Changes in iWEB '08 are NOT making it to my published iWeb site

Never had this issue with earlier versions. I run iWeb to make changes in pages that I have had up for months. iWeb says the changes are published. When I go here:
http://web.mac.com/tyreeford/Site/Resume.html
The changes are there.
When I use Safari and the link:
http://web.mac.com/tyreeford/iWeb/Site/Resume.html
I get the old unchanged version.
I have been using iWeb the whole time. Why did the URL change!? I didn't change it.
Thanks,
Ty Ford

From '06 to '08 the way iWeb handles the publishing thus the url changed.
web.mac.com/username/sitename/pagename.html is the new '08 url
http://web.mac.com/tyreeford/Site/Resume.html
you didn't change it, iWeb '08 changed it. Basically because the /iweb/ was useless and only made the url longer, looks much better now, don't you think so?
Regards,
Cédric

Similar Messages

HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

Changes made in BOM are not reflected in Configurator.

Hi all,
When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
This program has 2 parameters one for folder and the other for Configuration Model Id.
When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
We don't have a separate instance for COnfigurator.
Do i need to do any set up so that my Configuration model is reflected in the LOV?
Can anyone please help me on this?
Oracle Apps version: 11.5.10.2
Configuration software build: 11.5.10.25.43A
Regards,
Sreekanth

Hi Jason,
Please see my comments below
Jason said*
Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
Ex:
When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
Can you please explain this?
Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
Jason said:+
Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
a. A Model (PRJ = Project)+
b. The Model cannot be deleted (Deleted_flag must be '0')+
c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
Regards,
Sreekanth
Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

Changes to Excel files are not getting updated

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.

Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Changes in backing bean are not considered for deployment

hi,
i'm not sure whether this is a jsf specific issue but..anyway, here's the case: I'm using eclipse ( lomboz) as ide and whenever i change something in my backing bean (let's say add a new method) it is not found after redeployment neither after clean command. after some startups the changes eventually are adopted. this is really annoying as just starting the server takes me half a minute. so if anybody ever had the same or similar problem or has any experience with hot deployment please sent me a clue.
regards,
jens

>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport. Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing. The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

Changes in development system are not excluded

Anyone had this issue in CHARM before ?
we have SLFN - SDCR - SDMJ open for a change.
Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
Business now wants to stop this change and close SLFN.
How can I close/cancel SDMJ ?
When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
Is there a way to force close SDMJ ?
Thank you
Elena

>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport. Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing. The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

Yes Verizon has contacted me by phone. I never scheduled a call time nor did I call them. They also are not making it easy to contact them through email. I need to discuss a way to assure that my phone is never called again during work hours without a

Yes Verizon has contacted me by phone. I never scheduled a call time nor did I call them. They also are not making it easy to contact them through email. I need to discuss a way to assure that my phone is never called again during work hours without a prearranged meeting. I will not speak on the phone nor use a live chat. I want email as I want this documented offical and no other means offeres me that assurance. I'd also like to discuss comensation for being harrassed with phone calls.

Well if you pay your bill the calls would not happen.
You need only tell them not to call you during working time.
The Fair Debt Collections Practices Act states you must tell them it is not convenient.
Now if marketing calls you can opt out at the Verizon web portal under your My Verizon account.
You will not get compensation for them to call you. Nice try.
However they could just shut your phone off and then you will call them.
Email is not an option.
Good Luck

Changes in Crystal reports are not reflecting after publishing

Dear SDN Mates,
We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
Can anyone please help me on this.
Thanks and Regards
Arun S

Hello Prathamesh,
After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
This is happening for all reports. Can you please suggest me on this.
Thanks and regards
Arun S

PP & AE Dynamic link - changes made in AE are not showing up in PP

Hello,
I am doing the following:
1. In Premiere Pro (CC 2014) I select a clip on the timeline --> right-click --> Replace with After Effects composition.
2. In AE, I am doing some animation of text.
3. Usually, any changes done in AE, are automatically shown in Premiere + the red line appears which means I have to render the clip.
4. Once in a while and not vert often, for certain clips, it randomly stops working:
I am making a change in AE, but the change is not seen in Premiere and the line above the clip doesn't change to red.
Any idea what might be causing this and how to fix it ?
Thanks,
Tal

Thanks for you responses WC. The changes I made to iPhoto did eventually show up, but it took over an hour. This is really the only 'issue' I've had with my ATV2, but it was extremely frustrating. I tried rebooting the ATV, my computer, and a number of other things, but nothing worked. Eventually I walked away from it, and when I came back everything had updated.

Changes made in EMS are not reflected in EMC

Hello all,
I realise that this is 2013 discussion, but I could not find a 2010 section.
My problem is simple: any change that I make inside the Exchange Shell is simply not reflected in the Console. It doesn't appear there. It can't be searched for. Nothing.
I'd like to know how to fix this. Exchange is very broken when it is operating like this, and I pretty much cannot do anything. Customer GALs are exposed to each other, etc.... because changes won't occur even though the shell says they have.

Hi
What changes are you making? Some changes do take time as replication etc. happens in the backend. Have you tried restarting the server? do you see any changes after that?
Please also check the Application log for errors.

Changes to my bookmarks are not saved when firefox is restarted. I already tried deleting places.sqlite, but it is still doing this.

Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.

Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Changes made in Lightroom are not displayed in Bridge.

When I make changes to my jpeg or psd files in Lightroom 4.3, these changes are not displayed in Bridge.
I'v checked the appropriate box in Lightroom's Catalog Settings "Auotmatically write changes to XMP".
What am I doing that's incorrect?
Digitalmac.

With the box <Auotmatically write changes to XMP> checked, it may take a while until Lr "gets around" to writing the changes to xmp.
To check directly do this: immediately after you made changes to an image (PSD or other) press Ctrl / Cmd + S (letter S on you keyboard), wait until the progress bar has finished and then check your image in in Bridge.

My iWeb pics are not in my iPhoto library - and have not been for a long time. I want to get my photos back off iWeb - any suggestions on how to do this?

I want to get copies of the pics on my iWeb but they are not in my iphoto library anymore. Does anyone know how I can get them - easier and faster than downloading my own pics one at a time?

A visual:

Modified changes to ESS DC are not visible

Hello Experts,
I have imported the DC and checked out. I have modified essusfam~sap.com by adding a text field and input label. Saved all my changes and tried to deploy the code from the context menu in webdynpro explorer. NWDS prompts for SDM pasword and later I see the deployment sucessfull. But, the changes are not visible. Just want to know if I am missing any steps before deployment. or do I need to follow any more steps.
I am trying not to use NWDI deployment process
Thanks,
Sharath.

Hi Sharath,
When building, choose project then right click and select build... from Development Component section.
Regards,
Raj

Userexit in VA41. Changes to field aufnr are not saved

Hello,
I have to fill the field xvbap-aufnr with the field vbeln during saving a order (contract) in VA41.
I tried to use "userexit_save_document" and "userexit_save_document_prepare".
The problem is that in userexit "userexit_save_document_prepare" the field vbeln is not field because we use an internal num range.
In userexit "userexit_save_document" the vbeln is filled but I am not able to change the entry of xvbap-aufnr. I can change the field value but my changes are not written to the data base. Why ????
Thanks

If the number range for VBELN is internal, you cannot change it through user exit. Changes made to structure fields in USEREXIT_SAVE_DOCUMENT will not have any effect.

Changes in iWEB '08 are NOT making it to my published iWeb site

Similar Messages

Maybe you are looking for