Changes in Production version

Hi,
Can somebody tell me where can i see the changes made to a production version.
One is in...Material master-->enviornment->display changes
Is there any table where i can know the changes made to a production version.
Thanks in advance
Anshul

Dear Goyal,
Changes related to Production version can be viewed as you
said by you or else use T code MM04 to display the changes.
The changes made to a Production version cant be checked
using any tables.
Regards
Mangalraj.S

Similar Messages

Change the Product version from ECC to ERP 6.0

Hello Experts
I am planning to apply EHP4 on my Development ECC system. In line with the the suggestion from guide "How to install SAP Enhancement Package 4 for SAP ERP 6.0" system I am supposed to define my ECC system with leading product version ERP 6.0.
My Ecc system is currently defined with Product version SAP ECC 6.0.
As per the above guide and also suggestion from "Note 1344564 - Maintenance Optimizer: Check system landscape" which says-
"In particular for a system of the product SAP ERP, assign the product version of SAP ERP, not SAP ECC."
I am supposed to change the leading product version to ERP 6.0.
Now with the current definition of system with product version SAP ECC 6.0, it is being used in a logical component. In order to change this I need to delete the associated logical component. The problem is -this logical component is being used in more than one Project definition that has huge documentation associated with them.
My question -
will the deletion of current logical component affect my documentation in any way?
How can I change the product version from SAP ECC 6.0 to SAP ERP 6.0 without affecting the current setup?
Regards
Dhiraj

Hello Warren,
Thanks for the suggestion.
I have already taken care of all the suggested notes in the master note that you suggested. I am able to generate the XML file for other solution defined in my system. In those I have my ECC system defined purely as ERP 6.0 system. I am not able to make out why its not generating the XML for this solution.
Regards
Dhiraj

Change Production version during creation of Process Order COR1

Hi,
Scenario:
Based on the entered Material, Plant and Order type system need to trigger a popup asking the user to select the Production Version. This should happen before clicking on SAVE button, so that all the values will be populated correctly based on the changed VERID.
I did not find a user exit that enables to change the Production Version (VERID) value. So I thought of displaying the popup in the user exit EXIT_SAPLCOZF_003 which will be triggered before initial screen appears, export the selected value and pass it to a User Exit or BADI where VERID can be changed. But cannot find a user exit to do it.
Please help me find a User Exit or BADI to change the Production Version during creation of Process Order using COR1 transaction before clicking on SAVE button.
Thanks,
Manoj.

Hi Manoj,
So - almost four years later - I saw your post and I saw myself in the very same situation as you did...
I found a solution for those who wants to change the production version of the production order from the sales order creation: create an enhancement in the function module 'MD_VERSION_SELECTION' and you are good to go.

Change product version under application component

Hi all,
how can i change the product version under application component at integration scenario?
You have the possibility to "Display/Change Application Component" if you click with your mouse (right button) on the application component bar but under application component type you aren't able to change anything.
Thanks in advance!
Jochen

Hi,
You cannot change the product version.
When you Righ Click on the Application Component and say change, the only things that you can change are
1. Role,
2. Integration Process
3. Further Attributes.
if you need to change the product version, you need to Right Click --> Insert Application COmponent and then select the correct product version.
Regards
Bhavesh

PPM not getting created when ECC Production version is changed

Hi,
We are facing a problem with PPMs.
We changed the Production version in ECC for the corresponding Material in ECC from 5000 to 6000.
We then ran the RSPPMCHG and then generated and activated the PPM Integration Model.
No queues inbound (APO) or Outbound (APO) were blocked. \
The result was that the 5000 PPM was deactivated in APO but we could not find the 6000 PPM version anywhere.
Can anyone please help??
Regards
Abhishek Sahi

Hi,
Refer notes 448085 PPM Transfer: Tips and Tricks
Aslo after generating and Activating the IM, run the report RSPPMCHG ( Tcode - CFP3)
Thanks,
nandha
Edited by: S.Nandakumar on Oct 8, 2010 10:05 AM

Production Version in Material Master

Hi,
I am having problems with this.
I need to either change date on a production version or
delete the product version.
I have tried using a batch input sequence from my program both for changing the date
and for deleting the production version and this all works well.
Now this isn't good enough since there can be multiple production versions on a material
and I don't know which line to change or delete in the batch run.
Is there a good FM or BAPI to handle this?
I don't want to change the MKAL table directly since there is a history table
connected to this also (MKAL_AEND).
What is the best approach?
Rgds,
/Fredrik.

