Changes in itunes not being changed on my iphone4s

Changes made on the iphone control feature in itunes, say add a song to a playlist or add an artist, are not being changed on the phone. Any ideas? thanks.

Hello there, imasummergirl.
Great job, troubleshooting your issue so far. You may want to try manually updating your iTunes Match using the steps found in this article to see if that helps correct your issue:
How to troubleshoot iTunes Match - Apple Support
Make sure you have the latest version of iTunes. You can download the latest version for free.
Launch iTunes on your computer.
From the iTunes menu, choose Advanced > Get Album Artwork.
Once iTunes has completed processing the album artwork, you'll need to update iTunes Match.
From the iTunes menu, choose Store > Update iTunes Match.
In your instance you can skip steps 3 & 4, as your issue doesn't involve Album Artwork.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

Custom change document is not tracking changes for SAP tables

Hi gurus,
I have created a custom change document for tables EKBE and KONV. But the change document is not tracking changes in BDCP table for changes in EKBE or KONV.
Please help me out.........

HI,
Use this link for change pointers concept.
change pointers
let me know if u have any issue.
~linganna

Itune not sync photo and my iphone4s fw 5.0 photo tab disappear

itune not sync photo and my iphone4s fw 5.0 photo tab disappear
after many time that I try to sycn my picture to my iphone4s is not success and also in my iphone I can not find photo tab(sunflower tab) as well. but my ipad 2 is no problem,Please help,thanks

Can't be done with iTunes. You can do it with the app PhotoSync. It will transfer videos back to camera roll.

InDesign CS3 5.0.4 Changes to documents not being registered properly

My boss has been complaining about a lot of "mistakes" lately and changes not being made, which is odd because I don't generally make a lot of mistakes. So I started paying very close attention and this is what I have discovered:
Sometimes changes that I make to a document will randomly revert. Sometimes changes don't get saved. The problem is random and not reproducible.
For example: I made a change to an item, and then copied and pasted that item onto another page. The change "sticks" in the new location of the item, but the original somehow, at some random future point, reverts to the pre-change state.
Another example: I moved an item on a page, then saved, then printed, then closed the document. In that order. The printout shows the change. When I opened the document again, the item I moved was back where it was before I moved it.
I am not having this problem in any other application. Just InDesign. Can anyone help me? I don't know what to do, but if it keeps happening, it could get me fired.
My computer is a Mac Pro 2.8GHz Quadcore. OS is 10.5.6.
I have, of course, already tried repairing permissions. Thanks for your help.

Hello Michael,
I just posted the exact problem to a new forum today ...changes revert... Have you had any problems since the preferences were trashed...? Do you think the Save As technique will work alone without the trashing of the preferences?
Well, you do have some company in your misery...
as if that is any consolation for being fired. . .
We hope it hasn't grown to that extent.
We do a quarterly magazine (Veritas) ... and this problem has plagues us since we've moved to CS3 years ago and just thought it was operator error. Until we started noticing much of the same proofreading errors version after version.
Let me know how you're progressing, and we'll report back about how we move along as well.
Until that time ... Earl J.
USASOC History Office
Fort Bragg, North Carolina

ITunes not fully changing email?

I have just changed emails. I have changed my email information in my iTunes account. But now when i buy something through iTunes i get a email, at my new email saying "thank you for shopping itunes" and its just some random add. but my receipt still goes to my old email account, how can i change this?
My old email was a paid service and I'm no longer going to be using them so i wont be able to get my receipts unless this gets changed.

Not all content types are available in all countries, which may be due to licensing (Apple can sell what the distributors/copyright holders allow them to sell) or in some cases what the country's laws/regulations permit. As you don't say what country you are in I can't check, but the content types that are available in each country are listed on this page : http://support.apple.com/kb/TS3599

Why can the settings in my itunes not be changed any more?

Hello,
I have the following problem: The settings in my itunes cannot be changed. Even if I try to change them, they jump back to the former settings. Therefore I do not succeed in watching my mediatheque on my TV-set. In my itunes settings there is a password for the opening of my mediatheque. But in the settings of Apple TV there is no field for a password. I can´t remove the password in itunes as ALL settings cannot be changed any more. What can I do? Thanks so much for your help.
klaus1003 from Germany

Jazznme2 wrote:
Do I need to be on the internet to access movies in my iTunes library?
No. The movies are on your computer.
And would these same movies in my library play in Rio, Brazil.
Yes. Your computer does not know where you are.
Most videos will not stream from US to Brazil......
iTunes application does not stream video over the internet anywhere. It only streams on your local network (to Apple TV or iDevice)

