Changes in Usergroup not possibule
Hi All,
I am getting the short dump in sqo3 when trying to change the usergroups in SQ03 , by selecting standard cross client as query area
We had opened the Message with SAP and they respond that some SYSTXXXXXXX usergroups was assigned to more than one user.
They asked us to remove one of the user from that group, but i am unable to delete the user... is there any way to delete the user from usergroup.
Thanks,
Subhash
Hi,
Take the help of a Basis Person to remove the user from the User Group.
Generally for every module they create groups, such that the objects related to that module are accessable to them.
Regards,
Anji
Similar Messages
-
ON CHANGE OF is not working for the below case
Hi,
I had a problem with ON CHANGE OF as below
select * from vbap into gt_vbap where vbeln in s_vbeln.
loop at gt_vbap into ls_vbap where posnr ne '00010'.
on change of posnr.
endon.
endloop.
in gt_vbap i have only items 10 & 20 for a Sales Order No so in loop on change of is not triggering because remain line item
is only 20.
can anyone explain me how to solve itYou need not use ON CHANGE OF....
Try using this code:
SORT gt_vbap by posnr.
Get the index of record
READ TABLE gt_vbap into ls_vbap with key posnr = '00010'
transporting no fields binary search.
if sy-subrc eq 0.
l_index = sy-index.
Read from next line
add 1 to l_index.
Loop at internal table from next line after posnr = '00010'....
loop at gt_vbap into ls_vbap from l_index.
Write your logic in this loop
endloop.
endif.
Regards,
Santosh -
SAP CRM 7.0 WebUI: change history is not working
Hi specialists
Our change history is working - but only in SAPGUI.
I found no way to activate / customize it for the WebUI. The corresponding Assignment Block is simply blank.
On the other hand - in the SAPGUI its working like it is mentioned to do.
But it is getting better:
On our test system its working even in the WebUI.
On our prod. system not.
Does somebody of you have any advices/hints for me?
With best regards
Thomas
System: SAP CRM 7.0
2-Tier (test and productive system)
Problem occurs only on productive system in WebUIHi,
We are facing same problem for change history on webIC except that all changes to
business partner are visible only changes to contract account are not coming in change history.
for e.g if we changed incoming payment method using tcode CAA2 on ISU change is replicating
on CRM but change history is not showing changes made to incoming payment method.
i have already posted question but got no reply's
[change history is not updating on CRM webIC 7.0]
Following are the components & views which are being called for change history functionality on WebIC.
Component :
BP_HEAD
BP_DATA
View :
BP_HEAD/BPHEADOverview
BP_DATA/AccountChangeHistoryOV
Above view's are as per SAP standard and not modified or enhanced by us.
Thank You,
Sidh -
I set up iPhoto v9.6 to copy items to library. Now I would like to change it to not copy. Do I have to start completely over? I have 106GB of photos and tags in my library. Will I lose all that work? Originally I thought by copying items to library I would be making an exact copy of my originals and that would serve as a duplicate or backup copy. My originals are on my EHD#1 and my iPhoto library is on my EHD#2. But now I realize that I can not view my iPhoto library unless my EHD#2 is connected to my computer (duh!!) So now I would like to NOT copy times to library and I want to have the library in the Pictures folder on my laptop HD. So I guess my question is do I have to start completely over? Is there some way to salvage all the work I've done so far?
Yes you would have to start over from scratch.
But you should really think this through very carefully. Experienced users do not recommend iPhoto used in this mode, and with very good reasons. Among them
1. It's more work for exactly no gain
2. It's unreliable - especially - when the library is on one volume and the photos are on another. One change to the path between the files and the library and you'll be reconnecting every photo in the Library back to the database, one by one.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361 -
Change Pointers are not getting populated in BDCPV table.
Hi All,
I am trying to create IDOC for Activity type master - KL02 through change pointers. For that I have done following things.
Message type - COAMAS
1. Created Custom message type - WE81 - ZIN_COAMAS_TCSMOBILE
2. WE82 - Config for Mess Type and Idoc type combination
3. SCDO - Checked object type LSTAR and have required tables in that object.
4. BD61 - Activated Change pointers - Generally.
5. BD50 - Checked Active for ZIN_COAMAS_TCSMOBILE
6. BD52 - Added fields for I want to create Change pointers
7. BD60 - Message type and ref Mesage Type and function module config.
8. BD64 - Created distribution model for my Message type
After doing all this settings the change pointers are not getting created in BDCP and BDCPV tables.
