Changes in the repository not reflected in Catalog UI

Hi Experts,
I am facing issue with respect to above subject,i tried to find a solution in forums but,couldnot find suitable solution.
we are upgraded MDM Catalog from 2.0 to 3.0.
when i create a new field in MDM Console the same is not reflecting in Catalog UI to do OCI mapping.
The same is working in Dev system but,when i tried in QA not able to do OCI Mapping as the new field created is not available.
Please share your views to solve the issue.
Regards
Sunil

Hi Shiv,
Thanks for your reply.Now,we are able to map new field created in MDM in OCI mapping.But,when i login portal and connected catalog i am getting below error because of new field ('MDMSRM_VMI_STATUS') mapped.
However when i remove newfield in OCI,no error when connecting to catalog.
Please advise
Regards
Sunil
Root Cause
The initial exception that caused the request to fail, was:
java.lang.IllegalArgumentException: Field with Code 'MDMSRM_VMI_STATUS' does not exist in the table 'MDMSRM_CATALOG_ITEMS (T1) '
Edited by: PSUNIL on Jan 19, 2012 2:48 PM

Similar Messages

Changes in the Dimensions not reflected in the Current View and Excel Sheet

Hi Experts,
We're using BPC MS Platform Version 7.0.112 and we're having problems. When we make changes in the dimension members like adding members or making changes in the hierarchy or groupings, it takes time for the changes to reflect in current view or in the excel sheet. After full processing of the dimension we can see the changes we've made when we reopen the dimension member but when we try to use the member we've added in the template, it's not yet in the current view. I've already tried, full processing of all the dimensions, processing application and reassigning aql index, refresh dimension members and yet the changes we've made doesnt appear in the current view. And what's odd is that sometimes the changes we've made would appear after a day or two or nothing at all.
What could be possibly causing this issue?
Thanks,
Marvin

Hi Dzmitry,
Thanks for your response, I'm just wondering whats causing this? We never had this issue on older versions of BPC though, so it would really help if we would know the cause of this. Basicaly when do changes in a dimension, after processing (Full Process, System Offline and Process through member sheet), we just had to set the AppSet status to available and refresh the dimension members in Excel and all the changes would already be visible.
Thanks,
Marvin

Changes to subtasks are not reflected in the summary task

I use Project Professional 2013.
Changes to subtasks are not reflected in the summary tasks. This includes both work and actual work as well as % complete. The tasks are all auto scheduled. Is there a setting that I need to change?

The only way I know to make that happen is if calculate project after every edit is disabled (See Options, Schedule tab).
Does this happen in all project files, for other PCs near you and do you have SP1 installed for Project 2013?
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Why do the thumbnails not reflect changes I make to pages?

I am working on a pdf in Acrobat DC.
I am working on a page with all the layers hidden.
So the thumbnail is blank
When I show a layer it appears on the page.
The thumbnail however does not change.
Why do the thumbnails not reflect changes I make to pages?

Hi Jules,
The behavior is same in Acrobat 11 as well. The thumbnails do not get refreshed till you close the document and reopen.
Regards,
Rave

WEBDAV rules repository not reflecting the changes

WEBDAV rules repository does not reflect the changes unless i restart the application server. i dont have a problem with file repository because i can change the file repository using the link from the BPEL console and the changes are reflected immediately from the very next instance. .
But in case of WEBDAV repository, even if i change the rules , they dont get reflected in any of the further instances unless i restart the server.
Please help on this one.

Another observation is that the entire bpel process(with decisionservice on webdav repository) works even if the webdav server is shut down.
The webdav server needs to be up only for the first instance of the bpel process. After that, even shutting down the webdav server does not effect any further instances and they all run smoothly.
This shows that the decison service builds up some kind of cache on the first call of the decisionservice. Some way to destroy this cache everytime the webdav repository changes will solve the problem.
Any help on this topic is highly appreciated.

The change in model is not reflected to view

Hi,
I am using JDeveloper 10.1.3.3 with ADF Faces and ADFBC. I have Order and Orderline tables, related EO's and related VO and Viewlinks. When I test the model with AppModule Tester everthing works as expected. On the view part there is an ADF Form for Order VO and ADF Table for Orderline VO. In orderline there is a quantity field(af:inputText with autosubmit = true;) when it's changed the linetotal field is updated and ordertotal field is updated too. This logic is implemented in entity objects implementation. On the jsf page the change to linetotal field is reflected to view but the change to ordertotal field is not. linetotal and ordertotal fields both has Partial Triggers on quantity field.
On remove of orderline record I also update the ordertotal field and in this case the change is reflected to view. This should be a very simple issue. Any help is appreciated.
Best Regards,
Salim

Maybe you should run the code in an eventhandler for the event 'changed' of purchase order ?

