Changes in page appearance after upgrade from 10.1.2 10.1.4

Hi. We upgraded our portal from 10.1.2 > 10.1.4 and I'm noticing that default portal pages are no longer picking up styles (things like the Login/Logout link, tabs, etc). Is this a sign that something went wrong in the upgrade, or is there an easy fix that I'm just not finding on Metalink/OTN?
Thanks!
Sabra

Sabra,
Not sure exactly what this might be... there could be an issue there.
Please make sure that you review the upgrade.log. Are there any errors / warnings?
Also, you might wanna peek the Metalink Note:262623.1 - Master Note for OracleAS Portal Upgrade Issues, where you'll find some nice things where to start looking at.
Later you may wanna open a Service Request into the Oracle Support.
I hope it helps...
Cheers,
Pedro.

Similar Messages

Invoice Receipt Warning Message Appear After Upgrade from 4.6C to ECC6

Hi Gurus,
We do upgrade from 4.6C to ECC6. And we do Invoice Verification base on Delivery (Vendor delivery number), in our business process there more than one Purchase Order has same Vendor Delivery Number while GR executed. But only one Purchase order related to Invoice verification, others PO are Free PO (no need Invoice Verification).
The problem is:
In SAP 4.6C, while execute Invoice base on Delivery (Vendor delivery), system automatic select only PO with Delivery (vendor) which related/allow invoice receipt.
In SAP ECC6, while execute Invoice base on Delivery (vendor delivery), all PO selected. So than there are warning messages appear (warning pop screen) for those PO not allow invoice Receipt (message M8035: PO item XXXXX does not allow invoice receipt), and at the end PO which allow Invoice receipt then appear for further Invoice Receipt process.
At overall, the final result SAP 4.6C and SAP ECC6 is same (only PO which allowed Invoice Receipt will processed further).
The Question are:
1. Why in ECC6 appear warning message, while in 4.6C no warning message ? Is there config to ignoring the warning message. I've try to maintain system message for M8035 (t-code: OMRM) to ignoring the pop screen, but can not created.
2. How do we make warning message dissapear (no need warning message), because if the PO's has hundred items so user need to click enter hundred times.
Thanks in advance.
Regards,
Tri Wicaksono

Hi,
could you please check whether the flag "GR-based IV" is set in the purchase orders?
If GR based-IV is ticked, then this pop-up cannot be suppressed.
If you would like to post the invoice first then GR-based IV should not be checked, otherwise this pop-up will always appear. I am afraid that this behaviour is standard.
Please, be aware that this feature is only available if you set in the Purchase Order item the 'GR-based IV' indicator:
   If the GR-IV flag is not set in the PO, then the system does not
   differentiate individual goods receipts. Please see the <f1> help
   for the field "GR-IV" in the PO item detail. Since the individual
   receipts are not differentiated, an invoice is not tied per se to
   an individual receipt and a goods receipt can be reversed despite
   an invoice receipt.
With the GR-IV flag set on in a PO, you can specify which goods
   receipt is being invoiced in an IR and which goods receipt is being
   reversed in a return. It is this correlation between goods receipts
   and invoices that enables you to specify for GR-IV PO's whether an
   item can be returned despite an invoice.
Please refer to the note :457511 Question 10.
Best regards
Erika

Help and Exit button appears after upgradation from External ITS to Integra

Hi All,
Though there some threads with similar problem but still I am not able to fix the problem.
After we upgraded from external ITS to Intergrated ITS some of the application started displaying "Exit" and "Help" buttons. Please note that most of the application are working fine though.
Kindly suggest.

