Changes in Official Bios ver. 1.2 for Neo4 Platinum (MS-7125)

The .txt file inside the zip reads:
This BIOS fixes the following problem of the previous version:
- Update NVMM version to 4.79.
- Support Maxtor 300 GB HDD.
- Update NVPXE version to 2.03.0469.
- Update NVRAID version to 4.81.
OK, I get the second and the fourth ones. But does anyone have any idea what NVMM is? Is it Nvidia Memory Management?
And what is NVPXE? Uneducated guess is that it stands for Nvidia PCI-Express.
I'm looking forward to reading your well-informed input.
TIA, DEM

I think is more useful if they will explain what's new with a human language

Similar Messages

Need help with bios settings for Neo4 Platinum

Hi. I've checked several guides on bioses and still have questions about my settings. I'm not an overclocker, so I'm looking for stability over anything else (although I don't want my computer to run like a pig . I'll post what I have and the parts of the bios that I'm unsure of. I also have saved pictures of a Cpu-z scan if that helps. Any suggestions are much appreciated!
Here's my stuff:
Motherboard: MSI K8N NEo4 Platinum (MS-7125)
Processor: AMD Athlon 64 3000+ 512K 90nm (Winchester socket 939)
   clock frequency: 1800mhz
   system bus: 2000
   operating mode: 32/64
   voltage: 1.40v
   max temp: 70 degrees C
   thermal power: 89w
   L1 cache: 128KB
   L2 cache: 512KB
   cmos technology: 90nm SOI
   memory controller: 128-bit
Award bios version: 1.9
Installed ram: Micron Crucial Ballistix 512MBx2 (1024MB total) (Crucial
part number BL6464Z402)
   PC3200 400mhz Dual-Channel DDR Dimm (184 pins)
   configuration: 64Meg x 64
   unbuffered/non-ecc
   voltage: 2.8v
   memory timings:   2-2-2-6
Here's my current bios settings (I've only listed sections that contained settings that I was unsure of):
ADVANCED BIOS FEATURES
quick booting: enabled
boot to os/2: no
ioapic function: enabled
mps table version: 1.4
full screen logo display: disabled
seek floppy: enabled
typematic rate setting: enabled
typematic rate: 30
typematic delay: 1000
security option: setup
ADVANCED CHIPSET FEATURES
--->>DRAM CONFIGURATION
timing mode: manual
memclock index value: 200mhz
cas# latency TCL:2
min ras# active time TRAS: 6t
ras# to cas# delay TRCD: 2t
row precharge time TRP: 2t
row to row delay TRRD: auto
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
read-to-write time TRWT:auto
write recovery time TWR:auto
write to read delay: TWTR:auto
refresh period TREF:auto
user config mode: auto
x bottom of 32-bit [31:24] io: D8
x 1t/2t memory timing: 2t
x read preamble value: 8ns
x async latency value: 9ns
s/w memory hole remapping: disabled
mtrr mapping mode: continuous
PNP/PCI CONFIGURATIONS
primary graphic's adapter: first pcie
resources controlled by: auto (escd)
x irq resources setup: press enter
maximum payload size: 4096
CELL MENU
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
high performance mode: manual
aggressive timing: disabled
dynamic overclocking: disabled
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16)
cpu spread spectrum: disabled
sata spread spectrum: disabled
pcie spread spectrum: disabled
pcie clock: 100 mhz
sse/sse2 instructions: enabled
cool'n'quiet: disabled
adjust cpu vid: startup
extra cpu voltage: by cpu vid
cpu voltage 1.400v
memory voltage: auto
nf4 voltage: 1.50v
Thanks again. xpfshost

I'll do that, thanks. I guess I'm really mostly clueless about the following items:
memclock index value: 200mhz
row cycle time TRC: 8t
row refresh cyc time TRFC: 11t
current cpu clock: 1810 mhz
current ddr clock: 201 mhz
adjust cpu fsb frequency: 200
ht frequency: 5x
ht width: (down arrow 16/up arrow 16
pcie clock: 100 mhz
Do they look OK?? Thanks!
xpfshost
Quote from: Grayone on 19-April-07, 05:13:03
Change your user config mode in dram configuration to manual and change your memory timing to 1T. The 1T setting will speed up your memory slightly.

Any modded BIOS for Neo4-F MS-7125 (PCB 1.0)........???

Guys I was wondering if there is any modded BIOS for my Neo4-F (MS-7125) I have. I read somwhere that there is, probably the ,Murdoch modded BIOS....so if anyone can help me with the address.....Thanks a lot...

