Changes in tables

Hi all,
I need to notify a non-SAP system of every change made in some customizing and master data SAP tables. The system must be notified on-line as soon as the change is saved (without XI). Any ideas?
Thanks

Yes its possbile. For standard check if there is any Change Document Object Defined. For Custom you will have to define the Change document thru SCDO Tcode.
Once the change documents are generated You need to create the change pointer tables thru BD52 transaction, again for Custom table you will have to write change pointers manually by Using Change pointer function modules like CHANGE_POINTERS_CREATE, Then schedule the RBDMIDOC to create the IDOC from change pointers.
Refer [this|https://help.sap.com/saphelp_nwmobile71/helpdata/en/2a/fa018f493111d182b70000e829fbfe/content.htm] for more information.
There are significant efforts achiving it all.
Regards
Shital

Similar Messages

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

How to change the table's for an existing report

Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
Abhishek

In the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl

How to find out the top ten Change log tables in BW

I want to know the top ten change log tables in terms of size. Do we have a SAP standard table where we have the following fields : "changlog table name", "number of records" field or "data in size" field.
Regards,
Prashant M J

Hi,
Click on change log table in the ODS/DSO at the top you see the name as /bic* which is the name of the database table which could also be seen at SE11.
If you wana see the requests in this change log use rstsodsrequest
and if you wana see the size in terms of kb, mb DB02 or st04
use the table name /bic* and click on tables and indexes option in history tab
DB02 tells you the sizes of the tables present on database. Incase you are not able to your basis team would help you in that
Thanks and regards
Kiran

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

Dynamically changing internal table in 'gui_download'

Hi Experts,
                 i have to download 4 internal tables, each with different structures, to the presentation server using 'gui_download', based on which radio-button is selected in the selection screen. I am hoping to use a single 'form' and 4 'perform' calls. how can I dynamically change the tables in the 'gui_download' function modules.
plz help.....................

Hi ,
Build the field catalog dynamically based on the internal table structure based on the radio button selected.Use the dynamic internal table generated from the filedcatalog and use in GUI_DOWNLOAD.
See the below code:
*& Report ZRAJESH02
REPORT zrajesh02.
Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
              <dyn_wa>.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
      it_fldcat TYPE lvc_t_fcat.
DATA: lv_monate TYPE f,
      lv_months TYPE i,
      lv_date TYPE sy-datum,
      p_check1 type n value '1'.
lv_date = sy-datum + 360.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_check TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis   = lv_date
      i_datum_von   = sy-datum
      i_kz_incl_bis = ' '
    IMPORTING
      e_monate      = lv_monate.
lv_months = lv_monate.
PERFORM f_fcat USING 'AUFNR' 'CHAR' '12'.
PERFORM f_fcat USING 'POSNR' 'CHAR' '06'.
while p_check1 LE p_check.
PERFORM f_fcat USING p_check1 'CHAR' '1'.
p_check1 = p_check1 + 1.
endwhile.
PERFORM build_dyn_itab.
LOOP AT <dyn_table> INTO <dyn_wa>.
    WRITE:/ <dyn_wa>.
ENDLOOP.
FORM f_fcat USING fieldname dattyp length.
DATA:wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = fieldname.
wa_it_fldcat-datatype = dattyp.
wa_it_fldcat-intlen = length.
APPEND wa_it_fldcat TO it_fldcat .
ENDFORM.                    "f_fcat
*&      Form build_dyn_itab
      text
FORM build_dyn_itab.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data.
wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'AUFNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 12.
APPEND wa_it_fldcat TO it_fldcat .
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'POSNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
APPEND wa_it_fldcat TO it_fldcat .
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
ENDFORM.                    "build_dyn_itab
Thanks,
Rajesh.

How to get the Reports of Change Tracking Table in MDM?

