Changes in Signature text not carried forward to the next server

Hi All,
I changed the Signature TExt in Global Server.
I need to transport this to development server.3
After moving the transport, no chagnes are updated in development.
I moved the transport 3 times.
Please help me in solving this problem.

Hi
Signature texts needs to be maintained by opening the client , these will not be tranportable.....
Please check the export & import process once again..
Regards
Suresh

Similar Messages

  • EAP Response frame is not always forwarded to the Radius Server when doing Full Authentications.

    We have seen issues with a Cisco 5500 and 2405 WLAN controller with older and the latest controller firmware(8.x) of not forwarding the first EAP Response frame to the radius server on 802.1x WLAN devices doing full authentications. The first EAP Response frame from the WLAN client is supposed to be forwarded to the Radius server but a Wireshark trace shows that frame is never sent by the WLAN controller. The WLAN controller does ack the first EAP Response frame but the EAP response frame when the problem occurs always seems to be a retried packet.   I do have all RRM and AP scanning turned off. This is an intermittent issue and only occurs on devices doing full authentications and does occur on multiple vendors products. This produces a 18-20 second drop-off until the station recovers by sending an EAP-Start frame and then it associates properly. Since the first EAP Response frame is never forwarded to the Radius server and the EAP Response frame is being ack’d on the retried packet, this seems to be a WLAN controller issues but I’m looking at all possibilities. Does anyone have any thoughts?
    I attached a wireless and wired trace of the issue. See the Readme.txt file in the attachment for specific information.
    Thanks in advance.

    Do you have a packet capture to see this ? If so pls attach it
    Rasika

  • Task not forwarded to the next level

    Dear All ,
    I am having an issue in SRM Shopping Cart approval workflow. The scenario is that the SC has to be approved at 3 levels and after getting approved at the first level the task does not get forwarded to the next level and its unable to fetch any , whereas there are users mainateined and i can see the approvers being fetched when I tried executing the BADI ( BBP_WFL_APPROV_BADI),unfortunately this is the isolated case as its working fine for all others. I guess this rules out oll other poosiblities of agent determination logic, task's agent assignment, swu_obuf , or swi1_rule. I am sure something is wrong with the user attributes but not able to zero to the root cause. Any help will be highly appreciated.
    regards
    C S Anand
    Edited by: Santosh Anand on Oct 1, 2010 8:11 AM

    Hi,
    Search this forum for answers: SAP SRM: Workflow & User/Vendor/Org Management
    Also, if you can replicate it on the dev environment.Change the WF-BATCH user temporary to dialog and place an external break-point in the badi implementation for WF-BATCH user.
    Now create a shopping cart and check in debugging what causes it to not retrieve agents.
    Kind regards, Rob Dielemans

  • Balance not carried forward when changing fiscal year in Report Painters

    Hello guys,
    Im using report painter (FGI3) to create my financial statement report, when i change to fiscal year 2009, the balance in my balance sheet is not carried forward to year 2009, its only shows the the movement.
    Assume, the total asset in dec 2008 is 10million, transaction in januari is -900.000,
    the total asset in januari 2009 should be 9.1 million, but it only shows -900.000
    Sorry my english not so good
    Anyone can help..
    Thanks.
    Edited by: rama dazkia on Feb 2, 2009 3:16 AM

    Thanks for the reply,
    I've already doin the year-end activities, if i see the balance in F.01 it is correct
    but in my report painters especially in january 2009, it only shows the difference
    FYI, i using report painters FGI3, FGI5
    Thank you

  • G/L account balance not carried forward next year

    Dear All Expertise fourm,
    I found in my report(S_alr_87012277) some G/L account is not carry forward into 2009 from 2008. But in 2008 there has balance.
    It should come in 2009 "Bal carried Fwd". I had done some process for this but nothing change.
    I did block input G/L account from FS00
    I execute program RFSEPA01
    But not any change.
    Can anybody advice me?
    Thanks & B/R
    Bishnu

    Hi
    Do the Balance Carry Forward once again, some times it may not CarryForward the Balances.
    Balance Carry Forward for General ledger -->F.16/FAGLGVTR
    If New GL is activated kindly do with FAGLGVTR
    Regards
    Venkat