Changes to password are not reflected immediately in the application

Hi All,
If I change the password either from the console or through the application
itself, the change are not reflected immediately. They are reflected when I
shutdown both the admin server and managed server and bring them up. I think
the previous password is cached somewhere. If so, how to refresh it. When I
am changing the programatically ie using
User.changeCredential(oldPassword,newPassword);
I am refreshing the realm by using RealmMBean.refresh() . But it is not
working. Right now i am using default file realm. Can anyone tell what i
am missing here
Thanks in advance
Suresh

Suresh,
If your custom user extends DefaultUserImpl then you can update the password
in that instance within the method User.changeCredential(...) as
Construct the userinfo object with the old password
Authenticate the user against the realm with the userinfo -- returns the
customuser
customuser.setCredential( ** new passsword**) (setCredential method of
DefaultUserImpl)
update the file/database
Hope this works.
-- Sunny
"Suresh Done" <[email protected]> wrote in message
news:3b4a4d7e$[email protected]..
Hi All,
If I change the password either from the console or through theapplication
itself, the change are not reflected immediately. They are reflected whenI
shutdown both the admin server and managed server and bring them up. Ithink
the previous password is cached somewhere. If so, how to refresh it. WhenI
am changing the programatically ie using
User.changeCredential(oldPassword,newPassword);
I am refreshing the realm by using RealmMBean.refresh() . But it is not
working. Right now i am using default file realm. Can anyone tell what i
am missing here
Thanks in advance
Suresh

Why is the bounce not reflecting volume changes in my bass track?

I am running Logic Pro 9.1.7. I have input a bass guitar directly through an Apogee Maestro 2 using the direct input setting. When I use the mixer, all of the functions seem to work fine on the bass track (fader, volume, plun-ins, etc), but when I bounce the track the volume of the bass is still at the original input setting even though it was materially reduced (-15 db or more) in the mix. All of the other settings in the mixer (fader, plug-ins, etc) appear to be properly reflected in the bounce. Only the volume reduction seems to be missing After some experimenting it seems that the bounce may reflect an increase in volume in the mixer over the original bass guitar input, but it is hard to be sure because Logic only permits a 6db increase in volume and the bounce is being played through iTunes, so subtle differences are hard to detect. But even a -50db reduction in the bass mix produces a lound and clear bass in the bounce at the original input level.. This problem is not present for any track that was input through a microphone.
I have searched in vain for an explanation. Software glitch? Some parameter not set right? Any suggestions greatfully welcomed.

The latter. I just recorded a bass track as an audio track along with tracks for guitar, banjo, harmonica, etc. (I bounce off line so playing along with the bounce is not possible.) The thing is that the other instruments I play are all acoustic, so they go on their tracks through a mic. The bass is an electric bass guitar, and while I have an amp and could mic it, it just seemed easier to put it on a track by plugging it right into the preamp, which has an "instrument" input setting as an alternative to the "microphone" input setting.
What is so screwy about this is that the normalize function in the bounce window should make proportionate adjustments to all instruments. At least that's what the owner's manual says it does. But what it seemed to be doing is treating the directly input bass and the microphoned instruments seperately. I usually record the bass track at a fairly high input so that I can clearly hear it in the headphones as I play over the previously recorded instruments and vocals. Then I rely on the mixer to bring down the volume of the bass to a more reasonable level in the final mix. But with the normalize function on in the bounce, the bass was still coming through in the bounce at the original input level or something very close to it. That would be fine if the other instruments were properly jacked up as well so that the bounce sound like what I heard through the mixing board, only louder. But what I got was a mix with all of the all the other miced instruments sounding just like they did through the mixing board and the bass blasting away at the original recorded level notfwithstanding the volume reduction on the mixing board. Very strange. I assume this is a software bug, but now at least I have a reasonable work around. Thanks again.

Metadata changes in Lightroom are not reflected in Premiere Pro C

Hello everyone. I am having trouble with my current workflow. I am shooting RAW with a Canon 7d using Magic Lantern. I use raw2cdng to transform the mlv(raw) files to cdng. I then use lightroom to color correct my DNG files. I use lightroom to save the new metadata info to my files. Those changes that I make are reflected in file explorer, but when I import the files to Premiere Pro using the MediaBrowser the color corrections that I made in lightroom are not being shown. What am I doing wrong? Why is Premiere Pro not reading my metadata info correctly? I appreciate all of your help.