How can I use this to achieve what I want to do, either
change the production version date or delete the production version?
I have tried C223, but this is not good enough, nor is batch run in MM02.
I can have multiple production versions and can not pick the correct line
in batch run to change or delete.

Product version inconsistent with software components

Hi,
after upgrading our sandbox from 4.6C to ERP 6.0 EHP4 SP06 i've changed the product assignment in SMSY and fetched the new data using "Read System Data Remote". Now there are two problems:
1.) Read System Data Remote shows error message S:032:000 trying to fetch data using RFC. No more explanations or long text. Although data is been read and updated and RFC test connection is ok.
2.) The related system shows exclamation mark "Product version inconsistent with software components". The product version is SAP ERP 6.0, Product Instance is SAP ECC Server. Now i tried "Change Product Assignment" and "Clean-Up Inconsistencies". This results in a list of "Inconsistent Database Assignments" like "Product: SAP ERP" and "Product Instance: SAP SRM-Server". Nothing i can change here. I'm confused as i haven't defined SAP SRM-Server anywhere just SAP ECC-Server.
Any ideas about 1.) or 2.)
It seems to me that Solution Manager doesn't make life easier in the first.
Thanks.

Miguel,
i have checked note 1165438 but can't see how this should help. The technical usage is correct and there is only one specified which is ECC / Central Applications. Still SMSY complains about SAP SRM-Server and more.
Let me say that the system was defined as 4.6C before the upgrade and that we used Solution Manager to download all required packages for ERP 6.0 EHP4 SP06 which worked fine. The problem is as said before that after changing the product version to ERP 6.0 there are inconsistencies shown on the product assignment page (inconsistent database assignment) for SAP SRM-Server, SRM-Catalog, cProject Suite, Workforce Management, E-Recruiting, NW-Business Intelligence, NW-Process Integration, SEM, SRM-Server ECC AddOn, SRM Catalog Content, NW Mobile Infrastructure, FSCM-FSCM Server (ABAP), Application Platform-IPC and Learning Sol-Frontend ABAP. Never heard about them nor specified them anywhere.

Product Version SAP ERP 6.0 Missing from solman 7.0

Hi All,
I have installed an ECC6 system and now i need to configure the solution manager and download the support packs
and xml file for EHP4 upgrade. I have done this before where in i configure the new system in SMSY as SAP ERP 6.0
and then configure maintenance optimizer and it gives me the option of Enhancement Package Installation.
However now in the current solution manager i dont see the product version SAP ERP 6.0 when im clicking
trying to creating a new system.
Our Solman version is 7.0 . I tried creating my new system under SAP ERP EHP as ehp version 1 and used maintenace
optimizer but it does not give me the option of EHP package installation. Can any one let me know how to address this
issue??
Regards,
Ershad Ahmed.

