Changes in Lightroom5 not saving

I have the automatically write changes to XMP box checked, but when I look at the photo in Elements, the changes have not been applied. Am I forgetting something?

If you want the photo to appear in Elements the way it appears in Lightroom after you edited it, you need to either export the photo, or better yet use the Edit In... command in Lightroom.
Elements will not read your edits in XMP.

Similar Messages

I am able to change and add bookmarks, but these changes are sometimes not saved when I restart Firefox.

Since updating to Firefox 4, changes to bookmarks are saved sometimes after restart, but not usually (maybe 25% of the time). The problem sounds exactly like what is described on the [[Bookmarks not saved]] help page, yet after making all the recommended changes, the problem persists. I have also performed the recommended actions on the [[Toolbar keeps resetting]] help page, with no luck there either.
The only other thing that I can think of that may be helpful is that I use Firefox Sync between two computers, and both seem to be having this problem.

I have some more information, in case it helps. During one Firefox session, I made about 8 changes to my bookmarks.When I restarted Firefox, the first few changes I had made were saved, but the rest were not. Additionally, the favicons that were present during my last session (that I hadn't had before that session) were reverted to the default favicon. I hope this helps!

Iphoto 11 , How to save changes to photos, not saving -/ snow leopard

Hi , after much ado then discovering the recent "fix" for Iphoto 11 I started using it today. I uploaded new photos , edited them and quickly discovered that Iphoto was NOT saving any of the changes I had made.There is no longer a "Done" button so I went back to again check the few photos I had adjusted , Iphoto only saved changes for one out of 10 of the photos I had adjusted.
Is there a "save changes" function I am missing here? Anyone else experiencing this problem?

How are you exporting? If you select the photo and export (file menu ==> export) with kind = JPEG or current the edited version will be exported
if that is not happening try renewing your preference file -
A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
LN

"Automatically Write Changes into XMP" Not Saving XMP Files

I tried finding some other discussions on this but I couldn't seem to find anything...
I recently checked the "Automatically Write Changes into XMP" setting in my "Catalog Settings". However, as I continue to add pictures to my library and make changes, I do *not* see the XMP files being written to the location of the pictures (Nikon NEF files located on my hard-drive). In fact, I can't find the XMP files anywhere. If I want to output the XMP files I have to do a Ctrl + S (Photo --> Save Metadata to File).
I did notice that when I unchecked the setting and re-checked it, *some* of the XMP files showed up. However, in my import of 24 photos, only 14 had XMP files. I had to manually "Save Metadata to File" to get the XMP sidecar files to show.
Am I doing something wrong? Is something not working right? I'm a bit confused. I assumed it would automatically export the sidecar files.
How often should it be outputting XMP sidecards? If I import a new image should the XMP sidecar file be created? Or is it created the first time I change an original picture?
I am using Adobe Lightroom 2.0 (Camera Raw 4.5) on a Mac OS X 10.5.5.
Thanks,
-Leftquark

@Eric: hitting cntrl+s works but can be tedeous on large galleries. I've been doing this but it can be a pain.
@Jeannine: different topic than this thread but to answer anyways... Lightroom automatically saves all changes into your catalogue. You never need to dave your changes (here's the kicker though) as long as you do not move the original file. If you
move the file than lightroom won't know that it's the same image as the one you've edited. Once you are done editing your image you will need to "export" the image to a new file (you don't wan to overwrite the original). If you don't export than only lightroom will have your edits. Lightroom is "non-destructive" Which means that it doesn't touch your original photo. Lightroom keeps a text file containing the instructions on what you did to make the edited version. Since your changes are just text inatryxtions you have to "export" the image to get your final image in a version you can put online, print, etc. But to answer your original question, I think you prob moves the original image. If not, could you give us more info?

Changes in mail not saving in Yosemite

When I upgraded my macbook air to Yosemite overtime I log into my mail I get a message the message "mail cannot send your password securely to the server. You can remove this restriction in the Accounts preferences by setting “Allow insecure authentication”, which could put your password at risk."
When I check the box in preferences it works for a while but if I exit mail and come back I get the same message - why is this preference not being saved?

Same here. I'm having nothing but problems with Apple Mail via Yosemite right now and this very situation that we're both experiencing is making me miserable at the moment. There more I start changing settings the more I'm likely going to have a mess. I'm still experiencing the issue of emails that reach my Go Daddy Imap webmail...being downloaded until quite awhile later via the new Apple Mail client. In other words....nothing's different the last several months of having to constantly quite the application.
Email is so critical for everyone...I was praying that email would sync and be improved in this new version.

Changes to timeline not saved, Captivate v2

(Captivate, v2, Windows XP SP2 OS)
I've been struggling with this for 2 days - I have multiple
objects on a slide and have rearranged the order of the objects on
the timeline - by dragging and by using the menu. After making the
changes, saving and closing the file, when I reopen it, the objects
have reverted to the original order.
I have tried rebooting my PC and also reinstalling Captivate
with no success. Does anyone have suggestions?