Hi!
Please tell me how to get the reports of Change Tracking Table in MDM which is a System table, directly from MDM without using any interface.
Thanks in advance for the reply.
With Best Regards
Devendra Pandey

Hi Devendra,
MDM can track changes on tables and fields. <u>The level of change tracking, and which tables/fields to track, are configurable in the MDM Console</u>. MDM opens a new database on the same database engine as the MDM repository and writes all change records to this database.
For information of various steps you can visit
<a href="http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/content.htm">this URL</a>
Regards,
Krutarth

Changing the table name while drill down at the dashboard query

I have a DAY fact table that has about 1B rows.
The purpose of this table is to store on hand quantity for each item per day.
On the presentation layer I have a dashboard that will display average on hand qty per year and then user can drill down to quarter/month/week and then by day level to see the actual value at evey level.
Its hard to run aggregation on fly as all my 3 TEMP tablespace 32gb each filled and then I get error can not extent TEMP file.
So I thought I will do the aggregation at the database level and store the aggregated data in another table. So at first dashborad will read this new aggregated table to display qty at yearly. As soon as user drill down to quarter the dashbord should query the actual DAY fact table by filtering for specific year and quarter.
IS it possible? Can I change the table name while I drill down to lower level?
Thanks in advance.

Hi use,
Yes. This is possible in OBIEE. You need to use Action Links to have navigation between reports. The main idea is to have 2 analysis. One with your aggregated data by year (using your aggregated table), and another one with the rest of the hierarchy and data (using normal fact table)
You add an action link on this report, that can navigate to the second report. showing "the details" (in your case would be the rest of the time dimension).
Please refer to http://www.rittmanmead.com/2010/07/obiee-11gr1-action-framework-and-conditions/ for actions links.
Another way is to create 2 analysis, then go to the 2nd analysis, and filter the column year as "Is based on results of other analysis" and you select there the first analysis. In this case when you click on the year in the first analysis, this value will be passed to the second analysis so you can filter the rest of the hierarchy based on the year you clicked on the first analysis.
If helpful, assign points.
J.

How to get the Change Log Table name of the ODS from the system table

Hi,
I have a list of ODSs in the system and I am interested in finding the corresponding Change Log Table and the number of records in that table.
Can any one please tell me the name of the system table where this information is stored.
I dont want to get in this information manully (from the Contents tab of the ODS maintenane).
Regards,
Harikiran Gunnala

Hi
Go to SE16
Give the table name as "RSTSODS".
For User application field give CHANGELOG as input
and execute. You will get all the list of Changelog tables Along with below mentioned data
PSA
Version
To
Valid from
Object Status
Technical ODS name
Program Name
Maint Program
Object Name
Last changed by
UTC Time Stamp in Short Form
Partition number
Regards
Raj

Where to see the images other than change log table

Dear all,
How to view images for extraction's (example Generic ) in DSO without using Change log table.
With Regards,
Baskaran

Hi,
There is no other option other than change log table to view the images.
in PSA..we will get only raw data..i.e...its non other than the data how its posted in source sytem.we can say..this is only copy of source sytem data.
after PSA,if the datasource is DELTA enabled(which can sustain NEW or CHANGED records-here only we get concept of IMAGES),we have to load this data only to DSO.from there after activation of the data,the data can be updated to further data targets only from CHANGE LOG table which can maintain images.
Even further targets are also DSOs,we will have to load from this DSO only.so we can see images only in change log table.
hope this is clear for you.
Regards
Ramsunder

Concept of the change document table BWFI_AEDAT ???

concept of the change document table BWFI_AEDAT and the use of the 60 day (user definable) parameter ???
does this table hold the time stamps for deltas ???
Could anybody elaborate on this ??
Was going through some of the posts and came across this...