Hi,
Goto Tcode SMSY
1. Under Landscape Components --> Product Systems --> Select ERP --> Under that select your system ID and click on it,
Goto --> Header Data on your right side, change the Product Version to SAP ERP 6.0 and SAVE.
2. Goto System Groups and Logical Components --> Logical Components --> SAP ERP --> Create NEW Logical Component for your ECC system under this component and select Production version as SAP ERP 6.0 & assign ur system then SAVE.
3. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and REMOVE your ECC systen form the Solution and SAVE.
4. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and ADD your ECC system form the Solution and SAVE.
Regards
Kannan.K

Manual selection production version during order creation

hello!
i have setup production orders that during order creation the production version has to be selected manually. this works fine in CO01 and CO40. but in CO41 the production version is determined automatically - where would i change that setting?
best regards,
matthias

Dear Matthias,
In my understanding it is not possible in standard SAP.
If you have manual selection of production version and if you have set the BOM selection method as 2 in
MRP 4 view of the material master then,
1.If you create a production order manually then the system displays the pop up to select a production
version.
2.If you are converting the planned order into a production order then it picks up the one which is
present in the planned order.So obviously if 2 production versions are there with same lot size and
validity dates,then the system picksup the first one only during MRP run.
Even if it picks up the first prod.version in planned order,but while converting click on master data and
change the production version if required.
3.Otherwise what you can do is set the production version in MD61 itself ,so that its going to be
considered during MRP run and same will be included in the planned order.
Check and revert back.
Regards
Mangalraj.S

Create production version

Hi,
we use ECC 5.0 and APO 4.1. For APO we need production versions. My problem is to create or change the production versions of a material, every time the appropriate routing or BOM is created or changed in ECC.
There no suitable userexit in routing. Somebody told me to do with events and workflow. Can anybody tell me, how to do this on events routing-create/routing change and bom-create/bom-change.
regards Joerg

Function module CM_FV_PROD_VERS_MAINTAIN is used by transaction C223 to create/change production versions in dialog mode. Are you looking for a function module or BAPI that will allow you to create/change production versions without screen dialog? If so, I don't believe there is such a BAPI. I thought maybe BAPI_PO_CHANGE might be useful, but according to <a href="https://websmp202.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012003146900000252192005">Note 828538</a>, "For technical reasons, you cannot transfer the production version to the BAPI. However, as of SAP Release mySAP ERP 2005, you can influence the BOM components using the BAPI (complete recreation of the BOM or merging of the BOM components)."
- James G.

Production version of planned order

When the planned orders are generated in PP/DS, I want to change the production version of certain planned orders. However I cannot find out where I can implement the enhancement. Anyone can help me? Thank you very much.

Hi Rui.
During order creation, you can use either
BAdI /SAPAPO/PWB_SOS, Method PWB_USEX_SOS (internal table CT_SOURCES_EXTEND)
or
BAdI /SAPAPO/RRP_SRC_EXIT, Method RRP_USEX_SOURCE_FILTER (internal table CT_SOURCES)
to sort the available sources of supply or to filter those that are unwanted.
Regards,
Tiago

CO41 and production version

I am converting planned orders to production orders using CO41. Is there a way I can get the production version field to appear on the CO41 output screen so that like other fields I can change it before pressing the 'convert' button
thanks a bunch

Dear John,
In my understanding it is not possible in standard SAP.
If you have manual selection of production version and if you have set the BOM selection method as 2 in
MRP 4 view of the material master then,
1.If you create a production order manually then the system displays the pop up to select a production
version.
2.If you are converting the planned order into a production order then it picks up the one which is
present in the planned order.So obviously if 2 production versions are there with same lot size and
validity dates,then the system picksup the first one only during MRP run.
Even if it picks up the first prod.version in planned order,but while converting click on master data and
change the production version if required.
3.Otherwise what you can do is set the production version in MD61 itself ,so that its going to be
considered during MRP run and same will be included in the planned order.
Check and revert back.
Regards
Mangalraj.S

Different fix lot size depending on the production version

Hi all,
I have the next scenario:
2 production versions. 2 different fix lot size por each. So:
Prod Version 1 - Fix lot size 200
Prod Version 2 - Fix lot size 300
I created the Quota Arrangement just to make SAP to take my favourite version. And trought the quota, I can define the lot size for each version. BUT.
If I change the version in the order or in the planned order, the quantity don't change.
So: How can I manage 2 different fix lot size for 2 different product versions? If I change the version once the order is created, how can I do the system change de quantity to the right one?
Thanks in advante
<< Please do not offer points >>
Edited by: Rob Burbank on Oct 1, 2010 2:53 PM