Thanks for the feeback
I did what the folks at MSI put in their BIOS Flashing instructions. I used the live update as stated and didn't get the desired result. I can't afford to have my PC down while I spend weeks chasing down obscure instructions that should have been included in the Flash Bios install procedure.
How would one know what to do to perform this miracle Bios Flashing? Can you explain what the /py /sn /wb /cd /cc /ld /e switches are for? Also, why would one clear the cmos or have to ""Load Optimized Defaults"" when no hardware or cmos settings have been changed? Also, what method are you suggesting with the command line awfl859g w7125nms.1d ???
Inquiring minds want to know.
Again thanks for the info.

Change procedure of BIOS "System S/N" for Ultra24

System board changed by trouble, but a value of "System S/N"
of the BIOS was "aaaaaaaaaa".
What do you do to change it?
Is it any command or tools?

Thanks so much

MOVED: Any modded BIOS for Neo4-F MS-7125 (PCB 1.0)........???

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=100654.0

Thanks for the feeback
I did what the folks at MSI put in their BIOS Flashing instructions. I used the live update as stated and didn't get the desired result. I can't afford to have my PC down while I spend weeks chasing down obscure instructions that should have been included in the Flash Bios install procedure.
How would one know what to do to perform this miracle Bios Flashing? Can you explain what the /py /sn /wb /cd /cc /ld /e switches are for? Also, why would one clear the cmos or have to ""Load Optimized Defaults"" when no hardware or cmos settings have been changed? Also, what method are you suggesting with the command line awfl859g w7125nms.1d ???
Inquiring minds want to know.
Again thanks for the info.

Best Drivers for new K8N Neo4 Platinum Ultra 7125-010

Looking for just a little clarification on which drivers to load for this board. It is on the way with my CPU and should be here tomorrow. In reading through some of the posts, it seems to be a good idea to load the most recent drivers right from the start and not even use the CD that comes with the MSI board. Below is a list of the Drivers which I "think" are needed.
Graphics Video Driver; 78.01
Nforce AMD Driver; 6.66
Audio Driver; 4.62
In doing some further reading, it seems I may need the following also but am not sure??
Windows XP Unified Driver; 5.10
Which includes the following:
Audio; 4.42
Audio Utilities: 4.44
Ethernet; 4.42
Gart; 4.36
Memory Controller; 3.38
SMBus; 4.04
Installer;4.46
IDE NVIDIA; 4.46
My plan is to setup the build with 1 WD 37.6 Sata drive as the boot drive and only the drive to start with. As for my Internet connection, I am going to use my USB Gigafast Wireless to connect to my D-Link DL-524 wireless router. I am going to Disable all of the onboard LAN features. Part of my confusion at this time is, do I need all of the Windows XP Unified Driver package??? Thanks in advance for any help in clearing up my confusion. Also, is there a specific order in which these should be installed??
Regards; Pop's

No problem Pop,besides,I'm 42 now and still love to build on my computer
As for the link,you need the "AMD Athlon™ 64 Processor Driver for Windows XP and Windows Server 2003 Version (exe) 1.2.2.2"
or the one just above it "AMD Athlon™ 64 Processor Driver for Windows XP x64 Edition and Windows Server 2003 x64 Editions Version (exe) 1.2.2.1"
It will uninstall the current driver that was installed with the mainboard driver cd,and should install the newer afterwards,you can check in hardware device manager if the driver version is the newer for cpu after reboot.
Haha,yes,I had the same feelings before I build this system,reading all msi forums regarding mainboards.
And all I read was problems after problems.But I have another system based on the KT3ultra,which I build 3 years ago,and I'm still pleased with this system so I decided to stay with MSI for now.Also I noticed the problems were/are the same on the Asus platform,seems common on nforce4 mainboards.
As for building,just take your time,I had a slight incident with placing the heatsink+fan on the cpu socket,apparently in the corners of the cpu bracket is a small ledge(Énglish is not my nature language so don't know if I use the correct word) ,I couldn't get the retention lever in place,needed a lot of pressure and I became scared of damaging things.
So I waited a few seconds and tried again,suddenly with a loud click,the retention lever fell in place,the heatsink was hindered by this ledge in one of the corners from the bracket.So you have to place the heatsink correct and don't overuse the pressure you need for the retention lever.Slowly increase it,and all will go well.
Also I noticed the pcie graphics card fell right over the retention clip that holds it in place right besides the northbridge fan(well,actually on the left side from the fan),so installed once,it's very hard to get your finger behind to replace the card for example,or to clean it out from dust.But I used a small tool to get behind and press the clip for card removal(a bended metal tool,so I need to be carefull using this)
As for sata drives,I started with an ide to be on the safe side,but I do know you need the driver floppy disks for using the sata drive.
Can't help you any further with that for now,when I buy sata2 drives no doubt I also will need to check if I need a bios update etc.But that's with a smooth system already running,so I can take my time and redo any steps I made if things fail.
That's why you need to do the correct order of installing software,it's much easier then to fix problems that may arise.
Well,goodluck and don't be afraid,just take your time.

