Changes in Logistics DataSource Extract Structure

Hi All,
We intend to transport our enhanced extract structure of our Logistics DataSource. We know that extraction queue and delta queue must be emptied first before the transport starts.
However, we are wondering whether a re-INIT of delta also must be done or not. At this moment, we have delta up and running already.
Please advice. Thanks.

Hi Reddy,
Thanks for your fast reply.
No, we don't need that historical data. Perhaps, to be more specific, we are wondering whether a Re-INIT without data transfer should be done again or not ?
We have two cubes. One is old one with up and running delta. The other is new one which we are going to transport soon.
So, we plan to use same delta infopackage later for these two cubes.
The concern is now about the delta.
Please advice again. Thanks.

Similar Messages

  • Crm datasource  extract structure &communication structure

    hello all,
    how to find standard datasource extract structure in CRM.
    its very urgent.
    i will give full points.
    advance thanks to all.

    hi,
    check out the following link to know about the CRM BI Conetnt all(infocubes, datasource, roles)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
    hope this help you
    regards
    harikrishna N

  • Change name of generated extract structure

    Hi,
    when creating a generic datasource for texts based on a table / view I face the following problem.
    The abap developments are done using a /xyz/ partner name space, so the table has the name /xyz/mytable created in a package /xyz/mypackage. The system has no partner name space for bw developments so datasources are created in the standard customer namespace starting with a letter. When saving the data source the system generates the extract structure ZOX<sys-id>NNNN. As it is a development object in the customer namespace I cannot put it into my partner namespace package. This brings me in trouble with the development rules as I am not allowed to create a customer namespace package Zmypackage.
    Is there any possibility (Customizing, BAdI, etc.) to take influence on the name generated for the extract structure or is it possible to set the the structure to use by hand?
    I am aware that it would be possible to put the extraction into a function module where I can specify the extract structure to be used but it would be great for reducing complexity and future maintanence if there was a way using the table / view based datasources.
    Many Thanks
    Roman

    Hi,
    I think is not possible, this functionality is not visible in the PDI and is made directly in the backend by the standard.

  • Need help in enhancing CRM datasource /extract structure

    Hello Experts,
    I have come across an issue with a CRM DR phase 1 report "Program Status Management report".
    The user wants to display Mobile number and Pager number of a contact person for the customer.
    Contact person is a Business Partner (Mobile no, Pager no are attributes for Business partner), and the extractor which extracts communication information about a business partner is BUPA_DEF_ADDRESS_BW (from data source 0BP_DEF_ADDRESS_ATTR.)
    This extractor only gets First Telephone number and Fax number from the table. The same CRM table also has the info about Mobile number and Pager number. But BUPA_DEF_ADDRESS_BW is a standard extractor.
    From the searched forums, mobile number is stored in the field TEL_NUMBER from table ADR2 in which we need to filter the R3_USER = 3. We need to know how we can append/include this mobile phone/pager number fields in the extract structure since this is a standard extractor and might need to edit a BADI/FM. Please advise. Thanks!

    there is no different as generic DataSource.
    1. TC: RSA6, find your DataSource and click on " extend extractStructure" at the navigation bar.
    2. TC: SE38 to write UserExit to populate the data for append fields.
        UserExit: ZXRSAU01 if your DataSource is for Transaction Data
                       ZXRSAU02 if your DS is for Master Data
    hope this help

  • Change the attributes of extraction structure

    Hi experts
    I have a Extraction Structure (ZOXBDE0160) in BW DEV system and I want to transport to BW QA but i can not because the structure attributes haves package $TMP but i can not change the package I think that's reason.
    Only I need is to transport this structure, can anyone help me please?
    Thanks 

    Hi
    First change the package of the structure attribute, then only you can transport the structure to further systems.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d1/801972454211d189710000e8322d00/frameset.htm
    Regards,
    Venkatesh

  • Difference between Extraction Structure and Datasource

    Hi Gurus,
    I have a very basic question here.Can anybody explain to me in detail the difference between an extraction structure and Datasource.
    Thanks in advance