Seems one of the 4 replaced positions is going to be filled after all
Sorry for this aside, couldn't resist

Can we change Condition Tables

Dear Experts,
can you please tell me can we change condition tables for SD example 017/018?
T code for this is M/04
Requirement is now i need to check the checkbox With Release Status..
Can anybody help me?
Sachin
Edited by: Sachin Bidkar on Aug 12, 2011 8:44 AM

Hi Max,
Thanks for the reply.
Actually my requirement is to change processing status through ME12 for purchasing info records
And My query is suppose i add this field in T681E, then will it allow to change the processing status in ME11/12?
Please guide me.
Thanks & Regards,
Sachin Bidkar
Edited by: Sachin Bidkar on Sep 23, 2011 2:36 PM

Dynamic Changes in Table control

Hi
is that possible to change the table control dynamically

Hi Rob
my requirement is data upload from Excel to table control is over now
some of my TL said that if i add more fields and records in that Excel than uplod the data to table control

How to find row changes in table

How can we find row changes in table and i want o find out any significant change in the row information in 11g db.

hi thanks for ur help
but i had one more problem
already i tried this one
at particular time i am getting that record
........................ col1 col2 col3 col4 col5
3/17/2012 11:55 AM 10 20 30 40 50
3/17/2012 12:00 PM 0 0 0 0 0
3/17/2012 12:05 PM 12 22 32 42 52
see here at 12:00 PM i got the null or zero values.so instead of null values i need consecutive record means below row like 12:05 row values i need
output is:
.......................... col1 col2 col3 col4 col5
3/17/2012 11:55 AM 10 20 30 40 50
3/17/2012 12:00 PM 12 22 32 42 52
3/17/2012 12:05 PM 12 22 32 42 52
its very urgent plz help to me.
Edited by: 913672 on Mar 17, 2012 6:35 AM
Edited by: 913672 on Mar 17, 2012 6:36 AM
Edited by: 913672 on Mar 17, 2012 6:36 AM

Web Service XML Changes Return Table Field Names

I am writing a Web service to return a employee information from SAP using .Net Connector. My Webservice XML changes return table column names with few escape characters. Does anyone know why this happens? and How to prevent it?
Every column name is changed: e.g. PERS_NO to PERS_--5fNO
NCo -> 2.0
RFC- > Custom Function module
RFC Return Type -> ZFPSYNC
VS.Net -> VS Studio 2003, ( C# Web service)
Here is part of XML document:
<?xml version="1.0" encoding="utf-8" ?>
- <ArrayOfZFPSYNC xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://tempuri.org/">
- <ZFPSYNC>
<PERS_5fNO>00100001</PERS_5fNO>
<PDS_5fEMPID>00054740</PDS_5fEMPID>
<SSN>001380261</SSN>
<NAME_--5fPFX />
<FIRST_5fNAME>Tuesday</FIRST_5fNAME>
<LAST_5fNAME>October</LAST_5fNAME>
<NAME_--5fSFX />
<PRIOR_5fNAME>Tuesday October</PRIOR_5fNAME>
<NICKNAME />
<CO_5fCODE>TAX</CO_5fCODE>
<CO_5fCODE_5fT>Tax LLP</CO_5fCODE_5fT>
<CO_5fCTRY>US</CO_5fCTRY>
<ORG_5fUNIT>50191687</ORG_5fUNIT>
<ORG_5fUNIT_5fT>Northeast Region Lead Tax</ORG_5fUNIT_5fT>
<EE_5fLEVEL>C1</EE_5fLEVEL>
<EE_5fLEVEL_5fT>Firm Director</EE_5fLEVEL_5fT>
<SRV_5fAREA>TAX</SRV_5fAREA>
<SRV_5fAREA_5fT>Tax</SRV_5fAREA_5fT>
<JOB_5fFAM>CS-TAX</JOB_5fFAM>
<JOB_5fFAM_5fT>CS - Tax</JOB_5fFAM_5fT>
<PER_5fAREA>BOSX</PER_5fAREA>
<PER_5fAREA_5fT>Boston-Berkeley St-TAX</PER_5fAREA_5fT>
<PER_5fADDR>200 Berkeley Street</PER_5fADDR>

Please install patch from OSS note 506603. This should correct the problem.

Changes in tables

Similar Messages

Maybe you are looking for