Latest official bios for 980 gaming ?

I know, another thread, but please dont close it, im really noob at finding bios'es and looking on them.
So the official latest bios for 980 gaming is ? And if i flash it what im gonna get ?
Also i've heard people talking about "modded bios" whats a modded bios ? And if i flash it what i can really get ? Larger power limit ?
My card does fine at 1.237V and 1510mhz max boost.
Should i hassle with the bios'es ?

Quote from: CalinTM on 01-November-14, 21:55:11
I know man, i just asked if there is some other official bios available, and if its worth it to flash it.
Im not gonna flash anything. Just wanted to know the info if there is something etc. My card does just fine at 1510mhz.
I would be interested to know what afterburner settings you are using to get that speed? What GPU temperature is it running at under load?

When is going to be released official new bios for k9a platinum

Hi,
as I write in topic, when is going to be released new bios for k9a platinum?
thanks

That is a Kuma CPU and as such it is not and probably will not be supprted on your older MB.
Here is a list of MBs that support 7550 Kuma, 7750 it appears like is too new to be on any MSI MB CPU support list yet however it it should be supported on them as well.
K9A2 CF, K9AGM3-F, K9A2 Neo-F
K9N2GM-F V2, K9N2 SLI Platinum / K9N2 Zilent, K9N2G Neo
K9A2GM V3, KA790GX, KA780G-M
KA790GX-M, KA780GM-M, KA780GM
K9A Platinum >> CPU support << list

What's new in the BIOS Update v2.00 for Satellite L505-144

What's new in the BIOS Update v2.00 for Satellite l505-144
Thanks

Hi mate
As far as I know Toshiba European driver page does not provide any details what has been changed in the BIOS.
But I found some details on Toshiba US page.
It seems that Fn+N+1/2/3/4 debug function has been removed in BIOS 2.0 to avoid keyboard abnormal behavior.
Greets

Photoshop CS6 sous garantie : changement de plateforme Mac vers PC

Bonjour,
Je souhaite passer de Mac à PC et donc migrer Photoshop CS6 (Amazon) vers PC.
Vos services m'ont orienté vers vous. Merci.

