Changes in the RDF are not affecting the report
Hi All,
Greetings.
I have D2K which is working fine from a couple of years. we had encountered an error recently and we have found the cause of it in the formula column of the RDF and made changes accordingly. We are sure that the changes we made in the formula column will resolve the issue.But, the changes are affecting the output.What could be the cause for it?
The report is called from the form and the RDF is in the report server which is being called on pressing the button. We are sure with the location of the RDF file in the sever path.
We encountered the same problem with other report which is having the layout problem.
Do we need to restart the report server every time we made changes to the RDF ?
Thanks in Advance.
Regards,
Bhaskar
Hi,
do you seen the changes if you try to build a new report based on th emodified universe?
Regards,
Stratos
Similar Messages
-
Changes made in BOM are not reflected in Configurator.
Hi all,
When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
This program has 2 parameters one for folder and the other for Configuration Model Id.
When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
We don't have a separate instance for COnfigurator.
Do i need to do any set up so that my Configuration model is reflected in the LOV?
Can anyone please help me on this?
Oracle Apps version: 11.5.10.2
Configuration software build: 11.5.10.25.43A
Regards,
SreekanthHi Jason,
Please see my comments below
Jason said*
Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
Ex:
When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
Can you please explain this?
Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
Jason said:+
Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
a. A Model (PRJ = Project)+
b. The Model cannot be deleted (Deleted_flag must be '0')+
c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
Regards,
Sreekanth
Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM -
Changes to Excel files are not getting updated
File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Graphics(Styles) are not Affecting in HTML Format of Smart Form
Hi,
I have converted a Smartform from PDF format to HTML. but the Graphics ( Styles ) are not Affecting the out put.
Can any body Give me the solution.Please suggest me ,how to convert from pdf to html workformat,if any program is available for that.Please send it
-
Changes in backing bean are not considered for deployment
hi,
i'm not sure whether this is a jsf specific issue but..anyway, here's the case: I'm using eclipse ( lomboz) as ide and whenever i change something in my backing bean (let's say add a new method) it is not found after redeployment neither after clean command. after some startups the changes eventually are adopted. this is really annoying as just starting the server takes me half a minute. so if anybody ever had the same or similar problem or has any experience with hot deployment please sent me a clue.
regards,
jens>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport. Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing. The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape. -
Changes in development system are not excluded
Anyone had this issue in CHARM before ?
we have SLFN - SDCR - SDMJ open for a change.
Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
Business now wants to stop this change and close SLFN.
How can I close/cancel SDMJ ?
When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
Is there a way to force close SDMJ ?
Thank you
Elena>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport. Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing. The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape. -
How to track personal details changes in the report without using triggers on the database tables
Hi There,
I'm having a requirement to track the oracle HRMS Personal details changes in the report not using the triggers.
ex: if some changes the address of the person, then that changed values should be populated in the report.
Please find below query:
If any of the following columns data is updated, the new value should be populated in the report.
