Changes in poduction order,routing not updating in product cost estimate

Dear SAP Gurus,
i had done mto thru sale order and done some changes in production order,routing,and not updated the standard costestimate  of newly updated can anybody tell me the procedure of updating the routings and production  orders after production order released .
pls help me the standard cost estimate how to get updated while changing the routing,production order.
regards,
muralidhar putta

Hi Muralidhar,
Could you please share with us how your problem was resolved. It may help others too.
Thanks,
Manjula.S

Similar Messages

  • MRP-Delivery Schedule for Sales order is not updating in Production order

    Dear Experts,
    I have created Sales order and maintained delivery scheduling, Then Run MRP through MD50,
    We received Planned order then through this we have converted to Prodcution order.
    When we observe the delivery schedule for sales order under assignment Tab in Produciton order which is showing zero instead showing line item of Delivery schedule.
    I am able to see Sales order and Line item but i am not abel to get any delivery schedule line item.
    Please suggest where settings are missing.
    Thanks in advance
    Regards
    Don

    Dear Experts,
    Please provide me solution.
    after Running MD50 transaction against Sales order.
    If I maintained different Scheduling Line Item for First Line item of Sales order.
    The Respective Scheduling Lines should update against Each Production order which has converted from Planned order.
    Thanks in advance.
    Regards
    DON

  • GR Cost not updating as Target Cost for process orders

    Dear SAPians,
    We are facing an issue in Target Vs Actual cost reporting for process orders. We are creating a process order after cost estimate of that material and doing the confirmations for activity cost. After that, GR has been done for the finished goods of that process order. That GR entry is updating the Actuals values but not updating the Target cost. When I am checking the standard report KKBC_ORD, I am getting the following figures.
    Cost Elemnt Text     |     Target Cost     |     Actual Cost     |     Target Vs Act
    Inventory Chnge FG     |     0     |     1,472,205.60-     |     1,472,205.60-
    Packing Matrl Cons.     |     1,148,142.37     |     1,252,752.68     |     104,610.31
    Raw Material Cons.     |     60,463.91     |     50,688.29     |     224.38
    Semi-Fin Matrl Cns.     |     181,934.68     |     367,959.56     |     186,024.88
    Labour Cost Activity     |     39,735.36     |     39,862.80     |     127.44
    Machine Cst Activty     |     41,611.75     |     43,153.01     |     1,541.26
    That 'Inventory Change FG' entry is showing the GR posting updating actuals and not target cost. This is causing huge difference in target vs actual cost that will affect the profit and loss figures ultimately.
    What am I missing here? What should I do to update the GR amount in Target cost as well.
    Shirazi

    Dear,
    Target Cost on Production Order or Process Order is shown only when Variance is Calculated.
    So please calculate the Variance, system will show the Total Target Cost.
    Br,Vivek

  • Payment documents / Payment orders were not updated in RFFOEDI1 Program

    Hi,
    With F110 transaction i'm  printing Payment summary and Remittance form by using YDFI_RFFOEDI1 ( Copy of RFFOEDI1)
    Program variant.
    Spool is generating Payment summary and Remittance form along with Error log as below.
    Program YDFI_RFFOEDI1: No records selected
    The following payment documents/payment orders were not updated
    (Result of the payment document update)
        CoCd Payment document/Payment order
        1019 F110000001
    The accompanying payment media have not been generated
    YDFI_RFFOEDI1 Program variant is having Generate SAP Idoc check box as unchecked under Print control tab.
    Thanks
    Bhuvana

    Please help me on this issue

  • Error in MR11: One or more purchase orders were not updated

    Dear Gurus,
    While posting MR11 for a account assigned purchase order i'm facing a error as "One or more purchase orders were not updated" under message ID CKMLGRIR 003.
    Diagnosis: An error occurred during the update. As a result, an entire processing package of purchase orders could not be cleared.
    I checked with the PO and it looks correct.
    What may cause this issue? I'm using 4.6C release.
    Thanks in advance.
    Regards,
    RathiM

    Please check the SAP note below  :
    843022  MR11: Error log, purchase order number is missing

  • Actual activity price not updating in production order

    Hi All,
    I am facing one problem, that actual price for activities are not updating in production order while plan price are updated. Earlier both plan and activity prices were getting upadated but now actual price is not updating for any material. I have tried at the same material also but it is not getting updated. Actual hours are updated in confirmation of production order but not price. If somebody could suggest the reason it will be great.