Merci AndresBrA pour les n° de téléphones, je vais les contacter dans la
journée et je te tiendrai au courant.
Je me demande pourquoi je n’ai pas de n° de référence téléphonique dans mes
messages…
Je n’ai pas d’info. sur ma version achetée, je connais le prix : 950 euros
pour :
Détails de commandes :
PhotoshopCS6 (téléchargement) vendu par Amazon media EU S.à.r.l.
Etat : Neuf – Nouveau
Montant total TTC : EUR 950,00
Les deux messages reçus ne comportent pas de n° de téléphone :
Merci d'avoir contacté le Service Clientèle Adobe .
Comme précisé lors de notre conversation téléphonique, ce produit est
supporté par le Chat Adobe en français.
NB : Le navigateur Safari est connu pour empêcher le Chat de fonctionner
normalement.
Pour atteindre le Chat :
- Allez sur la page http://helpx.adobe.com/fr/contact.html
<http://helpx.adobe.com/fr/contact.html>
- Sélectionnez le produit .
- Sélectionnez "Téléchargement, installation et configuration"
- Sélectionnez "Téléchargement et installation"
- Cliquez sur le bouton　bleu "Encore besoin d'aide? Contactez-nous".
- Connectez-vous avez votre Adobe ID (votre adresse email et votre mot de
passe) sur lequel le numéro de série du produit est enregistré.
NB1 : Mot de passe oublié ? Cliquez sur "Mot de passe oublié"
NB2 : Si vous n'avez pas encore de produit Adobe, sélectionnez le produit
"Adobe Digital Editions".
NB3 : Si l'option du Chat n'apparait pas, testez un autre navigateur
(Chrome, Firefox, Opera, etc).
Bien à vous,
XXXX
Support Adobe
Bonjour Monsieur,
Merci d'avoir contacté le Service Clientèle Adobe.
Comme précisé lors de notre conversation téléphonique, ce produit est
supporté par le Chat Adobe en français.
NB : Le navigateur Safari est connu pour empêcher le Chat de fonctionner
normalement.
Pour atteindre le Chat :
- Allez sur la page http://helpx.adobe.com/fr/contact.html
<http://helpx.adobe.com/fr/contact.html>
- Sélectionnez le produit.
- Sélectionnez　"Téléchargement, installation et configuration"
- Sélectionnez "Téléchargement et installation"
- Cliquez sur le bouton bleu "Encore besoin d'aide? Contactez-nous".
- Connectez-vous avez votre Adobe ID (votre adresse email et votre mot de
passe) sur lequel le numéro de série du produit est enregistré.
NB1 : Mot de passe oublié ? Cliquez sur "Mot de passe oublié"
NB2 : Si vous n'avez pas encore de produit Adobe, sélectionnez le produit
"Adobe Digital Editions".
NB3 : Si l'option du Chat n'apparait pas, testez un autre navigateur
(Chrome, Firefox, Opera, etc).
Bien à vous,
YYYY
Support Adobe
De : AndresBrA <[email protected]>
Répondre à :
<[email protected]>
Date : vendredi 20 février 2015 10:30
À : C E <[email protected]>
Objet : Photoshop CS6 sous garantie : changement de
plateforme Mac vers PC
Photoshop CS6 sous garantie : changement de plateforme Mac vers PC
created by AndresBrA <https://forums.adobe.com/people/AndresBrA> in Forums
en français - View the full discussion
<https://forums.adobe.com/message/7213187#7213187>
En cherchant un peu, j'ai trouvé ceci sur les pages du support d'Adobe.
Toutes les configurations de produits, à l’exception des offres OEM, peuvent
faire l’objet d’un échange de plateforme ou de langue.
La page de l'aide semble dater de la CS2 mais c'est toujours en ligne!
>>>>>> >>>>> Vérifie si ta version ne Photoshop n'est pas une OEM, et si ce
>>>>>> n'est pas le cas, insiste au près du support en signalant le contenu de
>>>>>> cette page.. Essaye donc de lire calmement et attentivement la page du
>>>>>> lien ci-dessous et vois si tu peux y trouver une issue favorable à ton
>>>>>> problème.Commande de produit | Echange de plateforme ou de langue
>>>>>> <https://helpx.adobe.com/fr/x-productkb/policy-pricing/order-product-plat
>>>>>> form-language-swap.html> Informations utiles à fournir :
résumé de votre problème
type d’ordinateur utilisé—Mac ou PC ?
étapes de dépannage déjà effectuées
Appelez le :France: 01 71 23 01 96
Belgique: 027119960
Suisse: 044 800 9581Du lundi au vendredi, 9am—5pm CETJe dois dire que ce n'est
pas toujours très facile de s'y retrouver avec le support d'Adobe mais lorsque
je les ai contactés, j'ai toujours eu un bon accueil et solution (Support pour
la Belgique).Je ne peux malheureusement pas t'aider plus. Si grâce à cette
page du support tu as réussi à faire l'échange de plateforme, tiens nous au
courant. C'est toujours utile pour les autres utilisateurs. Bonne journée.
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7213187#7213187 and clicking ‘Correct’ below
the answer Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in your
message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7213187#7213187 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Forums en français by
email
<mailto:[email protected]ed.ji
vesoftware.com> or at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=2013> For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.
>

[P67-GD65 B3] Safe way to flash 4.2 official bios and why.

Hi all!
I am still trying to remedy my problem with too high (~1.43V) voltage while 4.5GHz OC (turbo or not) with "vdroop low" enabled. Now I am on 4.39 and it`s ok on (non turbo/manual x42) 4.2GHz and auto voltage (it`s ~1.288V while Prime, etc). I know that 4.20 official bios gives % vdroop settings. I want to try it to avoid my problem but I can not find 4.20 package ready to go with MSIHQ flasher. Actually all 4.xx MSIHQ versions go from 4.3x.
I am wondering if it is possible just to compress "valcheck.com" with 4.20 official bios file and throw it via Mode 1 to MSIHQ(?)
BTW: Maybe it (flashing 4.20) does not make any sense because "%" vdroop on 4.20 will not give me anything higher then "Auto" voltage settings. I think I need ~1,38V to get stable 4.5GHz. Any other ideas?
I could try manual voltage for CPU but I want to stay with energy saving c-states. I am using C1E with my non turbo OC.
I know You can find my problem a bit boring but maybe forum's Gurus could give me a green or red light(?)