Hi Edgar,
Thanks for the reply. Do I need to maintain this parameter from SE80 or from SICF? I had read in SE80 but it not help. I do not have authorization in SICF.
If it is to be done from SICF , please let me know.
Warm regards,
Aditya

Unable to get the login page after upgrade from 11.5.10.2 to R12

Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBA

Hi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA

Report Layout Changed After Upgrade from 4.6C to ECC6

Dear Gurus,
I do functional test of every process in ECC6 after upgrade from 4.6C. I found all report layout changed without variant (it's happen to all Query/SQ01 reports ). So I've to assign manually the fields for the reports, and create a default variant then.
Why it happen ? Is there configuration or setting missed or this is standard while we do upgrade ?
Thx in advance.
Tri Wicaksono

We do re arrange for all ALV report ...

The optimizer changed after upgrade from 8i to 10g

I have upgraded my Oracle database from 8i (8.1.7.3) to 10g (10.2.0.3). After upgraded, there's some SQLs are with performance issue that the response time is very slow. The SQL can run very fast (around 1 seconde) in the pre-upgrade environment. Also, after generating the execution plan, there's different from the original enivronment (8i) which the query using some full table scan instead of index scan originally used in 8i.
The optimizer_mode of 8i is RULE and it's CHOOSE when upgraded.
My questions are:
1. Do I have any init.ora parameters setting in 10g environment which differ from 8i?
2. What method of analyzing tables is appropriate to use in 10g? Will this affect the performance like my case?
Thanks,
Wai

Please have a look to following threads:
Re: Optimizer Statistics collection after upgrade from 8i to 10R2
Re: DB upgrade from oracle 8.1.7 to oracle 10.2.0.2

How to change table defnition after upgrade from 9 to 10 ?

after upgrade from 9 to 10, tables ddl still like 9i:
.................PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255..........
................ inndex PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS..........
Is there a method to convert it all tables to new 10g style without re-create thousands tables then emp/imp one by one?
Thanks

What do you mean by "10g style"? Do you want tables to be using ASSM? If that's the case, that's a feature of tablespace itself. So it means that your tables need to be in those tablespace which are having Segment Space management auto set in them.I don't think that there is any automatic package which can do the same on the fly.
One way ,which may not be very less time consuming but still can help is to convert the segment space management using EM.But again,this does recreate teh tablespace so I don't think that this is any different from exp/imp.
HTH
Aman....

The synth pad sound Warm Pad has changed after upgrading from Logic Express 7 to Logic Studio

Hello!
I have composed a lot of songs over the years using Logic Express 7, and my favourite synth pad sound there was a sound called Warm Pad (from the EXS24 Sampler).
A half a year ago I upgraded to Logic Studio, mainly because I needed WaveBurner. Happily, all my songs sounded exactly the same after the upgrade, except from 1 sound: The synth pad sound Warm Pad. It still got the same name and location, but the sound was replaced with a very sharp and much more distinct sound (not warm at all, in my ears at least).
I have tried to replace it with different synth pad sounds from the EXS24 Sampler, and the one I find to come most close to the old Warm Pad from Logic Express, is a synth pad sound called Pad 1. Still, I don’t think it sound exactly the same.
So, in order to finish all my songs and make an album, I ask you for help:
1. Do you know how I can get EXACTLY the same sound as the old Warm Pad Logic Express, with my new Logic Studio?
2. Have you experienced the same with sounds, after upgrading from one Logic version to a newer one? And what have you done to find back to the old sounds?
I will be VERY thankful for help, because I am not a genius in the mysterious (but yet exiting) world of synthesizer synthesis.
Best regards,
Asle
Composer, guitarist and entrepreneur
Norway

I have the boxed version of logic studio.
When you install, if you pick the "ad hoc" installation you can add the logic7 patches to your existing patches.
I think running installation again you should be able to install just that.