This question has been cross posted to two different forum
categories. Please direct any responses to where the question first
appeared. You may do this by
clicking
here

Changes in iCal not saved.

When I update appointments or To Dos, they are no longer recorded. Changes appear to be made, but when I leave and then return to iCal, it reverts to an earlier state. All software has been updated. Any ideas?

Hi
Please try doing this modification using a reponsibilty starts with EAM.
Regards,
Murali

Non admin user - changes not saved (Safari settings, system prefs, etc.)

iMac, 2 users, one is administrator and other is standard user. Recently, in the non-admin user account, it has become impossible to make any changes. For example, adding an application to the the Dock, after logging out and back in next time, the application is not in the Dock any more. Also, making changes to the prefs in Safari, changes are not saved.
I noticed this after installing FireFox v4. I installed it as admin whilst in the non-admin users account. However, I don't believe that the installation of FF has anything to do with the problem, it just highlighted it. I've checked the permissions for the various directories that hold prefs info such as user/libraries/application prefs/etc. etc. and also Safari prefs. Nothing I can see that has changed in system prefs.
Any ideas on what has caused the problem (kids are known to fiddle from within the non-admin account) and any ideas on how to fix it?
Thanks

Hi PPRuNe,
You could try making the standard user an Admin too. To do this, make sure you are logged in to the standard user, go to System Preferences > Accounts > Standard user (you may have to unlock the padlock) > Allow user to administer this computer
This will allow changes to be made without being prompted for a password all the time.
However, if you had Parental Controls on, they probably won't work on an admin account because as an admin you have complete control over a computer, so the computer thinks there is no point in having the controls turned on. And if the kids are known to "fiddle," just think carefully!
Hope this helps you.
Chris.

Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
Curtis

Ok, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis

Changes to my bookmarks are not saved when firefox is restarted. I already tried deleting places.sqlite, but it is still doing this.

Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.

Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Changes in LRmob are not saved to camera roll on ipad...

I just have been working on a batch of photographs on ipad and saved all the worked on images on my camera roll in ipad. When I opened my camera roll none of the changes had been saved, the photographs were the ones I had synced from desktop to ipad.
The changes have been saved on my desktop though.
Is it not possible to save the file with applied changes to camera roll for sharing with Instagram and Foap? If we can't save changes to camera roll I might as well stay with VSCO cam in ipad then...
A work around is of course that I can pluck them back off probably from the Adobe cloud, but that is another step added to my workflow.
I was hoping to use LRmob because the syncing is wonderful, and I start with LR for all my photographs.
My current workflow is to import pics in LR, then drag the ones I want for Foap and Instagram via iPhoto and shared stream to get them onto ipad or iphone. Import in vsco and from there send to instagram or Foap. I know, rather heavy workload.
I had hoped that LRmobile would have cut this load in half...
I wonder if it is possible to make the changes applied in LRmob savable in camera roll... Since LRmob has been designed for idevices, it does need a saving option on the device. Otherwise it's missing a major feature.
I must admit that the filters and processing are fab... My pics do look so smashing on ipad air.
I am very happy with LRmob apart from the question title...

Thanks Rikk, that is how I understood it. Thanks for your speedy answer, I really appreciate it. And that is exactly how I shared, I just thought that the changed images did not go to the camera roll. I will try again!
Thank you so much!

Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved

When i make changers to my firefox settings and i close the browser, the changes are not saved, why?

when i make changes in the options menu like - allow pop ups or never remember history, it works great but when i close the browser, the changes i made are not saved, this never happened on the previous version
i have unistalled firefox4 and reinstalled it but this dows not help

See:
* http://kb.mozillazine.org/Preferences_not_saved

UI Shell : Changes are not saved. If you leave this page

Hi,
My JDeveloper version is 11.1.1.6.0
I have on VO having all transient attributes. The vo having dependent LOV's . When i am not not selecting the value from lov and trying to close the UI Shlll it is not showing warning message.
When i am changing the lov then trying to close the UI shelll then it is shows the "Changes are not saved..." warning message. I want to skip the warning message . How to do that
Thanks
Deepak

go to <af:document id="d1" > tag and then property inspector and the n make uncommittedDataWarning to off.
Thanks
Pratee.

Template changes are not saved??

Hi all I have a template with a table..
I removed the borders for few columns and saved the template.
When I reopened the template I still have borders...I removed the borders for like 10 times and also, saved the template with different names..STill the same issue.
When I preview the output immediately after changing the borders, I see correct out put without borders.
When I close and reopen the template, again I see borders...
Please help me..
Thanks!

Hi,
actually its not saving due to some problems in word.
do as follow
first open msword->create template save that in .rtf and ->remove border(select table in table properities select no borders)
and then try i think it has to come.

Changes in Lightroom5 not saving

Similar Messages

Maybe you are looking for