    Hi:
    I am pasting a summarized def. from sap notes.
    http://help.sap.com/saphelp_bw30b/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    Data Source:
    Data that logically belongs together is stored in the source system in the form of DataSources. A DataSource contains a number of fields in a flat structure used to transfer data into BW (Extract Structure).
    Extract Structure:
    In the extract structure, data from a DataSource is staged in the source system. The extract structure contains the amount of fields that are offered by an extractor in the source system for the data loading process.
    You can edit and enhance DataSource extract structures in the source system. To do this, in the BW Administrator Workbench choose Goto à Modeling à Source Systems à Your Source System à Context Menu (right mouse click) à Customizing Extractors à Subsequent Processing of DataSources.
    While, you are on the topic, you have one more structure.
    Transfer Structure:
    The transfer structure is the structure in which the data is transported from the source system into the SAP Business Information Warehouse.
    It provides a selection of the extract structure fields for the source system.
    It may be a good idea to look into a sample Business Content extractor to get a better understanding of how they are related.
    Chamarthy

  • Extract Structure and its program

    Hi Experts,
    Is it possible to know what program/function module is used by datasource extract structure to get the data?
    In my case i need to know this information regarding the extract structure HRMS_BIW_IO_OCCUPANCY (0EMPLOYEE_ATTR).
    Thanks in advance.
    Fabio

    Since a lot of time ago (the last time I met him) he lent 10 euros to me, I was just remembering that I'm still in debt to him !
    (but I'm thinking now that our answer can be evaluated around 10 euros, so...)

  • Change an extract-structure in an existing datasource

    Hello,
    I want to change an extract-structure in an existing datasource (0COORDER_TEXT), but I don't know how to do.
    (I first thought I can do it with trx RSA6.)
    Can anybody give me a hint how to change the extract-structure?
    Kind regards
    Udo

    Hi,
    yes, you can change an extract-structure in an existing datasource . The enhancemet of DataSource is the process of enhancing your extract structures by creating an append with your ZZ/YY fields and filling these fields using a specific user exits. Then you have to fill those fields with some ABAP custom code that can be anything from some simple calculations or table lookups to complex business logic requiring access to multiple database tables. You can do that by CMOD, creating a project and using the enhancement:RSAP0001.
    You have to follow bellow steps:
    1. Go to RSA6.
    2. Select the Data Source.
    3. Select display Data Source (Ctr+F2).
    4. Double click on the Extract structure.
    5. Click on the Append Structure.
    6. Add the required field .
    7. Activate the Append Structure.
    8. Go to CMOD.Give the Project, select Display.
    9. Click on ZXRSAU01.
    10.you have the bellow exits:
        a).Transaction data: EXIT_SAPLRSAP_001
        b).Master data attributes: EXIT_SAPLRSAP_002
        c).Master data texts: EXIT_SAPLRSAP_003
        d).Master data hierarchies: EXIT_SAPLRSAP_004
    11. select Transaction Data EXIT,then you have to write the ABAP CODE
    12. save and activate.
    13. check the data in RSA3.
    These steps will help you.
    Regards,
    Suman.

  • Unable to change Extract structure MC03BF0 for DataSource 2LIS_03_BF

    Hi all
    In LBWE in R/3, I need the change the extract structure MC03BF0 for DataSource 2LIS_03_BF, by including some fields from MCMSEG pool. On including these fields from MCMSEG pool on the right side table to the left side table, and on confirming these entries, I get the following error message,
    ' Struct. from appl. 03 due to open V3 proc. not changed '.
    The long text for this message is :
    'Diagnosis
    Changing the extract structure MC03BF0 of application 03 is not allowed as there are no V3 update entries for the update module MCEX_UPDATE_03.
    If an extract structure is changed for which there are still open V3 updates, these can no longer be updated and the V3 collective update is terminated.
    Procedure
    Start the V3 update using the "Job Control" function in the customizing cockpit (transaction yDS:TRAN.LBWE>LBWE) or delete those update entries that are already incorrect. You will find these in the update overview.'
    Please guide me with what is to be done so that I can maintain the extract structure.
    Thanks
    Urmi