    Dear Nitin,
    Thanx to all for valuable input. Problem is solved.
    Nice to see That your problem is solved
    But Can you let the Forum Members know
    where was the exact problem & how it is solved
    Regards
    Madhu Kumar

  • Sales order is blocked for Delivery-ZH Cost estimate Req

    Hi experts,
    When I am saving the sales order I am getting the informative message standard cost estimate for material xxxx is missing. when i am creating delivery with reference to sales order  it is not allowing me to do delivery it is showing that Sales order is blocked for Delivery-ZH Cost estimate Req( in  a log). Can you pls let me know what configuration I have to check.
    Regards,
    Sunina Agarwal

    hello, friend.
    it looks like product costing has been activated in your environment.  if such is the case, you would have to coordinate with your FICO consultant, and they have to make the necessary standard cost estimates.
    please also check if the cost estimates are part of the incompletion procedures.  if it is, you would not be able to bill the transaction even if this is taken out of the incompleteness procedure.
    regards.

  • Work order should not update the fields in PR

    Hi  Gurus
    My requirements is that workorder should not updates the purchasing data fields in PR  do not go to the shoping cart. How can make it possible.
    Thanks in Advance

    Hi,
          I am not sure of your requirement clearly but check up the below user exits :-
    COZF0001 Change purchase req. for externally processed operation
    COZF0002 Change purchase req. for externally procured component
    or BADI :- IWO1_PREQ_BADI BAdI for Manipulation of P.Reqs from Orders + Networks ,SE18
    regrds
    pushpa

  • Open quantity in Sales Order did not update after cancelling Reserve Invoice

    Client created Credit Memo with reference to Reserve Invoice but this did not update the open quantity in Sales Order. Client is using SAP B1 8.82 PL9. I tested this in SAP 9.0 and still same behavior. Is there a work around other than creating another SO?
    I checked Document Settings and "Reopening Doc by creating credit memo based on Doc" is enabled.
    Thanks in advance.

    Thanks for the reply. How will the client be able to make new reserve invoices from the SO? They are trying to make partial reserve invoices from the sales order. I already suggested to just change the quantity in the reserve invoice before adding. But I have doubt because the SO might close prematurely before they complete the quantity in the SO because open quantity is much less then the quantity in SO.
    SO Quantity: 100
    Open Quantity: 40
    Reserve Invoice 1: 60
    Reserve Invoice 2: 40
    SO closes before they can make Reserve Invoice 2

  • Exporting catalog, making changes, then importing catalog does not update file movements and deletions

    I export part of my master catalog to a laptop.  I include the image files so I can edit the files at full res.  After managing and editing files I import the catalog back into the master catalog. When importing I check to replace metadata, develop settings and negative files. I have been running some tests to be sure all my work is being captured in the master catalog by this process.  I find that if I change develop settings or photo ratings this is detected when the file is imported and the data in the master catalog is updated properly.  The surprise is that if I delete files or move files among folders in the exported catalog these changes are not detected and these changes are not updated inthe master catalog.  It seems bizarre to me that such changes are not detected but I do not see how to get LR to recognize these changes and include them in the catalog update.  Without this capability I don't see how to use catalogs to move part of a catalog to another computer for edits and file management and then move back to the master catalog.

    There are various reasons why Lightroom works this way, but you'll need use pick flags to indicate photos to be deleted, and other metadata like colours or collections.

