selection --> Reciepts Other version
Relevance of "Other version - in IMG setting for visible rows in planning table".
Planning table output does not change with check or uncheck of version.
Which check or unchecking, planning table is considering all the production versions of the materials maintained.
What is purpose of having a check or uncheck, if system is giving the same result.
Regards,
Srini

Hi Srini,
We create production version to OPTIMIZE the production. We mention the routing and the BOM in the production version. Actually speaking, in the REM scenario we don't even need a planned order. Production order is absolutely not needed. So in the planning table, it shows the production data for all the versions that you have created, irrespective of whether or not you check the indicator. During planning run, the system will take the first production version by default. So in the planning table you can see the optimum production and you can do leveling also, possible through the row selection option in IMG. Hope this sheds a light on your concern.
Regards,
Sreekant.

How do I change the printer setting to print in Black only?

How can I change my printer setting to print in Black only

It depends on your printer as well; my Epson AIO only does color (even when it is black font only) - or grayscale )sort of a "draft" quality) as it uses some color even for black:

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID and also on r PC it has only his info none of mi

When my husband and I got these iPhones . We had the same Apple ID .(not good) that has changed . We have a iCloud acct. how or what do I need to do to change on my setting under iCloud it has his Apple ID and also on r PC it has only his info none of mi

To change the iCloud account on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password when prompted to turn off Find My iPhone. When you delete the account you will be given the option to either keep or delete the iCloud data from your phone. This also, only deletes the account and the iCloud data from your phone, not from iCloud. Your husband's phone won't be effected by this. Then, to create a separate account, sign back in with a different Apple ID (you can continue to share the same ID for iTunes).
If you have any photo stream photos that you want to keep on the phone, save them to your camera roll before deleting the account.
If you're sharing the same ID for iMessage and FaceTime you'll end up getting each other's text messages and FaceTime calls. To prevent this, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with your new iCloud ID. Then do the same thing in Settings>FaceTime.

How can i change my advance setting in my icloud account information?

Hoaw do I change my dvance setting in my icloud account information?

Settings>iCloud>Tap on your account>Advanced (Mail)

How do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series

how do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series (specifically an IQ524)
This question was solved.
View Solution.

Doesn't it use an external AC Adapter? If so, all you should need to use in another country is an adpater plug to match the wall socket.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

How can I change a song setting that is protected

How can I change a song setting that is protected

Dj-Rod wrote:
How can I change a song setting that is protected
If the song is indicating a "Kind" of "Protected AAC," that is not a setting. It is an indication that the file contains Digital Rights Management (DRM). DRM cannot be removed through normal conversion processes.

Changing database character set from US7ASCII to AL32UTF8

Our database is running on Oracle database 10.1.0.4.0 (AIX) The following are its parameters:
SQL> select value from NLS_DATABASE_PARAMETERS where parameter='NLS_CHARACTERSET';
VALUE
US7ASCII
We would like to change the database character set to AL32UTF8. After following Metalink notes: 260192.1 (which helped us resolve "Lossy" and "Truncated" data, the final output of the CSSCAN utility is:
[Scan Summary]
All character type data in the data dictionary are convertible to the new character set
All character type application data are convertible to the new character set
[Data Dictionary Conversion Summary]
The data dictionary can be safely migrated using the CSALTER script
We have no (0) Truncation and Lossy entries on the .txt file. We only have Changeless and Convertible. Now accdg to the documentation, we can do a FULL EXP and FULL IMP. But it did not detail how to do the conversion on the same database. The discussion on the document tells how to do it from one database to another database. But how about on the same database?
We cannot use CSALTER as stated on the document.
(Step 6
Step 12
12.c) When using Csalter/Alter database to go to AL32UTF8 and there was NO "Truncation" data, only "Convertible" and "Changeless" in the csscan done in point 4:)
After performing a FULL export of the database, how can we change its character set? What do we need to do the the existing database to change its character set to AL32UTF8 before we import back our dump file into the same database?
Please help.

There you are! Thanks! Seems like I am right in my understanding about the Oracle Official Documentation. Thanks!
Hmmmmm...when you say:
*"you can do selective export of only convertible tables, truncate the tables, use CSALTER, and re-import."*
This means that:
1. After running csscan on database PROD, i will take note of the convertible tables in the .txt output file.
2. Perform selective EXPORT on PROD (EXP the convertible tables)
3. Truncate the convertible tables on PROD database
4. Use CSALTER on PROD database
5. Re-import the tables into PROD database
6. Housekeeping.
Will you tell me if these steps are the correct one? Based on our scenario: This is what i have understood referring to the Official Doc.
Am i correct?
I really appreciate your help Sergiusz.

When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting?

When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting? On other computers this shows up fine so it is clearly a problem with itunes and not my ipod.

How do i change the http setting to high speed

how do i change the http setting to high speed ???

Are you experiencing problems with a slow connection in Firefox?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Another possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

How do I change the default setting from Pages to MS Word for Mac?

How do I change the default setting from Pages to MS Word for Mac?

https://discussions.apple.com/message/13008817#13008817

How do I change the language setting in itunes

I'm sure this is a very basic question but I just can't seem to find anywhere to change the language setting. I live in Japan but would rather use itunes in English as I've twice now deleted my entire phone book on my iphone and had to go to an old backup. I suppose I should just have my girlfriend keep setting it up like the first time but I thought the whole point of apple crap is that even a nitwit newbie like me should be able to figure out how to use it.
wondering if I should have just stayed with good old Japanese cel phones...
gartheeeeeeeeeeeeeeeeeeeeeeee

that was indeed astoundingly easy. Well one less excuse next time I delete my phone book...
thanks very much!

Changes in IMG setting

Similar Messages

Maybe you are looking for