Error after upgrading from SOA 10.1.3.1 to 10.1.4.1 (commons-loging.jar)

After upgrading from SOA 10.1.3.1 to 10.1.4.1 , I cant run any Struts 1 pages from my web application.
I used to have "commons-logging-1.0.4.jar" under j2ee\<INSTANCE_NAME>\applib, and it worked fine before the upgrade, but after I upgraded I get this exception in the application log
11/02/20 18:50:17.31 ClientWeb: Error initializing servlet
java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2315)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
at com.evermind.server.Application.getHttpApplication(Application.java:586)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: No suitable
Log constructor [Ljava.lang.Class;@1c06a6d for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError
: org/apache/log4j/Category) (Caused by org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang
.Class;@1c06a6d for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:543)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:209)
... 20 more
Caused by: org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@1c06a6d for org.apache
.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category)
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:413)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
... 24 more
Caused by: java.lang.NoClassDefFoundError: org/apache/log4j/Category
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Class.java:2328)
at java.lang.Class.getConstructor0(Class.java:2640)
at java.lang.Class.getConstructor(Class.java:1629)
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:410)
... 25 more
11/02/20 18:50:17.31 ClientWeb: Error preloading servlet
javax.servlet.ServletException: Error initializing servlet
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4857)
at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4942)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1144)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:431)
at com.evermind.server.Application.getHttpApplication(Application.java:586)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
at java.lang.Thread.run(Thread.java:595)
11/02/20 18:50:17.31 ClientWeb: 10.1.3.4.0 Started
11/02/20 18:51:35.906 ClientWeb: Servlet error
javax.servlet.ServletException: Error instantiating servlet 'action'. Servlet class org.apache.struts.action.ActionServlet not found
in web-application ClientWeb
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.servletClassNotFound(HttpApplication
.java:4886)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4852
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication
.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler
.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler
.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler
.java:221)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor
.java:303)
at java.lang.Thread.run(Thread.java:595)
I tried moving this jar inside my war module, but problem still occures.
However, if I removed the jar "commons-loging.jar" from "OracleAS_1\webservices\lib", everything works fine!
Any ideas how to solve this problem??

It is an old post, but I want to add and ask something anyway:
I had the same problem and solved it through similar steps (didn't get the same errors and added the log4j to my project also) but don't you have the navigation problem?
Now that I have deployed the application the first page that appears after launching the application is my Home.jspx which is not the same page that comes up when I use embedded OC4J to run the application. The Home.jspx is blank and when I enter a link manually:
http://farbod:8888/TestApp/faces/pages/Employees.jspx
instead of http://farbod:8888/TestApp/faces/pages/Home.jspx
I get this error:
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
I also tried changing the initial address throughout the application:
<% response.sendRedirect("faces/pages/Home.jspx"); %>
but I still get the above error.
Thanks,
Farbod

User metadata values is showing as plain text in Mysites after upgrading from 2010 to 2013

We have upgraded our Mysite from 2010 to 2013, after upgrading User metadata values is showing as plain text where
as in 2010 it has shown as hyperlinks.
In Mysite 2010 by clicking on user metadata for favorite sports, Favorite Movies etc...it will give the results from search containing same value for other user
by going to search results page. After upgrading it to 2013 (with 2010 UI) and running full crawls, I am able to search by clicking on any user property.
After upgrading look and feel to 2013 version these fields showing as plain text. Can anyone suggest how can we get hyperlinks and how can we make user
metadata searchable directly by clicking on Property value from Mysite. Below screen print explain you the difference clearly.
Santosh

Hi Inderjeet, thanks for the update.
I am running with SP1 + july2014 CU.
Search is working fine, I am able to get search results from search page, here the problem is I cannot go to search results by directly clicking on a property.
In SP 2010, If I click on favourite sports team, (Chelsea football) it will open search results page with all users who have given this team name.
Where as in SP 2013, this data is appearing as plain text in mysites(Please note before UI upgrade, I am able to search as in SP 2010). You can notice the difference in my above screenshot.
Is this default behaviour in SP 2013? Has anything changed or am I missing something.
Santosh