SELECT PAPF.PERSON_ID PAPF_PERSON_ID
, PAPF.EMPLOYEE_NUMBER EMPLOYEE_NUMBER
, PAPF.FIRST_NAME FIRST_NAME
, PAPF.LAST_NAME LAST_NAME
, TO_CHAR(PAPF.DATE_OF_BIRTH ,'DD-MON-YYYY') DATE_OF_BIRTH
, ADDR.ADDRESS_LINE1 ADDRESS_1
, ADDR.ADDRESS_LINE2 ADDRESS_2
, ADDR.ADDRESS_LINE3 ADDRESS_3
, ADDR.TOWN_OR_CITY TOWN
, ADDR.REGION_1 COUNTY
, ADDR.POSTAL_CODE POST_CODE
, ADDR.COUNTRY COUNTRY
, PAY.PAYROLL_NAME PAYROLL_NAME
, PLN_TYP.NAME PLAN_TYP
, PLN.NAME PRODUCT_NAME
, BOF.NAME COVERAGE
FROM PER_ALL_PEOPLE_F PAPF
, PER_ALL_ASSIGNMENTS_F PAF
, PER_ADDRESSES ADDR
, PAY_PAYROLLS_F PAY
, BEN_PRTT_ENRT_RSLT_F PEN
, BEN_PL_TYP_F PLN_TYP
, BEN_PL_F PLN
, BEN_OIPL_F BOIPF
, BEN_OPT_F BOF
WHERE 1 = 1
AND PAPF.PERSON_ID = PAF.PERSON_ID
AND TRUNC(SYSDATE) BETWEEN PAPF.EFFECTIVE_START_DATE AND PAPF.EFFECTIVE_END_DATE
AND TRUNC(SYSDATE) BETWEEN PAF.EFFECTIVE_START_DATE AND PAF.EFFECTIVE_END_DATE
AND PAPF.PERSON_ID = ADDR.PERSON_ID
AND ADDR.PRIMARY_FLAG = 'Y'
AND ADDR.DATE_TO IS NULL
AND PAF.PAYROLL_ID = PAY.PAYROLL_ID(+)
AND PEN.PERSON_ID = PAPF.PERSON_ID
AND PEN.BUSINESS_GROUP_ID = PAPF.BUSINESS_GROUP_ID
AND TRUNC(SYSDATE) BETWEEN TRUNC(PEN.EFFECTIVE_START_DATE) AND TRUNC(PEN.EFFECTIVE_END_DATE)
AND PEN.PRTT_ENRT_RSLT_STAT_CD IS NULL
AND PEN.SSPNDD_FLAG = 'N'
AND ( PEN.ENRT_CVG_THRU_DT >= TRUNC(SYSDATE)
OR PEN.ENRT_OVRIDN_FLAG = 'Y')
AND EXISTS(SELECT PIL.PER_IN_LER_ID
FROM BEN_PER_IN_LER PIL
WHERE PIL.PER_IN_LER_ID = PEN.PER_IN_LER_ID
AND PIL.BUSINESS_GROUP_ID = PEN.BUSINESS_GROUP_ID
AND PIL.PER_IN_LER_STAT_CD NOT IN ('VOIDD','BCKDT'))
AND PEN.PL_TYP_ID = PLN_TYP.PL_TYP_ID
AND TRUNC(SYSDATE) BETWEEN PLN_TYP.EFFECTIVE_START_DATE AND PLN_TYP.EFFECTIVE_END_DATE
AND PLN_TYP.PL_TYP_ID = PLN.PL_TYP_ID
AND TRUNC(SYSDATE) BETWEEN PLN.EFFECTIVE_START_DATE AND PLN.EFFECTIVE_END_DATE
AND PLN.PL_ID = PEN.PL_ID
AND PEN.OIPL_ID = BOIPF.OIPL_ID(+)
AND TRUNC(SYSDATE) BETWEEN NVL(BOIPF.EFFECTIVE_START_DATE,HR_GENERAL.START_OF_TIME) AND NVL(BOIPF.EFFECTIVE_END_DATE,HR_GENERAL.END_OF_TIME)
AND BOIPF.OPT_ID = BOF.OPT_ID(+)
AND TRUNC(SYSDATE) BETWEEN NVL(BOF.EFFECTIVE_START_DATE,HR_GENERAL.START_OF_TIME) AND NVL(BOF.EFFECTIVE_END_DATE,HR_GENERAL.END_OF_TIME)
AND (:P_SYSDATE) BETWEEN TRUNC(PEN.ENRT_CVG_STRT_DT) AND TRUNC(PEN.ENRT_CVG_THRU_DT)
AND (CASE WHEN :P_PAYROLL_ID IS NULL THEN 'Y' ELSE NVL((SELECT 'Y' FROM DUAL WHERE PAY.PAYROLL_ID = :P_PAYROLL_ID), 'N') END) = 'Y'
AND PAPF.LAST_UPDATE_DATE = (:P_SYSDATE) ;
--AND PAPF.LAST_UPDATE_DATE BETWEEN to_date(:P_SYSDATE) and (to_date(:p_sysdate) + INTERVAL '31' Day);
--AND (:P_SYSDATE) = PAPF.LAST_UPDATE_DATE ;
Thankscheck this -
Re: Best Event-Based notifications for Sox Complience? -
Doing changes to the report dynamically
hi
i am working on a report whichaccepts a report in selection screen and finds 'upload' function module available in it and replaces this with 'gui_upload' function module.