  • SFTP Receiver adapter error Message could not be forwarded to the JCA adapter

    Hi Experts,
    I'm needing help to solve a problem with an SFTP Receiver interface.
    Before I was sending in the adapter configuration as "Direct" in Write Modus (File .txt) and now I changed to "Use temporary file" is occurring this error:
    Message
    could not be forwarded to the JCA adapter. Reason: 2: Moving
    /ABCftp/To_XXX/140187613515701OUT_20140604-100214-622.TXT.tmp to /ABCftp/To_XXX/01OUT_20140604-100214-622.TXT failed.
    Files as TXT they are being written to the SFTP however when as TMP returns this error ... would not rule SFTP server to accept different TXT files?
    I also changed the namespace to "http://sap.com/xi/XI/System/SFTP" and "http://sap.com/xi/XI/System/File" but is not working.
    Any help will be welcome!
    tks.

    Hi Durga and Naveen...
    I believe the problem is when the application's legacy system picks up the file because the log file got the "tmp", ie, was not formed yet ...
    I changed to a directory without the intervention of the legacy application and it worked.
    I'm waiting for the opportunity to modify the legacy system to capture only files with the extension TXT.
    Tks All for help!

  • Text overflown is not getting printed in the next page in ADOBE

    Hi Experts,
    I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
    I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
    Please help me regarding this.
    Thanks & Regards,
    Karthik MD

    Hi Lohitha,
    Even "Expand to fit" is been enabled.
    Thanks & Regards,
    Karthik MD

  • Text overflown in the first page is not getting printed in the next page

    Hi Experts,
    I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
    I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
    Please help me regarding this.
    Thanks & Regards,
    Karthik MD

    Hi,
    This issue is in ADOBE, I think there is no concept of Window in ADOBE,
    The text box is placed inside a Subform.

  • Message could not be forwarded to the JCA adapter

    Dear all,
    I am facing the issue:
    i am trying to send files to sftp server via SFTP adapter but in the receiver channel I am getting this error:
    Message could not be forwarded to the JCA adapter. Reason: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed.
    exception caught with cause javax.resource.ResourceException: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed.
    Adapter Framework caught exception: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed.
    Delivering the message to the application using connection SFTP_http://sap.com/xi/XI/SFTP failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: 3: Putting /folder1/folder2/10124__20140603-152747-700.txt failed..
    I am not able to keep the files in folder2.
    there is no problem in access rights.
    I am able to access the same from Putti but from channel i m unable to do so.
    Please help.

    Hi Sinha,
    Thank you for the response, I might not have written the issue correctly.
    Remove Spaces in EDI Files
    Please refer the above blog, we are facing a simmilar issue, when we remove those spaces the file works correctly. But when the files are transmitted we have a single stream of characters and there is a space after the IEA segment and the next ISA Segment.
    Regards,
    Pranay

  • I create an enterprise project template in Project Professional but when I go to create a project in PWA the formattting does not carry through to the project

    Hi
    Project Server 2010
    I created an enterprise template in Project Professional and formatted it and set the font to Gill Sans MT, I then pointed the Project type to this project template.
    When I created the new project type in PWA the formatting and font did not carry through to the new project.
    Has anyone seen this behaviour before?
    Kind regards
    M

    Do you find that if you create a project in project professional using a template and then save it the formatting is shown OK? So you only see this problem when you are creating the project from PWA and the plan template is picked up via the Enterprise Project
    Type?

  • Why did they change itunes. i do not like it. miss the album scroll

    why did they change itunes. i do not like it. miss the album scroll and ablum cover in bootom corner.

    I love the new version of Grid view but some of the other changes feel like they still need some fine tuning. And I miss cover flow even if I didn't use it that often...
    You can restore much of the look & feel of the previous version with these shortcuts:
    Ctrl+B to turn on the menu bar
    Ctrl+S to turn on the sidebar (your device should be listed here as before)
    Ctrl+/ to turn on the status bar
    Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
    Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
    Should you still feel the need to roll back to iTunes 10.7 first download a copy of the 32 bit installer or 64 bit installer as appropriate, uninstall iTunes and suppporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
    See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
    tt2

  • I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, until the next time I need to use it and it does not get recognized again. Is there any fi

    I am going crazy changing passwords that do not get recognized by the different services when it is time to use them, until I am asked to change the password again, starting the vicious cycle again: i need to use the password, it does not get recognized three times, then the system asks me to change it again, and again, and I am stuck!! Is there any fix for this "glitch?