Changed Service Name not being used

Hi all,
Here is the scenario, I am using ABAP proxy to send data to XI system, earlier the business system was called BUS_SYS in the SLD, later we changed it to JI0220 in accordance with the naming conventions.
Subsequently the Business system and corresponding entries in the integration directory have also been updated.
The problem that I am facing is, when I try to send the message to the XI system using the same proxies I had earlier the service name being used is BUS_SYS, it doesnt get updated to JI0220. I have tried clearing of the SLD cache o the XI system, but this had no impact on the message being sent.
Is there a step that I am missing in configuration and or implementation?
Looking forward to your suggestions.
Regards,
Aniruddha

i have checked teh cache on teh integration server and it is updated, the cache on the integration engine i.e. the place we are sending messages from is not gettign updated, i though did find a table named LCRT_CLNTCACHE, where i updated the business system name and subsiquently the messages started working.
if there is some other method of updating the cache of the integration engine without chaging the table entry physically do let me know.
regards,
Aniruddha

Artist name/album name changes made in itunes not showing up on my iphone4S

I added some songs to my iphone and I changed some of the songs' artist names in itunes. However, the changes that I made in itunes are not showing up on the iphone. Changes to album names are also not showing up. But album art does show up on my iphone. I've tried converting id3 tags and I've tried resetting the phone but nothing has worked. Does anybody know what is wrong and how to fix it?? Thanks.

Haven't had the problem.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

"Sidecar file has conflict", keyword changes in LR not being written to JPEGs

I am new to Lightroom and evalutating 3.6 on a trial.
I performed the following test:
1. Imported 3 pictures into Lightroom from my hard drive
2. In Lightroom, I made a keyword change to one photo (removed a keyword).
3. All three photos' Metadata icon show the arrow, indicating that there has been a change. (I only changed the keyword on one photo.)
4. I click the icon for the photo whose keyword I changed.
5. I get the message "The metadata for this photo has been changed in Lightroom. Save the changes to disk?"
6. I click "Yes".
7. The photo's Metadata icon shows an exclamation point. When you hover over the exclamation point, it shows the message "Sidecar has conflict".
I have two questions:
1. My expectation is that when I changed a keyword, or any other metadata, in LR, it will show up on the photo outside of LR. My understanding is that this is a functionality of LR. Am I wrong? (The Help files seem to indicate that this is a reasonable expectation.)
2. I am assuming, having read many posts on the forum, that the error message "Sidecar has conflict" is a bug. Am I right? (My understanding is that JPEGs don't have sidecar files, which just makes this message even more odd.)
I am on Windows 7 Home Premium (upgraded from Vista Home Premium), 32 bit.
Thanks for your help,
--Elisabeth.

Beat, Thanks for taking the time to answer.
Your expectation is not quite right:
Any change to metadata will primarily be recorded in your catalog, and nowhere else. Only if you perform "Save Metadata to File" (which can be set to be done automatically in your catalog settings) or "Save the Changes to Disk" after pressing the arrow, the changes will be written into your JPEGs (or into *.xmp sidecard files for Raw images) and can be seen from outside of LR.
Yes, you are right. What I should have written was: My expectation is that when I change a keyword, or any other metadata in LR, the change will show up outside of LR, after I "Save Metadata to File". This is not happening, instead I get the error message and different keywords in LR than outside.
Where do your originals reside? Could it be you don't have the proper authority to rewirte the JPEGs?
My originals reside on my Public drive: I definitely have rights. In fact, I did many other change to photos in the same drive after I posted this on the forum.

IPhoto dates not being changed on iPhone

I have recently been dating all my photos as they are sometimes not dated right. The dates may be different than what I want them to be for whatever reason, like if somebody mails or texts me a picture. Or if I have them imported from a camera and the timezones are different. Anyway, I've been making the dates correct in iPhoto. I would change the date using the "Adjust Date And Time" option in iPhoto '11. I would type in the right date, check the box that says "modify orignal file," and move along. After I finished, I wanted to send some photos to my iPhone. When I did that, I was in iPhoto for IOS and noticed the date is the original date that was wrong. It was not the revised/edited date. So, I downloaded another application called Camera Awesome to see if it was just an iPhoto for IOS thing, and sure enough, they were still not right. Why is this? And is there a fix?
Thank you for your help,
Phillip

After I finished, I wanted to send some photos to my iPhone.
How did you do that?