ERROR upload: Error in uploadXMLFiles after upgrading from 10.2.0.4

After upgrading from 10.2.0.1 to 10.2.0.4 on a newly installed Oracle server, I could not use dbconsole any more. It would not display the login page at http://myserver:1158/em. I tried different browser IE, FireFox, and Chrome. It is the same. Then I checked the %ORACLE_HOME/{server_sid}/sysman/log/emagent.trc and found this errors in it:
2010-02-04 14:11:45 Thread-2552 WARN command: Job Subsystem Timeout set at 600 seconds
2010-02-04 14:11:45 Thread-2552 WARN upload: Upload manager has no Failure script: disabled
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovering left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN upload: Recovered 0 left over xml files in upload directory
2010-02-04 14:11:45 Thread-2552 WARN metadata: Metric collectSnapshot does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric Disk_Path does not have any data columns
2010-02-04 14:11:46 Thread-2552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
I tried emctl secure, upload, start and stop many times. It is still the same. It is a new server and a new database. Any idea?
TIA!

I did not change password. It is not password issue.
According to Oracle support,
1) the error "2010-02-04 14:11:50 Thread-352 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds" can be ignored.
2) The error: 2010-02-05 02:52:19 Thread-3864 ERROR util.files: nmeufile_remove D:/oracle/product/10.2.0/db_1/orsvp04.OCTAGONRESEARCH.COM_vp/sysman/recv\00000000365.lk: Error in lfidlb. Error = 0 (No error)
could be because I used "emctl start agent" , which are not allowed command for DBconsole. The correct one is "emctl start dbconsole"
Thanks for your input!

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?
The issue is they type but there is 2 second delay when it appears in the field.
Windows 7 64bit

I see, I misread your reference to Reader 11 to mean you were using Acrobat 11, but it looks like it worked out anyway.
The base-14 fonts are special in PDF because they are guaranteed to be available even if they are not embedded. If you select a non-base-14 font for use with a form field, the entire font usually gets embedded, since each glyph it contains has to be available for use with the field. This can take up a lot of space if you do this a lot, and the space isn't reduced if you change back to a base-14 font later because the internal reference to it is not removed. This is caused by the bug I mentioned.
In your case, however, the entire font doesn't get embedded because fonts like it (e.g., large asian fonts with a lot of glyphs, Arial Unicode) would take up too much space if fully embedded. If it did, a 100KB PDF could bloat to 20MB with that one change. Instead, users are expected to have such fonts installed on their system, which is why you were prompted to install the font pack. This despite the fact that the font was not actually used by anything in your document, it was simply the orphaned reference to it that triggered this. This should get fixed in Acrobat eventually so this type of thing doesn't happen again.

Smartview reports do not open in HFM v11.1.2.1 after upgrade from v9.3.1.

Smartview reports when I attempt to open in HFM v11.1.2.1 (after upgrade from v9.3.1), points me to launch v9.3.1 workspace. Any advise pls... Thanks, Mark

Mark,
I still don't fully understand the issue. Smart View is not launched from Workspace -- it is instead run from within one of the Microsoft Office products (Excel, Word, PowerPoint, Outlook). Are you instead asking about Financial Reports? These are run from the Explore menu within Workspace. You can view these as html or PDF.
A little more confusing is the fact that Smart View can run a Financial Report from within any of the Office products. In any case, when you use Smart View in 11.1.2.1 you could open a connection to the Workspace server (the connection in Smart View is defined in the Smart View options under Advanced > Shared Connections URL). Assuming you have provided a correct URL there, pointing to the 11.1.2.1 workspace server, you should see the available shared connections when you open a new conenction.
I re-read your e-mail and wonder if you are confusing things a bit. If you log into Workspace, using Internet Explorer, each user has their own preferences as to what page launches by default upon login. I think you are saying that a usr logging into the 11.1.2.1 workspace somehow has a default page leading them back to the 9.x workspace? If so, check their preferences to examine the default document and it's URL. Once logged into Workspace, choose File > Preferences > General, to view the Startup page. You can make any changes here, but this is user-by-user.
--Chris

Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Changes in page appearance after upgrade from 10.1.2 10.1.4

Similar Messages

Maybe you are looking for