Changes in InfoSet reflected in associated Query

Hello,
Is there some type of lag between making a change in an infoset and having that change reflected in a sq01 query that is based on that infoset?
I updated an infoset and removed a selection from the "Extras-Selection Tab". I successfuly regenerated the infoset, but when I rerun the query that is based on the infoset, the selection criteria still appears. I have verified that the field is not defined as a selection in the query.
I have had this happen before. I create a new infoset and query and run through the cycle of testing/changing and then it seems that the infoset changes are no longer flowing.
Thank you for any thoughts or information.
Rick

Strange but I figured it out.
While I was working on the InfoSet, I had a 2nd window open that was running SQ01. I would generate the InfoSet in the 1st window and then choose the query in the list on the 2nd window and it would not reflect the changes I had just made. When I would exit SQ01 in the 2nd window and then go back into it, it would reflect the InfoSet changes.
It makes some sense when you think about it, but I thought executing the query would access the InfoSet definition but I guess it took exiting SQ01 and going back in to regenerate the query code.
RIck

Similar Messages

BEX Query Changes are not Reflecting in WAD

Hello SDN Experts,
I'm Facing a Typical Weird Issue. We got an Requirement to Create a New Variable in a Exisitng BEX Query. Assume that we have already a Variable on 0VENDOR. So I have Removed that Variabale and Added new Variable which was created by myself. So when I execute the Query I;m gettign displayed the new Variable wihch is working fine.
But the problem is with WAD. WAD is showing both the old and new Variables. So in selection paramater it is displaying two 0VENDOR variables instead of showing one.
Could you please Guide me how can the BEX Changes will get reflected in WAD report as well ???
Your advice are highly appreciated
Regards,
Aluri

Hello Hemanth,
This issue may be because you only removed variable but didn't change the 'input ready' settings of it.
Steps, go back to removed variable -- properties --- details -- then deselect 'variable is ready for input' -- save and exit -- try WAD report..
Hope this will help.
Thanks.

Query changes are not reflecting

Hi All,
Scenario: We have changed in Query from Query Designer in BED system and moved to Quality system but the changes are not reflecting. After checking tables RSRREPDIR and RSZCOMPDIR, we found out the information as below:
Note: Production System - BEP
Quality - BEQ
Development - BED
We have 2 issues with Queries in different systems as below:
Issue 1: Query name: T01
Issue 2: Query name: T02
Issue1:
Table - RSRREPDIR
BEP -
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (also present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
BEQ -
COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ   (also present in table - RSZCOMPDIR)
GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (also present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
BED -
COMPUID : 4T6BTKW1X3RYN7H2UO4WMLWLQ   (also present in table - RSZCOMPDIR)
GENUNID : 4T6BUM0LKCPAO5H71ZG983P72
COMPUID : 4U2P65LLZVYUZLGQFYPVZ1R2M   (not present in table - RSZCOMPDIR)
GENUNID : 4U2QC61SREY9HKJFVEHM894CU
Issue2:
Table - RSRREPDIR
BEP -
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (also present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
BEQ -
COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU   (also present in table - RSZCOMPDIR)
GENUNID : 4T6MEWPZ6178KB4LDKDREY34E
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (also present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
BED -
COMPUID : 4U18JA5FD2PB9ZB1RS0PWS5E6   (not present in table - RSZCOMPDIR)
GENUNID : 4U188U6N2623QPCTMC43MFOZY
but in Table - RSZCOMPDIR
BED -
COMPUID : 4T6MDKABLUBC46HOKZMC0K6KU
GENUNID : 4T6MEWPZ6178KB4LDKDREY34E.
Please suggest which query element and from which table we should remove to have a sync with all systems.
Thanks in advance!!
Regards,
Niranjan Chechani

If possible can u Compare Bex queries in All 3 systems Using RSRTQ tcode, Either they are matching or not?
How to compare using RSRTQ u can Refer Below :
Compare Bex Queries in Different Client /System.
Regards,
Seshu.P

Query changes are not reflecting in the Workbook.

Hi All,
I have modified the query by adding attributes. But the changes are not reflecting in the workbook.
Do i need to insert the query again in the workbook or is there any option that will reflect the changes in the workbook
Thanks in Advance,
Suneel.

Hello Suneel,
if you insert the query again, it will work, but it is not the best way to delegate the query changes to the workbook.
Just open your query from within your workbook (BEx menu 'change global definition') and use the green button at the top left in order to transfer the new query structure to the workbook. The query will be executed and you should see the changes.
Don't forget to save the workbook afterwards.
Regards,
Kirill

How do I change the default infoset on an existing query?

How do I change the default infoset on an existing query?
Thanks
Hannah

Hi Hannah Holland ,
If you had noticed the sequence in which we create Infoset queries, then your question will be automatically resolved.
For an Infoset Query report,
First we require a user group
Second we create an Infoset , which basically defines or answers your question "What DATA" you would want to display.
Third , you assign the Infoset to the user group.
Fourth, you create a query in that user group using the Infoset.
So , you build Query ON the infoset and not the other way round.
In other words, the query is created based on an infoset. So If you want to create a query on another Infoset, create an other ONE.
Revert if you need additional help.
Regards,
Subin John

Changes are not Reflecting in WAD

Dear Gurus,
I got a problem in WAD. Changes are not Reflecting in My WAD. When i created NewQuery in WAD by just placing Chart & Saved it. After executing Chart is displaced.Again I updated the same query by placing table and saved it. After Executing Table is not displayed only previously saved Chart is displayed. Could any one Kindly solve my Problem.
Thanks,
Sony