  • Open orders should not update in MD04

    Hi, SD gurus,
    I have the below requirement,
    My business scenario is
    when  total open sales order quantity crosses a particular number(Ex:1000 Pcs) in a month, after that whatever the sales order we create it should not update in MD04.
    Our Business process,
    1. Creating a sales order
    2. Allocation run (here system will execute Credit check, availability check, and listing an Exclusion etc. here we need to enter sales order no, plant, allocation type)
    3. Creating a delivery
    4. Invoicing the customer
    Note:
    Usually when we de check MRP type and allocation in Scheduline category system should not update in MD04, but if we de check this as for our business process system should  not execute Allocation run
    Thanks in Advance
    Yuvaraj.

    Respected Lakshmipathiji,
    Thanks for your clarification but i have query here..
    ""if the users are ready to do this manually once a line item exceeds 1000 pcs a month, well and good""
    How users will check material wise?(suppose if sales order contains more than 100 line items and each line item will have its own requirement updates--will they do this material wise?)
    Is there any report which give the Status on Requirements for group of materials(MD04 status) in Standard SAP??
    Phanikumar

  • Price change in Schedule agreement but not updated in CDHDR and CDPOS

    Hi Experts
    We have change price in  SA ,please see the below screen shot. But these changes not update in CDHDR and CDPOS. We can see current rate in ME33L.
    Please guide how to update these changes.
    Regards
    Parkash Chand

    Generally in standard, the changes logs are saved into table CDPOS and CDHDR.
    Its working fine in my system.
    Can you see the changes log with regards to document number by running program RSSCD200.
    Go to SE38 or SA38, enter the program RSSCD200 then press execute.
    Enter * in object class and enter the document number
    Then press execute. You can find more details into the wiki content Steps to enable logging of changes in change documents - Code Gallery - SCN Wiki

  • Purchase Order history not updating in my STO

    Dear Experts,
    We are doing stock transfer order internally for FERT and *BOUGHT OUT * items. Now at the time of delivery through VL10B all bought out items are appear in outbouddelivery but FERT item material is not coming automatically in delivery.  System pickes up item category as NLN but if i manually added FERT material at the end system picks up item category as ULN & purchase order history also not updated in STO.
    Also in MD04 system is showing reservation against STO number & the result is i am not able to do delivery because system is showing message as only 0 qty is available for picking
    Can any body helps me in this?
    Thanks
    Trupti

    Hi,
      Define your item category setting for your Delivery..
    Under SPRO>Loge-Exce>Shipping-->Define item category determination in Deliveries.
    Note: You should not enter the line item manually in delivery, thus it will store the item category as DLN  (DLN is for without order Reference) so it wont record any history.
    Regards
    GK..
    Edited by: Gnana Kumar on Oct 26, 2010 1:04 PM

  • Transfer Order Confirmation not updated in Header level (Table: LTAK)

    Hi,
        We are facing a problem, transfer order header is not updated with confirmation, but TO items are confirmed and resulting these transfer order to display in RF monitor (LRF1 and LRF2 transactions).
    And the other issue is, we are seeing some transfer orders created without item data (in LTAP table) and unable to confirm these TOs since Item data is not available, hence TO header is not updated with confirmation and resulting these TOs to display in LRF1 and LRF2 report.
    I have cleared some transfer orders by updating the confirmation field in LTAK table through debugging. But we see the issue is ongoing and would like to have permanent solution.
    It will be a great help if anyone have solution to these issues.
    Thanks & Regards,
    Nagarjun

    Hi Nagarjun,
    do you have any Z code in-between ?  Did you check OSS notes ?  Did you apply all patches to your system ?
    What you are describing is something usual when Z programs were developed, you should provide more details for analysis.
    Many thanks,
    Enrico

  • Purchase Order History not updated properly

    Hi All,
    The Purchase Order History is not updated correct.
    Scenario:
    The  Invoice is created ( MIRO) with Amount : 1001 USD but in PO History it displays 1000 USD.
    The Tolerance is 1 USD ...My Requirement is that it should display 1001 in PO History.
    Thanks and Regards
    Mahesh

    The Actual Bill Value is 1001 USD.

Maybe you are looking for