    Jelina,
    I think still some records available at SM13 clear it aswell.
    Clear records at LBWQ, SM13, RSA7, Setuptables in all CLIENTS of R/3 and check.
    Still a problem, then instead of enhancing datasource from RSA6, take extract structure name and enhance from SE11.
    P.S: Its better to create a new post by referencing same thread, so you can close call by assigning poings.
    Srini

  • Changes in extract structure

    Hello All,
    The extract structure for 2lis_11_vaitm has been changed and since then whenever I try to execute the datasource using RSA3.
    I get an error Import_mismatch_error.
    The extractor was working fine in dev. So I collected one structure which was missing in quality.
    After releasing the same in quality, I deleted the setup tables and did run RSA3 - I got 0 records.
    As per the SAP note 328181 - the old Sales orders are not compatible with the new structure and so we get the same error.
    If any new documents are posted they will come in RSA3. How do I make sure that in Production I dont miss any data?
    Regards,
    Nikekab

    Hello Venkat,
    I found one error description though:
    Error when resetting DataSource 2LIS_11_VAITM                 OKQCLNT332 to the active version
    Message no. RSO410
    Diagnosis
    Errors arose when activating DataSource 2LIS_11_VAITM. An active version already existed before theactivation.
    System Response
    DataSource 2LIS_11_VAITM  could not be resetto the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
    Procedure
    The old active version of DataSource 2LIS_11_VAITMcan no longer be used. Remove the cause ofthe activation error and activate DataSource 2LIS_11_VAITM   anew.
    Regards,
    NIKEKAB

  • Custom Datasource using View COVJ - R8359 Invalid extract structure

    I'm trying to build a custom datasource so I can get at plan line item data with partner object (I've tried using 0CO_OM_CCA_1 but I dont get the partner object for plan data - no idea why). So I thought if I create a datasource using COVJ I can get it out. However when I try and save the custom datasource (created using RSO2) I get the error R8359 Invalid extract structure: You tried to generate an extract structure with the template structure COVJ. This operation failed, because the template structure quantity fields or currency fields, for example, field WOG001 refer to a different table.
    I saw posts saying when people get this error thye should reference the table these fields come from in the view. So I've talked to our ABAP'er and I asked him to reference the table these fields come from but he said this cant be done because these come from a structure not a table.
    Any ideas?
    Thanks
    Joel

    The WOG* columns in table COEJ, one of the tables contributing to the COVJ view, use CCCUR-CURKY as the reference table-column for those quantities. The ABAPer you spoke to is correct that CCCUR is a structure. View value fields inherit their reference table-column from the source, in this case COEJ, and since this source table is an SAP delivered table it cannot be modified change this reference.
    This means that you're only option for extracting the data out of the COVJ view would be to create a Function Module and use that Function Module as the basis for your DataSource.

  • How to create a New Tranport Request for changed  Extract structure

    How to create a New Tranport Request for changed  Extract structure ?
    Hi Experts,
    I have a FI AP Generic Datasource containing extract structure with appended fields.
    It has already been activated and transported to Testing System.
    Now, I am to create a new transport request for this DataSource and Extract structure.
    I do not want to delete and recreate the Generic Datasource.
    I am trying to look at the options in the extract structure top menu from where I can create a new Tranport Request.
    Please let me know the steps
    URGENT

    Hi Dev,
    Once you send the transport request for any data source from Dev to Testing you wont find that again in your Dev (I mean the TR). So, when you change anything for this data source or view now in Dev and try to save it, it will ask for a new transport request and here you can mention a new one starting from View then activate it and go to RSO2 regenerate it and use the same transport request for this too. When you transport this TR to Testing Environment the data source will automatically get changed.
    Hope it helps...