Hi Sony,
SAP BI has HTTP Cache and the web templates are stored in the HTTP cache of the server. So, when you change a template and execute it again - the previous version which is stored in the HTTP cache is being retreived.
To correct this, go to TCODE SMICM in the menu bar >> Goto >> HTTP Server Cache >> Invalidate -> Global in system
Once this is done, ask basis to restart the java engine.
I hope this helps you.!
-Pradnya
Edited by: Pradnya Rane on Sep 29, 2009 8:05 AM

Change in global structure in one query

Hi,
1. I have some five queries already developed. Here in all the five queries i am using one global structure. I have a requirement tp change the global structure, Now after i change the global structure in one query1 do i need to transport only that query1 or i have to transport all the five queries for the change to get reflected.
2. There are five workbooks also developed for the corresponding queires. After changing the queries do i need to update the output result in all the workbooks as well?
Here in the global structure the keyfigures are replaced with new keyfigures?
Little confused , need help? Please answer my two questions
Thanks,
rani

>
rani wrote:
> Hi,
>
> 1. I have some five queries already developed. Here in all the five queries i am using one global structure. I have a requirement tp change the global structure, Now after i change the global structure in one query1 do i need to transport only that query1 or i have to transport all the five queries for the change to get reflected.
>
>
> Thanks,
> rani
If you changed the global structure then transport the structure not the query.
Go to transport connection in RSA1 choose Query elements -
>Structures.
Select your structure and transport.
That should do.As long as you use "Restore to initial query" in the dataprovider properties of the workbook it should reflect your changes else you need to change at workbook level too.
Hope this helps.

I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my passwor

I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my password, which it won't accept because it's an invalid username.

I had this same issue and got it resolved very simply when I contacted Apple SUpport
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and sign into your infomation
> Go to Manage apple id and primary email address
> Change it to the old apple id that your device is asking for
> Save changes
> Go to Settings > iCloud and sign out of the infomation
> Go back to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
> Change it back to the correct apple id
> Go to the email address adn reverify the apple id
> Sign back into iCloud on your device
> Smile
Article to back up my statement http://support.apple.com/kb/TS5223

For FaceTime, can you add an additional e-mail that is not your Apple ID e-mail? Everytime I try to do this on my iPad it sends me a verification e-mail saying I am trying to change the e-mail address associated with my apple ID and wants me to verify.

I am trying to add another e-mail address to FaceTime, but do not want to change the e-mail address associated with my Apple ID. Everytime I try to add the e-mail address in my FaceTime settings, it send me a verification e-mail asking me to verify that I want to change to this new e-mail address for my apple ID. I do not. I just want to have an additional e-mail address for people to contact me via FaceTime. Does anyone know how to do this?

You can have multiple addresses associated with your apple id. You will have to verify any changes before they can be added and this is done by sending you an email. This is to protect you from someone else makeing changes to your account.
You can make any changes and view all your info here:
My Apple ID
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Changes are not reflected in Script output

Hi All,
i am facing a problem in SAPscript.
I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
please help me in this regard.

Hi,
Could you plese Check NACE whether your script is confiugring or not.
If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text.

Changes are not reflecting in the discoverer workbook

Hi ,
I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
Appreciate your help !!
Discoverer Version 4i
Thanks ,
Vijay

Hi West,
Thanks for the reply.
I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
Thanks,
Vijay

Work flow issue- Changes are not reflected at rum time

Hi,
    I want to change the Work item text for a task in a workfolw.
    When i am executing the worklow after changing the work item text of the required task(this task creates a work item), the change is not reflected. The work item is ceated with the previous text.
   Please tell me how to make change to reflect at the run time.
regards,
Shweta.

Hi ,
the problem may be in refreshing of buffer . Try to synchronize buffer manually using transaction SWU_OBUF.
Regards
Saurabh

Changes are not reflected after editing and saving the chart in th WAD 3.5

Hi all,
I have to display the chart in the report using WAD 3.5. But after creating a chart and then when ihave to make extra changes again and save the same, the changes are not reflected. I can see only the previous changes.
I am working on the chart for the first time. please let me know about the problem. My changes to the chart are not getting reflected.
Please help.
Thanks
Rani

How r u changing the graph??
Hope you are doing a right click and selecting Edit Chart. Click on Refine.
Then Click on Next till you get the button Complete. After you click on Complete, you save the Template.
Hope you are following these steps.

Changes are not reflecting using af:resource for adding CSS

Hi,
I am trying to add new CSS file(say the name as customNew.css) to page template using af:resource tag, the changes are not reflected. Instead I see(using firebug) that, styles coming from different CSS file(say the name as customOld.css ) which configured on trinidad-config.xml and trinidad-skins.xml files.
I was under the impression that, the new CSS file(customNew.css) will override the old css (customOld.css). So, CSS added using af:resource tag will not override any other CSS ???
Any help will be appreciated
Thanks,
San.

Hi,
if you bring CSS to the browser through af:resource then this is not overriding any skinning definition. Skins can only changed in trinidad-config.xml file (which also can be done at runtime). Just adding a CSS file to af:resource wont do the trick here.
Frank

Changes are not reflecting when de-implemented the SNOTE.

Hi All,
I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was got appended due to implementations of note , now it is not getting removed.
kindly help me out.....

Hi All,
I have implemented SNOTE : 79847 , which is having two steps one is manual and the another one is automatic . but now i want to de-implement the Snote due to some requirements .
After de-implementing the Snote ,i checked for changes in the standard program which were automatic . Over there the changes are not reflecting , that is the code which was got appended due to implementations of note , now it is not getting removed.
kindly help me out.....

Changes in InfoSet reflected in associated Query

Similar Messages

Maybe you are looking for