Changes to custom VO not reflecting

Hello All,
I created a new VO which extends standard. I did a jpximport. First time it worked. But now when I make changes to the VO files, the changes, query and new attributes, are not reflecting on the OA page. The page is picking the old version. Saw the details through About Page. Apache was bounced a couple of times still no use.
Can anybody tell me if I'm missing out anything here ?
Thanks.

You can also use functional administrator responsibility.
--Shiv

QM03-Custom tab-Change to text field not reflecting-FG - XQQM-screen-0106

Hi,
I have a requirement to change the text field on a custom tab of QM03 transaction. Quality notification type is Z1 and the tab is "Checklist". Both are custom defined.
The existing text field is of 3 lines. The new text message is of 8 lines. When I did the changes on the custom screen 0106 in the function group XQQM, the changes are not reflected on the QM03 transaction's custom tab. Only first 3 lines were reflecting the change and rest of the 5 lines are not appearing on the screen.
Pointers on this will be definitely helpful.
Regards,
Mallika.

I had a similar problem, but it was with the message line. I found that with Web Forms, I had to issue the Synchronize; a second time, but in Client/Server Forms 6i, the first synchronize worked. Here is the code I used:
<pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy"> SYNCHRONIZE;
if Get_Application_Property(User_Interface) = 'WEB' then
synchronize;--first does not work on web
end if;</font></pre>
Let us know if this works.

Changes made in ECC not reflected to CRM

Just encountered a problem. As follows:
1. When a line item in a sales order in ECC is rejected with a reason, the changes are reflected back to CRM. Likewise, when the PO number field in the sales order is changed, the changes are reflected back to CRM. This is ok.
2. But when I make a change in the address fields (i.e. change the street) in the ship-to partner (on the header level) in the sales order in ECC, the changes are not reflected back to CRM.
Has anyone encountered this issue before and if so, what was the solution?
Will reward points...

Hello,
Check the inbound queue in CRM and outbound in R/3.
Prase

Changes in Active Directory not reflected in SharePoint user info

I have change the manager & name in Active directory but it's not reflecting in sharepoint. I found one command
stsadm -o migrateuser
   -oldlogin <domain\name>
   -newlogin <domain\name>
   [-ignoresidhistory]
But i don't want to do one by one i have many users is there any command for migrate all updated user information

The migrateuser command is really only when a user's ID changes. Making changes such as name and manager should still be reflected under the original ID. If the changes doesn't propagate, ensure that your User Profile Service Sync completed successfully.
Check for errors and address any you find. A successful sync will propagate the changes properly.
Start here:
http://technet.microsoft.com/en-us/library/ff382639(v=office.15).aspx
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Changes to HTML template not reflected in production

Hi All,
I am facing the following issue.
I have changed an already existing screen(HTML template) and published the service. It is working fine in development environment. This is now transported to production environment and the screen change is not reflected here. We have tried refresing the ITS buffer, but hasnt worked. Any pointers would be of great help.
Thanks,
Shruti

Hi Shruti,
did you check the changed template in the productive environment? Did the transport successfully reached the new system?
If the changed template is available please (re)publish the file on the new environment.
Regards,
Sabine

Field lables changes in ESS iView not reflected on portal

Hi All,
I am trying to customize the SAP ESS Address DC (webdynpro Java) for South Africa region as per the SAP OSS note (No: 1428933).
In order to incorporate the changes I have imported the ess/za/addr DC into NWDS. I have changed the label text as per the OSS note and deployed the DC but changes are not reflecting in the portal
I did some more test on Label text;
1. Removed the Label text property value from DC and deployed the application, when I run the application during runtime screen is not showing any label text message for the label since I made it to empty.
1. I added my custom text message to label text value instead of standard label text value and deployed the application, when I run the application during run time screen is automaticaly showing the standard label text value not my custom label text value.
I'm trying to figure out from where these field labels value are coming from? Theoretically it should reflect field lables whats given in webdynpro but thats not the case here.
From where Label field value is coming?. Help me out in this. Thanks,
Regards, Suresh KB

If you are just changing the field label the recommended approach is to do it through Web Dynpro UI personalisation. DO NOT user NWDI to change the source code just for field label change. The way you change through UI personalisation is locate the iView in portal content, and select preview of iView then use CTRL+RIGHT click mouse button on the field that you want to change the text, you will see properties of selected field in a popup window where you can change the default text. Once you change it, and apply the changes you will be able to verify you changes in the iView properties (additional properties will be automatically created for the change you made). Now check the personal data service under ESS role you should see the change.
Hope this helps
Siva

Changes in the repository not reflected in Catalog UI

Similar Messages

Maybe you are looking for