Just to report!
Yesterday I finally tried to down-flash from 4.39 to 4.20 with MSIHQ. Risk taken Happily it was success!
But boy ... I should read carefully comments about 4.20 bios (grammar lost). I did not know that on this bios 100% vdroop is not ... How to say it? It is not 100% of "vdroop low" but rather 100% of "vdroop auto". So it not helped me with my main problem. I am now back to 4.39 beta bios.
BTW1: After some tests, I found that while on CPU voltage on "Auto" my CPU max voltage is ~1,29V (never more, it stabilize more or less from x40 multi CPU) while stress testing. Switching to "Low vdroop" I get above 1.4V just from x40 multi. Something is not right. It goes up with higher multi.
I tried to workaround this by Control Center. Switched to lower multi in bios, switched vdroop to "low" (voltage was OK and below the 1,4V line while stress testing) and then bump up multi in CC. Guess what ... Voltage was also bumped to the same (too high) values.
BTW2: I started to think that above problem may be my fault. From start with my P67-GD65 I experimented with OC Genie and maybe I switched some values or even reseted CMOS while using OC Genie (I know that was warning about it). I don't know, but maybe it damaged something and my motherboard behaves like this for good :/
I think that it is the end of my experiments. Bios 4.20 (% vdroop) was my last resort, but it failed.
Big thanks for all that tried to help me . It started 07-April-12:
https://forum-en.msi.com/index.php?topic=158139.msg1161554#msg1161554
I have to stay on x42 with ~1.288 voltage or go above x45 with more than 1.43V.

MSI K7T turbo2 MS-6330 bios ver 3.6..NEED SERIOUS HELP!!

Anybody plz help me.I own a mobo above running amd athlon xp 2000+. My system run well for one week. After dat, my system started to give me problem. It hangs one day and when i reboot my com, the message "Windows protection error. Please restart your computer" appears. I tried already many times to restarted my com..but still fails. So i think maybe RAM problem..so i try to remove and reinstall the RAM. Then my com succeed to boot into windows. Everything run ok..no problem for few days. Then suddenly my com hang again and I juz reboot my com. Then the same message appears again..May i know wat happened to my com.PLEASE HELP ME...:'(
My spec:
msi K7T turbo2 MS-6330 bios ver 3.6
AMD athlon xp 2000+
Asus v7100 Geforce 2 MX400
2x256 kingston ram(pc133)
2x20g maxtor hdd
1xTV tuner card
1XSb live soundcard

Try uninstalling the sound card and any other nonessential components. Also, when you uninstall click on the "show hidden" items and remove duplicates. Don't remove anything that you do not know exactly what it is including any marked "unknown" but if you see multiple sound cards or cd-roms, etc. remove them. Then see if you boot ok and gradually reinstall items.

Satellite L500 - Changelog in BIOS ver. 2.00?

Hi,
Does anyone know where I could find the BIOS change logs .. I am interested to know what changes were implemented in BIOS version 2.00 for the satellite L500 series?
A link or any info would be much appreciated ..
Thanks

Hey,
Can you see a BIOS changelog file on the Toshiba page where you can download the BIOS update?
No? Then the case is clear: There is no BIOS changelog file available.
Dont understand me wrong but thats fact
And let me give you a word of advice: Everything ok with your notebook? No problems at all? Then forget the BIOS update.
Never touch a running system! ;)

MS-7360 (P35 NEO-F) bios ver 1.10 + INTEL Q8400 CPU

hello
i cant find q8400 in the supported cpu list for this mainboard, however the q8300 cpu is in the list
i just need to make sure what 7360 (1.xx) is supported q8400 cpu, it is really weird - MB support almost all quads, but not q8400
upd.
is there any way to get codes of supported processors directly from the MB BIOS?
I ordered a processor from the store and until tomorrow I need either pay or cancel my purchase.

Quote from: Namistai on 20-January-11, 11:25:04
ok.
MS-7360 bios ver 1.1A (1.10) supports q8400. Everything fine, thanks.
Thanks for reporting back.

Which bios ver do i need

i have decided to flash my bios .. the thing is, i have a K8T Neo2 FIR motherboard and a athlon 64 3800+ venice core cpu
at the moment i have ver 3.3 bios
the ver 9.1 is for the k8t neo
is this the one i need for the neo2 fir?

Ty Tiresmoke
I have read through the sticky .. seems a few people have had a little trouble with other issues since flashing to a new bios .. but if i don't get that duel channel i'll never sleep easy.
i downloaded that version of clockgen and the agp lock does work. it was never a bios ver problem just a software one. the ver that ends in number 405 is the one to use.

Changes in Official Bios ver. 1.2 for Neo4 Platinum (MS-7125)

Similar Messages

Maybe you are looking for