Changes in SpeedGrade do not apply to Clips in Premiere

Hi there,
I have edited three commercials from ProRes4444 material.
I have color corected these in SpeedGrade. so far so good.
Then i made minor adjustements in editing and mastered the sound.
Now as a last step i wanted to finetune the colorcorrection.
I can open the project in speedgrade an it remebered the cc from before, but if i make any changes now and send them back to premiere they simply won't apply to the clips, they remain with their first color correction.
I don not suspect that i still see pre rendered clips in the premiere timeline, as i rendered out a test without using the previews already, and still no change in color correction there
Can anybody please help me out here?

I only have cs6 .. so everyone knows what that is... going to SG as dpx and or xml etc.
One of the things important, I think, regarding color stuff and basic out of camera corrections is that there is a wide range of people who feel that color correction is pre edit and grading is post edit. There are lots of threads on internet about this subject..
Basically , if you wanna get your source material close to what you intended ( and here you can use grayscales and color stuff you shoot at heads of shots ) you do that before edit..
takes time and is pain to do but is good starting point..
then you edit and do what you have to do in order to 'grade' .. so initial color correction is pre edit , grade is post edit ... and the workflow follows that criteria more or less...
I know this doesn't influence the workflow of this thread but it might be cool to keep in mind ... ??

Similar Messages

Any changes on SCCM console not applied

Hello,
We have stand-alone primary site based on System Center 2012 R2 Configuration Manager, suddenly I notice that any changes occur in console is not applied for example I change local admin password in task sequence, remove computer from specific collection
but no changes applied.
Plus on System status I didn't found any component monitor.
I notice that backup SQL maintenance task was stopped because Symantec net backup client was installed, after removing the client I could initiate SQL backup by starting the service.
Anyone receive such issue ?
I'm going to check SQL, because it's look like changes are not stored in database, maybe SQL logs are full or something like that, if any one have an idea please share it with me.
Thanks
Abduljalil Abolzahab

@Narcoticoo
Thanks Narcoticoo
Actually I found errors in smsdbmon.log files such as
Failed to connect to the SQL server, connection type: SMS ACCESS
A network-Related or instance-specific error had occurred while establish a connection to SQL server. Server is not found or not Accessible.... etc
SQL installed with the same server.
I checked services and found that SMS_EXCUTIVE was running under local account and status is "Stopping" I change the account to Site admin account then restart and everything is working fine.
Thanks again
Abduljalil Abolzahab

Video FX not applying to clips

Hi all - yesterday I exported a clip from Flash as a quicktime movie, imported it into a new project, then brought in some other existing clips. When I tried to add Video FX to the other clip, in the preview it looked fine, but when I hit "apply", the clip would either turn to black or take the image from the following clip. I tried this with several different FX and got the same results. I saved the project and shut off imovie, then last night, I powered the computer down. This morning, I am getting the same resuts, even with existing movies I have already made!!
I attribute this behavior to me adding some demo FX that I installed yesterday. Today I took all of the demo plugins out of my imovie library. After doing this, I am still getting this problem. It is like I have messed up my native FX by installing these demo FX.
Does anyone have any suggestions how I can clean this mess up or what I am doing wrong?

FYI - I went into my library an deleted all imovie preferences files. This solved the problem.

GPO not applied at all with build 9926

Hello,
I have a Samba 4 Active Directory Domain controler. My LAN is composed of XP and 7 computers ; everything works well.
I also have tested previous builds of Windows 10, and had no particular problem with Group Policies.
With build 9926, my GPOs are not applied at all. It seems there is a big change making Group Policies not applied / not reloaded when users log in. Here are step by steps what I have noticed :
0) At the very first log in, when I do a gpresult /V, i have a message saying something like "no rsop data for this user"
1) I performed a gpupdate /force
2) I performed another gpresult /V and then I got information about my GPO
3) I logged out and logged in with same user --> my GPO is applied
4) I modified my GPO to set new policy
5) I loggged out and in again --> old policies are applied but new policy is not applied
6) I performed gpresult /V --> new policy is not displayed
7) I performed a gpupdate /force and then a gpresult /V --> new policy appears
8) I loggged out and in again --> All policies, including the new one are applied
So it seems the GPOs are not automatically updated and applied when logging in, and I have to force them manually.
The good question is : WHY ? :)
Thanks
Will

Hi Will799114,
I tested this in my environment, it seems a restart would apply group policy successfully, but a sign out and sign in would not trigger this procedure.
Here I would suggest you post your feedback directly to our Feedback channel:
http://windows.microsoft.com/en-in/windows/preview-how-to#how-to=tab7
Alex Zhao
TechNet Community Support

Changes are not applying

I have made a couple of changes to a movie and they are not applying in the canvas.
EG - I have changed the colour of some text that appears. The preview icon on the clip in the timeline has changed the colour of the text, the preview in the viewer has changed, but the canvas hasnt. Also it isnt asking me to render which it usually would.

You can quickly force a render by lowering, then raising the opacity of the clip. There are also more involved/complex ways to replace a render.
-DH

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

SBS 2011 GPO for changing the default save path applying to Win7 but not working

So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
Thanks in advance.

When a group policy is not applying, it is often that it has been linked to the wrong OU. Please first check this.
You might also check the apply status on the client site based on the GPSVC.log.
How to enable GPO logging:
http://blogs.technet.com/b/csstwplatform/archive/2010/11/09/how-to-enable-gpo-logging-on-windows-7-2008-r2.aspx
It looks more like an issue on server side than an issue of Office Group Policy settings. Try to post in Server forum and see if there is any luck:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver

Changes are not applying to the reports

hi all
i have moved the RPD and catalog file to UAT there i got few changes
i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
so i again i copied same RPD and catalog to UAT now it is working fine,
why the changes are not applied to the reports that i have moved to UAT
is it mandatory to move RPD and catalog to the other environment ??
Thanks

Hi,
if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
If not you need to deploy RPD and catalog into UAT.
By,
KK

Why when i make changes to songs in my itunes library and then sync, the changes do not apply on my ipod?