I have n't tried this scenario,
This is my Idea
Create a two production version
for ex: lot size 100 to 1000, set the rounding profile qty as 1000
for lot size 1001 to 99999, set the lot rounding profile value to 5000
BY this way u can get the two lot based on the rounding profie
Expert; please correct if i am wrong
Edited by: Sundaresan . E. V on Oct 1, 2010 4:12 PM

How can i get production version value(verid) for luck through bdc.

HI..
i have one requirement..that in c223 tcode while i luck the production version through BDC in my report program as i given bellow...i upload mat.no , plant, production version and 1(for luck)...
req:: i want while i given production version for particlular plant and material no...that production version should be luck....
so in standard tcode c223 how can i get value to compair it with my input production version value then i will close that...
program:::
report ZC2232
       no standard page heading line-size 255.
*include bdcrecx1.
Tables : mkal.
data : nodata value '/' .
data : CTUMODE type c value 'E'.
DATA : CUPDATE TYPE C VALUE 'L'.
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
data: begin of HEADER OCCURS 0,
data element: MATNR
        MATNR_001(018),
data element: WERKS_D
        WERKS_002(004),
data element: PLNNR
       PLNNR_003(008),
data element: CP_STTAG
        STTAG_003(010),
data element: ENTRY_ACT
       ENTRY_ACT_005(011),
data element: PLNAL
        PLNAL_004(001),
data element: FLG_SEL
       FLG_SEL_01_006(001),
data element: PLANTEXT
       STLAL_004(002),
       DATUV_005(010),
data element: WERKS_D
       WERKS_008(004),
data element: PLN_VERWE
       ktext_005(001),
data element: PLNST
        DELKZ_005(001),
data element: LOSGRVON
       LOSVN_011(017),
data element: LOSGRBIS
       LOSBS_012(017),
data element: PLNME
       PLNME_013(003),
data element: PLNME
       stlal_014(002),
end of HEADER.
data : begin of it_header occurs 0,
       matnr like marc-matnr,
       werks like marc-matnr,
       verid like mkal-verid,
       mksp like mkal-mksp,
       end of it_header.
data : exnum(40) type c,
       exnum1(40) type c,
       cnt type I,
       CN(2) TYPE C,
       c1 type c value '(',
       c2 type c value ')'.
start-of-selection.
parameters: p_file like rlgrap-filename.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
importing
     file_name           = p_file.
start-of-selection.
call function 'WS_UPLOAD'
exporting
CODEPAGE                      = ' '
   filename                      = p_file
   filetype                      = 'DAT'
HEADLEN                       = ' '
LINE_EXIT                     = ' '
TRUNCLEN                      = ' '
USER_FORM                     = ' '
USER_PROG                     = ' '
DAT_D_FORMAT                  = ' '
IMPORTING
FILELENGTH                    =
tables
    data_tab                      = it_header
EXCEPTIONS
CONVERSION_ERROR              = 1
FILE_OPEN_ERROR               = 2
FILE_READ_ERROR               = 3
INVALID_TYPE                  = 4
NO_BATCH                      = 5
UNKNOWN_ERROR                 = 6
INVALID_TABLE_WIDTH           = 7
GUI_REFUSE_FILETRANSFER       = 8
CUSTOMER_ERROR                = 9
NO_AUTHORITY                  = 10
OTHERS                        = 11
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
DELETE it_header WHERE MATNR IS INITIAL.
LOOP AT it_header.
*start-of-selection.
*perform open_group.
perform bdc_dynpro      using 'SAPLCMFV' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTE'.
perform bdc_field       using 'BDC_CURSOR'
                              'MKAL-WERKS'.
perform bdc_field       using 'MKAL-WERKS'
                              it_header-werks.
perform bdc_field       using 'MKAL-MATNR'
                               it_header-matnr.
perform bdc_dynpro      using 'SAPLCMFV' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PICK'.
perform bdc_field       using 'MKAL-WERKS'
                             it_header-werks.
perform bdc_field       using 'MKAL-MATNR'
                            it_header-matnr.
*>>>>>>>>>>>>>>>>>>>>here what logic can i write****
clear cnt.
do 15 times.
cnt = cnt + 1 .
CN = CNT.
exnum = 'MKAL_EXPAND-VERID'.
concatenate exnum c1 cn c2 into exnum1.
*perform bdc_field       using 'BDC_CURSOR'
                               exnum1.
GET PARAMETER ID 'VER' FIELD EXNUM1.
CALL TRANSACTION 'C223' AND SKIP FIRST SCREEN.
if ( it_header-verid = EXNUM1 ).
exit.
endif.
enddo.
****************************************************end***>>>>>>>>
perform bdc_field       using 'BDC_CURSOR'
                              exnum1.
perform bdc_dynpro      using 'SAPLCMFV' '2000'.
perform bdc_field       using 'BDC_CURSOR'
                              'MKAL_EXPAND-PLNTY'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PRFG'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_OKCODE'
                              '=RW'.
perform bdc_dynpro      using 'SAPLCMFV' '2000'.
perform bdc_field       using 'BDC_OKCODE'
                              '/ECANC'.
perform bdc_field       using 'BDC_CURSOR'
                              'MKAL_EXPAND-VERID'.
perform bdc_dynpro      using 'SAPLCMFV' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'MKAL-WERKS'.
perform bdc_field       using 'MKAL-WERKS'
                              it_header-werks.
perform bdc_field       using 'MKAL-MATNR'
                              it_header-matnr.
perform bdc_dynpro      using 'SAPLCMFV' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_transaction using 'C223'.
endloop.
*perform close_group.
*&      Form bdc_dynpro
      text
     -->P_0161   text
     -->P_0162   text
form bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
endform.                    " bdc_dynpro
*&      Form bdc_transaction
      text
     -->P_0351   text
form bdc_transaction USING TCODE.
call transaction 'C223' using bdcdata
                         mode    CTUMODE
                         update CUPDATE
                         messages into messtab.
if sy-subrc <> 0.
message e000(zmm01) with
'Check your input data'.
endif.
endform.                    " bdc_transaction
*&      Form bdc_field
      text
     -->P_0346   text
     -->P_0347   text
form bdc_field USING FNAM FVAL.
if fval <> nodata.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
    endif.
    endform.                    " bdc_field