  • Do we need to fill setup table if we change extract structure of D/S

    Hello Experts,
    as we are in need of adding new filed to existing delta enable Datasources.
    Do we need to fill the setup table if we change the Extract structure of Data source which is already loading Delta data to bw system?
    case 1) we are planning to add new field directly in maintain structure in TCode LBWE.
    case 2) adding new field to Extract structure and writing relavent code in CMOD.
    Thanks in advance
    Regards
    Ravi

    Hello Ravi,
    If you are adding new field to a structure, even though you do not need historical data in the new fields it is a mandate that you have to replicate the datasource and then reinitialize the datasource, in both the cases you have mentioned. The reason for this is, the RSA7 contains your existing structure, as you are changing it, a new replica needs to be created in RSA7. You have to run a INIT without datatransfer, dont need to refill the setup tables for the INIT without data transfer.
    After you activate the new fields and poppulate it using CMOD. First transfer all the records in SMQ1 to RSA7, using a V3 update. Then run a delta in BW, by this way you will load all the existing records from source system to BW. Then replicate the datasource and create the required InfoObject and mapping in BW (Please note that without deleting data, you wont be able to change the DataTarget structure unless you are using remodelling in BI 7.0). Delete the datasource entry in RSA7. Runa INIT without datatransfer.
    Please let me know if you need any more information.
    Regards,
    Pankaj

  • Change Extract structure -- Access key required ?

    Hi guys,
    I wanted to change the extract structure for one LO extractor. Just add one field from the available pool of fields. Is access key required for this ?
    Thanks,
    BWer

    You can't directly change the extraction structure without an Access Key, nor would you want to. Instead, go to SE11 and pull up the extraction structure you want to modify, in update mode, and then click on the Append Structure... button. You can add the columns of data that you wish to have on the DataSource there. After re-activating the structure, you should then be able to see the columns that you added in the maintenance view for the DataSource, pull them over, re-generate the DataSource and create the code in CMOD to populate these columns.

  • Change to Extract Structure Doubt

    Hi,
    Our Basis Folks are trying to install Patch 6 ST-PI 2005_1_700 in ECC. I refered to OSS Note 328181.
    For this Patch do we need to delete the Set up Table and Fill it again? And How about Init Delta in BW?
    Please suggest me. Any answers will be appreciated with Points.
    Kind Regards
    Mahesh.N

    Hello,
    Yes you have to delete the Setup table data before that as per the OSS Note you have to clear the delta queue data which cannot be recovered after changing the extract structure. So execute the BW Delta Infopackages and make sure there is no delta records in RSA7 or LBWQ.
    Then you can delete the setup table using LBWG and implement the patch.
    1. Make sure that the following steps are carried out at a time when no updates are performed so that no data is lost.
    2. Start the update collective run directly from within the Customizing Cockpit. Up to PI(-A) 2001.2 , this collective run exclusively concerns the V3 update. As of PI(-A) 2002.1, depending on the update mode setting of the application, the collective run concerns either the V3 update or the update from the extraction queue ("Delta Queued", see Note 505700).
    3. Load all data of the respective DataSource into the BW System.
    Now you can make the change.
    After a change you can no longer use the statistical data already recreated. If such data still exists, you should delete it (Transaction LBWG).
    We recommend in particular to upload the data immediately after a restructuring and (after checking in BW) delete them from the restructuring tables.
    Moreover, the update log (Transaction LBWF) can no longer be read. Post a document in this case so that the last log entry is overwritten. This log entry then has the correct new format of the extract structure.
    As of PI 2000.2 the program RMCEXDELETELOG is available. It can be used to delete log entries.
    But if there is any change in lenght of any field of the extract structure, then you have  to reload the entire data again in BW otherwise a Init without data transfer will do.
    But what is the patch all about? Please follow the instruction given in the OSS Note 328181 - Changes to extract structures in Customizing Cockpit.
    Thanks
    Chandran

Maybe you are looking for