i have written code for commenting the existing function module and creating new function module i.e. 'gui_upload'.
can anyone let me know how can i implement these changes in to the report that i pass in the selection screen.
i.e. how ca i write these changes to the report.
thanks in advance.Hi,
Use the following logic.
PARAMETERS : p_prog TYPE reposrc-progname. " Report Name
*Check for Program Name in TADIR
SELECT obj_name object
INTO TABLE tb_tadir FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name LIKE p_prog.
Read the Program and Get all the Update/Modify or Insert Statement
*through which Z Tables are Getting Updated Directly
PERFORM read_program USING wa_tadir-obj_name.
FORM read_program USING wa_tadir-obj_name.
REFRESH tb_text.
Read the Report/Program
READ REPORT wa_tadir-obj_name INTO tb_text.
DESCRIBE TABLE tb_text LINES w_lines.
DO w_lines TIMES.
w_index = sy-index.
Read the table and search for MODIFY , UPDATE and INSERT
READ TABLE tb_text INTO wa_text INDEX sy-index.
IF sy-subrc EQ 0.
SHIFT wa_text-text LEFT DELETING LEADING space.
SEARCH wa_text-text+0(6) FOR 'UPLOAD'.
IF sy-subrc EQ 0.
Here write a routine to Replace UPLoad with GUI_UPLOAD.
ENDIF.
CLEAR wa_text.
ENDDO.
ENDFORM.
Thanks,
Shrikanth -
How to schedule the webi report based on data changes in the report data
Hello,
I want to schedule a webi report based on data change in a column in the report.
The scenario is something like below:
1. If a data of a particular column changes from 2 to 3 than I would like to schedule this report and sent it to users mail box.
I know how to apply alerts or schedule a report or data tracking for capturing changes in the report but I dont know how to schedule the report only for data changes.
Anybody done this before.
Thanks
GauravHi,
May be these links can help you:
http://devnet.magicsoftware.com/en/library?book=en/iBOLT/&page=SAP_R_3_Master_Data_Distribution_Defining_Change_Pointers.htm
SEM-BCS: Load from data stream schedule
Attribute Change Run -
Current Level : Report Builder 6.0.8.27.0
We migrated custom reports build on Report 2.5 to 6.0.8.27.0 on apps/db version
from 11.0.3 / 8.0.5 to 11.5.10.2/9.2.0.6. Platform was moved from HPUX to Redhat
Linux 4.
When we open migrated reports then original reports get converted and compiled
by Report Builder 6 without any problem. But once saved and when modified some
of the reports get corrupted and have 'REP-1057' error.
Anyone had any similar problem and found solution?
ThanksI have a .rdf file. When I try to open the same in Report Builder for 6i, nothing happens! It just does not open!
I tried to convert the report into .REX from unix - I get the following error
REP-1057: 'FAIAPXINROH.rdf' is not a valid Report Builder file.
But, the report is running fine from Oracle apps.
I need to open this .rdf to change somethings.
Any suggestions?
Regards,
Arun Tirumale -
Changes in the report are not appearing
Hello All,
I have the following command
Run_Product(REPORTS, 'tpd_subst_rep', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL) in the form.