l_nl := dbms_xslprocessor.selectNodes(l_n, '/TaxInvoice/TaxInvoiceDocument');try to change as follow
l_nl := dbms_xslprocessor.selectnodes(l_n,'/TaxInvoice/TaxInvoiceDocument','xmlns="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0"');Edited by: AlexAnd on Aug 17, 2011 12:36 AM

Vendor name is deleted after the approver changes the product category.

Hello,
We have implemented workflow WS14000044(Completion by Purchaser) and
WS14500015(Item-Based Main WF).
At workflow WS14500015 level, when the approver changes the product
category, the vendor name is deleted.The previous validation allows the
PO creation , But the PO is created without vendor.
Furthermore under transaction process purchase orders 'BBP_POC' the
purchaser can not access in change mode to the vendor field in order to
add a vendor.
How can we give access in change mode to the vendor field for purchaser in transaction 'BBP_POC' ?
Regards,
Lina

Hi,
Which SRM version are you working on?
Please see if the foll notes help:
<b>801591 Source determination after item change</b>
881346 Vendor incorrectly deleted
873972 Sources of supply in the shopping cart with catalog items
908178 Transferring reference: Deleted vendor
Note 829652 - Completion workflow in shopping cart: Vendor
789087 Changed product category: Vendor not deleted
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Changes in Production version

Similar Messages

Maybe you are looking for