Changes to tables not being picked up by certain Headstart Utilities

I modified an existing table in our repository by adding a new column to the table. This column has the same properties as another column in the table. The Headstart utility 'Maintain Default Events For Entities' had been run for all tables before the new column was added. As expected, all the columns in the table had UPDATE events created for them, except of course the new column.
As none of the events associated with this table had been used, I ran the 'Cleanup Unused Event for Entities' utility for the table and then re-ran the 'Maintain Default Events For Entities' utility for the table, in order to create an UPDATE event on the new column. This however, was not the case as an UPDATE event was not created for the new column. It appears to have been completely ignored.
I have checked for the obvious i.e. was the table change applied properly in the repository and had the database been properly re-generated from the server model and everything appears to be correct.
I have noticed that certain Headstart utilities, 'Enforce CDM Ordering Standard for columns' and 'Set column display length' do pick up the new columns. 'Enforce CDM Ordering Standard For Attributes' however, is another utility that does not pick up the new column.
Any solutions and explanations for the above would be much appreciated.
Thank You,
Aneesha.
null

Aneesha,
In your formulation of the problem, you seem to sometimes be using the terms "table" and "column" when you actually mean "entity" and "attribute". This makes it a bit hard for me to reconstruct your steps. Did you create both a new attribute on the entity, and a new column on the table, and are the two linked together (i.e. if you go to the attribute, is the "Implemented by Columns" node filled correctly?
Kind regards,
Peter
null

Prime Collabaration Assurance - ESXi Credentials Not Being Changed.

Dear forum users
I have a very simple problem and obviously you can provide a simple solution.
ESXi Hypervisors – 5.0 SU3
Prime Collaboration Assurance - 10.5.1.0.53684
I have 7 ESXi Hypervisors running 5.0SU3. They have SNMP communities configured for integration into PCA. The customer asked us to update the SNMP communities on the Hypervisors after a security audit.
This has been completed successfully but the PCA device work centre is still using the old community despite the fact I must have changed it over 100 times. I know this because if I put the old community back on the Hypervisor and verify the device from Device Work Centre, it passes.
I have deleted the Profile and re-added it with the new SNMP community. I have created a new profile and tried to discover the Hypervisors with this profile. I have re-booted the whole Prime appliance.
Does anyone have any ideas, this should be the simplest thing and it is driving me crazy.
Thanks.

Hi Aman.
OK, so PCA was configured for two SNMP strings the device work centre, manage credentials. One string was for RO, the other for RW. The customer asked me to change the RW string only following a security audit. After I changed it on the Hypervisors and PCA, they could not be managed because the SNMP credentials were incorrect. After analysis of Wireshark, it would seem that PCA is only using the RO string for management and not the RW. This is strange for two reasons:-
It was using the SNMP RW before because the Hypervisors were only ever configured with the RW string, not the RO so there is no other way it could of been managed. Why has it changed?
Why have the SNMP RW credential for an ESXi server if PCA does not use it?
Does that make sense?

Changes in Soundtrack not being sent to Final Cut Pro

I am editing in FCP and trying to use Soundtrack to edit the audio of my mov files. I am sending the audio to Soundtrack as a project. i edit the audio then save the file in Soundtrack but none of the changes I make are showing up in Final Cut Pro. I have Final Cut Studio 6. What is going on????

hey there MHASH,
sounds like you're using Soundtrack Pro. this is the Soundtrack Discussion. you should post your question in the Soundtrack Pro discussion.
good luck.

ICloud email name not being changed

Every time I send an email from my computer or iCloud.com it goes out with my old name in the "from" box. I updated my name associated with my apple id a couple years ago but iCloud has never made the change and it is becoming a bother. Any suggestions?

Mail Preferences > Accounts, select the account then the Account Information tab and change the alias to whatever you want to use.

Reply-to Address not being Changed as Anticipated

There is an ‘Advanced Options’ tab in the set-up page for BT Yahoo! Mail that has a sub-option ‘Mail Accounts’. I created a new account ‘iCloud Sending’ by filling in the ‘Account Name’, ‘Email address’, ‘Sending Name’ & ‘Reply-to address’ boxes, & followed the authentication process.
When I send an email from my iPhone 4S using iCloud it is correctly routed to its destination via smtp.mail.yahoo.com. However, the BT Yahoo! does not appear to modify the reply-to address from [email protected] to the specified address as I woud have expected. Has anyone else experienced this problem, please?

The iPhone does not support use of the Reply To field. That's why you haven't found an answer.
ArchHusker wrote:
...it is an extremely common business practice.
I would think not. My employer would certainly have issues with corporate emails being automatically forwarded to a 3rd party mail host like Yahoo or Hotmail. That would likely result in some sort of disciplinary action against the employee. A much more likely 'common business practice' is simply to have the Exchange account directly on the phone. Automatic forwarding (via Outlook left active on a computer, for example) is a common workaround when one's employer does not allow iPhone's to connect to the Exchange server, and as I stated, that probably violates policy at most companies.

Changes in itunes not being changed on my iphone4s

Similar Messages

Maybe you are looking for