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • Table Problem x2 within Pages: 1) In the Header; 2) Maintaining a table's starting point when carrying over to the next page.

    Pages '09 v4.1
    Problem 1:
         I am working with a 2-column Page document. Its my goal to have three items listed in a header in particular positions. Far left shows the paragraph number the page starts with, in the center is a title of the contents of the page, and on the far left is the last paragraph number to appear. To place these three items in the desired positions requires the insertion of a lot of spacing on both sides of the 'centered' title along with counting the characters of the title to find its center to alighn with the center of the page. 253 pages of this to will qualify me to be labled with a severe case of Obsessive Compulsive Disorder. I don't want OCD.
         However, by installing a one row/3 column table in the header my task was made a lot easier in alighnments. But, another problem reared up. Within the header underneath the table is a vertical space remaining. This vertical 'tallness' is equivalent to the font size of 10. Its taking up too much space between the header and the text. It needs to be reduced or eliminated.
         On the left-hand page I am able to reduce the font as far down as '1'. I've settled on using '3'. However, on the right-hand page the font will not accept any size selections be they less or more and remains stubbornly at font 10. Within a Header that does not have a table, I am able to change the font of both left and right pages.
         Is there a another way to approach what I desire for the header other than installing a table in it? Is there a way to alter the font on the right hand pages?
    Problem 2:
         Whenever I create a table following text already on a page all is right until the table's growth in construction laps over to the next page. At that point the first row snaps to the top of the following page leaving an undesired area (space) between the last line of the text on the preceding page. Whenever I attempt to drag the table to the desired position it snaps back. This only happens when the table is larger than the remaining area of the page. If the table is started at the top of an unused page and runs beyond the confines of that page than it continues as expected onto the next page duplicating the table header. But to do this it must begin at the top of an unused page. Is there a means to have a table placed in the remaining space of a page and what does not fit continues to the next page in effect having a partial of the table on each page?
    So there you have it. Christmas is over and its back to work. Thank-you for your attention.

    Regards re-positioning a table:
    I went to Inspector>Wrap>Object Placement/Inline (moves with text) and found that the inline option was selected. Some of the rows within the table have two lines of text. Again, I dragged the table to the desired position on a page that is partially composed with text and got the same results as before -  the table snapping back to the top of the following page where it initially resided. In this current position the 2-page table does break as it should on the following 3rd page. Below is a schematic of the appearance of the 2-pages involved.
    Page 1 left side.
    TEXT 1-line as 1-column
    TABLE (5-rows)
    TEXT (2-columns) 14-lines left column and 13-lines right column.
    [Layout Break] otherwise the above textual columns would be all on the left side of the page.
    TEXT 1-line as 1-column
    * The desired insertion point for a two page table on a page that is 40% filled with the above descriptions.
    Page 2 right side.
    A 2-page table flowing or breaking into a 3rd page.
    Page 3 left side.
    The overflow of the subject table.
    [Layout Break]
    [Section Break]
    Is there some other way to anchor a table to the text other than Inspector>Wrap>Object Placement/Inline (moves with text)?

  • Header not getting  displayed in the next page in the second table

    Dear Experts ,
    I have a query regarding Header not getting  displayed in the next page in the second table of the main window. .Let me elobrate the issue.
    I have a smartform in which there are  2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is  for future delivery date P O separated by text in between.
    Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
    Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
    Please provide a elobrate solution on this problem as the requirement is urgent.
    Thanks,
    Regards,
    Sachin Hada

    Hi Sachin,
    you need to cteate two pages FIRST and NEXT.
    in first page --> FIRST
        next       --> NEXT
    in next page
      page---> NEXT
      next ---> NEXT.
    you copy the first page main window is the same in next page
    aslo
    I think help ful for you
    thanks & Regards
    BHUPAL.

  • My IPod will not automatically advance to the next song.

    IPod will not automatically advance to the next song. I have updated and restored. The Shuffle has the two arrows crossing which I believe means it should be advancing. Any suggestions?

    While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat (the right hand side features the Shuffle feature). You want to make sure this icon is white (meaning it is set to Off). If it isn't, tap it either one or two times to change its current setting.
    Any luck there?
    B-rock

Maybe you are looking for