When i go to edit songs in my library, like changing the artists name or album, i then click sync and look on my ipod and the changes have not applied. I tried clicking the manage music manually box and to edit the songs manually from my ipod and still when i edit them and make changes on my actual ipod the songs are still the same. Any help?

I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

Folder Redirection policy is not applied to a user, when the server target is changed, but works after resetting the windows profile.

Folder Redirection policy is not applied to a user, when the server target is changed.
After server target is changed via group policy, when user login (roaming profile)first time, the the new server target has not been applied, instead it's pointing to the old folder redirection path.
But if we reset the windows profile (roaming ), the new folder redirection works, can you please specify a solutions that the new folder redirection works when the user login for the first time. so it reduce the time on resetting users profile.
it seems that we need to delete the old folder redirection path from the user profile (roaming user profile) via group policy or similar solutions..
Many Thanks

> But when the specific users login they all get the same error, it
Is the old server removed from the domain? Seems so - or some other
authentication related issue, hard to tell from here...
> seems that the roaming user profiles still keeps the old server details,
Yes - if you change redirection targets, FR moves content from old to
new, and only if this ends sucessfully, it will update the redirection
target.
Make the old redirection target accessible to the user and you'll be fine.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem b

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Changed column order not applied to interactive report

Hi,
I've changed column order for interactive report.
But it is not applied.
How can I solve this issue?
Thanks,
Guy

Hi Guy
It depends on where you have changed the column order. If you change the column order using the 'Select Columns' function when you click on the 'Wheel of Magic', then it should work.
If you are changing the column order from the Interactive Reports Attributes page then this will only affect the column order for non displayed items and the single row view.
I hope that helps
Shunt

Why is the SmoothCam (smooth cam) filter not applying to an exported clip?

I have a clip that required some masking (which my graphics guy did on his PC). After importing the masked clip into FCP, I can't get the SmoothCam filter to apply to it. SmoothCam works great on the original shot from the camera (an MXF file), but not on the clip after it was "tweaked outside" of FCP.
Does anyone know if SmoothCam has a limitation on what types of files it will work on (ie only raw footage files, MXF files, etc) or is there perhaps some metadata in the raw file that's needed for SmoothCam?
We had tried exporting a smoothed version before I gave it to him for masking but he couldn't open it on his PC (don't get me started on that! haha).
He did a wonderful job on the masking (using AfterEffects) but the clip still requires the SmoothCam. And SmoothCam is working just fine (I can still apply it on "raw" clips). But when I try to apply it to this "outside exported" clip, it just doesn't do anything...no error, no indication of analyzing the clip or even trying, nothing at all happens.

I apologize. I posted this question a little prematurely. After looking through the FCP manual, I found this quote:
+Note: The SmoothCam filter can be applied only to clips that refer to QuickTime+
+media files. Also, the SmoothCam filter compensates only for the original video+
+within a QuickTime media file; the results of filter and motion parameter settings are+
+ignored. Make sure filters applied to a clip are ordered so that the SmoothCam filter+
+is applied first.+
I decided to post this reply in case anyone else came across this issue. Basically, it appears that SmoothCam will only work on QuickTime files (.mov I guess?). My graphics guy had made the file as an MP4 (again..don't get me started I opened the his MP4 in QT and re-exported it as a .mov and SmoothCam is analyzing it right now! So all is well.
Sorry for the almost unnecessary post. Feel free to comment to expand/clarify my findings.
Thanks!

OCT MSP File Not Applying Changes

Hello All,
I am trying to use an msp file to apply some settings changes; e.g. add and remove a new Normal.dotm, themes, Outlook defaults, etc. When I edit the file, everything entered in correctly. I have tried using a batch file and manually running the
msp file and still nothing. I'm getting a little frustrated as I don't understand why it's not working. I use a similar msp file for a new deployments and the configurations get applied. Why doesn't this one work? Any help would be
greatly appreciated.

Some settings/features within the OCT, are only applied during the initial installation of Office, and do not apply/update an existing installation of Office.
It's not well documented which settings behave like that, but if you review the TN library documentation for Office customization, there is mention of that limitation.
On a test machine, if you remove Office (uninstall it), and then reinstall it whilst referencing your updated/revised MSPfile, does it work ok?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do you change the background color not of the video clip, but the background the clip is on?

How do you change the background color upon which the clip resides...
I don't want to change anything within the clip itself, but the matte(?)
from black to white or cream.
I am working with Elements 10...

Create a color matte of the desired color and place it on video track 1. Then place your video on track 2.
from here: Adobe Premiere Elements Help | Creating specialty clips
Create a colored matte for a background
You can create a clip consisting of a full‑frame matte of solid color, which you can use as a solid background for titles or animated clips.
Brightly colored mattes can serve as temporary backgrounds to help you see transparency more clearly while you adjust a key effect.
Click Project Assets.
In the Project Assets panel, click New Item from the panel options and choose Color Matte.
Choose a color in the Adobe Color Picker dialog box, and click OK.
A color matte clip is placed into both the Project Assets panel and the Expert view timeline.

Changes in SpeedGrade do not apply to Clips in Premiere

Similar Messages

Maybe you are looking for