I have changed the report tpd_subst_rep but I am not able to see the changes. Can any one please explain from where the old report is appearing?
I have senn the documentation which is telling that it will look tpd_subst_rep in a default path, but how to see what is the default path?Hi,
I'm using a later version so I am unsure as to whether the layout etc. will be the same.
I don't know if it helps, but I may have misled you. Do you have the Object Navigator? If I condense all my options, I'm left with Forms, Menus, PL/SQL libraries, Object Libraries, Built-in packages, Database Objects.
Go into 'Forms' (1st option), your module will be listed, open that using the + next to it and in the list that is displayed, one of the options will be 'Reports'. Then open that using + and follow my instructions as before to find the filename path. This will tell you whether it is referencing your .rdf or your .rpt. Presumably it should be .rpt, so it will tell you where that is being saved.
I then opened my .rdf and just used 'Save As' to save it with a .rpt extension, using the address path taken from the Forms property palette of your report. That should then save your changes and update the file in Forms. -
Contacts are not syncing on my MacBookPro, iPhone4 & my iPad.
On iOS devices, go to Settings>icloud, be sure each is connected to the proper icloud account and that the Contacts on/off switch is turned ON. Check a similar things on the mac (system preferences).
Also, contacts are listed as being either in the "iCloud" group or the "On My Mac" (or iPad, iPhone). Anything in the "On My Mac" (or whatever device it is) does not sync via icloud, only contacts in "iCloud" sync. -
Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.
Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
Changes made in Lightroom are not displayed in Bridge.
When I make changes to my jpeg or psd files in Lightroom 4.3, these changes are not displayed in Bridge.
I'v checked the appropriate box in Lightroom's Catalog Settings "Auotmatically write changes to XMP".
What am I doing that's incorrect?
Digitalmac.With the box <Auotmatically write changes to XMP> checked, it may take a while until Lr "gets around" to writing the changes to xmp.
To check directly do this: immediately after you made changes to an image (PSD or other) press Ctrl / Cmd + S (letter S on you keyboard), wait until the progress bar has finished and then check your image in in Bridge. -
Modified changes to ESS DC are not visible
Hello Experts,
I have imported the DC and checked out. I have modified essusfam~sap.com by adding a text field and input label. Saved all my changes and tried to deploy the code from the context menu in webdynpro explorer. NWDS prompts for SDM pasword and later I see the deployment sucessfull. But, the changes are not visible. Just want to know if I am missing any steps before deployment. or do I need to follow any more steps.
I am trying not to use NWDI deployment process
Thanks,
Sharath.Hi Sharath,
When building, choose project then right click and select build... from Development Component section.
Regards,
Raj
Maybe you are looking for
-
Can I install Creative Suite on more than one computer?
Hi, I have bought Adobe Creative Suite 6 Design & Web Premium, Student and Teacher Edition. I own an IMac and Macbook Pro. I have installed the Creative Suite onto my IMac. I have recently bought my Macbook Pro. Can I install the creative suite onto
-
Dear sir, Pleasant Morning sir, I have some queries please clarify the issues and do needful for us. I have been installed the windows 2012 server R2 versions in that server need to assign the domain name. Already i have the same domain name
-
Issues saving images from the internet!!!
I just got my iPhone 4s and I am having issues saving photos from Tumblr onto my phone. The tap and hold does not work, it doesn't come up with the menu at the bottom to save the photo, it just gives me the option to copy the photo which doesn't help
-
How to bring ALL option in Table prompt in OBIEE Answers result area?
Hi All, This is my requirement. For example, Please consider scott table. There is a column called DEPTNO. I am taking DEPTNO,DNAME,EMPNO,EMPNAME for display. If i edit the table and move this column DEPTNO to Table Prompt section. I am getting a dro
-
Just Installed 10.4.10 and...
I just installed OS 10.4.10 and my desktop/finder keeps restarting every minute. Has this happened to anybody? How in the **** do I stop this?