Note - The entries are going in CDHDR and CDPOS table for activity which i change through KL02 for class LSTAR
Can anybody figure out what need to be done in this case?
Regards,
Gautam Joshi.Hi All,
Solved the problem myself.
In BD52 I have given
LSTAR CSLA KOARS
LSTAR CSLA LSTAR
LSTAR CSLT KTEXT
Here the data of activity are stored in TCLA and TCLT tables. So intially while doing config in BD52 I have given TCLA and TCLT table names.
But I debugged the KL02 and found that change pointers are not created for TCLA and TCLT table. further looking into CDHDr and CDPOS table I found that for COAMAS message type in these two tables table name was CSLAB.
CDPOS entry
LSTAR
3166442
119512890
*CSLAB*
2003166442 2400123120000101
KTEXT
U
--> BUT CSLAB is structure.
After putting these entry in BD52 the problem solved.
LSTAR CSLAB KOKRS
LSTAR CSLAB KTEXT
LSTAR CSLAB LSTAR
Regards,
Gautam Joshi. -
Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?
I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan -
Change document log not created for customer in Batch input/BDC
Hi Guys,
Change document log is created when you manually change the customer using XD02 but when run the Batch/BDC the values are Changed but the change document is not created.
Please someone can give me some hints?
Luca.Any update guys????
Regards,
guru singh -
"change" button is not visible in check status ?
HI,
We are under upgrade of SRM 4.0 to SRM 5.0 . In SRM 4.0 "change" button
is visible in check status even if shopping cart is under approval
state.
But in SRM 5.0 "change" button is not visible in check status if
Shopping cart is under approval state.
for this i have raised OSS message. SAP replied that "please increase the security level of the buyer from 1 (= no changes
allowed) to at least 2 (=low)."
please let me know where exactly i can change this settings?
Thanks
Venkatesh PHi Venkatesh,
Steps :
1) Go to SU01 of the buyer
2) Go to Personalization tab
3) Double click on Personalization object key 'BBP_WFL_SECURITY'
You will get a pop up for 'Authorization level for Authorization'
4) Here change the securtiy level from 1(=no changes allowed) to at least 2(=low)
<b>Reward points for helpful answers</b>.
Regards,
Andy -
I upgraded to iPhone 5 but when I back up the Cloud (both wifi and plug-in), changes to my notes, contacts, etc., that I've made on my iPhone are not updating in the Cloud
Hi Gorm019,
If you are having issues with Photo Stream, you may find the following articles helpful:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
Regards,
- Brenden -
0CML_DELTA : Change pointers are not active
Hi All,
I have successfully did the delta init without data transfer for datasource 0CML_DELTA and 0CML_DELTA_CAP. Now, While trying to load delta, I am getting an error "Change pointers are not active" for both the datasource 0CML_DELTA and 0CML_DELTA_CAP.
The position datasources are fecthing 0 records.
I have activated the change pointers in BD61, even though I am getting the same error.
Anyone faced the similar issue or have any clue about the problem.
Thanks in advance,
Pravender
Edited by: Pravender on Sep 30, 2010 11:09 AMI resolved it. I was activating change pointers in BD61. But fot CML we need to activate in SPRO--> SAP Banking --> Loans Management --> Basic settings --> Installation parameters ---> Define general installation parameters.
Then it will work.
Pravender -
My problem is simple: my recently changed Password does not work
my problem is simple: my recently changed Password does not work
Flash Player doesn't require a password so it's not as simple as you make it out.
Where exactly are you being asked for a password , and for what? -
I'm a Canadian wishing to publish interactive books for both the Canadian and US markets. However, I've heard that Canadians would/do not have access to these interactive textbooks. Has this changed? If not, is there any indication that it will?
US only at this time.
Apple doesn't discuss future plans, sorry.
As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html -
I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
David.Paragraph breaks are good for readability. ;-)
Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future. -
HRMD_ABA change pointer trigger not work for info type changes
Hi,
In change pointer for message type HRMD_ABA Certain changes to HR records like adding activity types to infotype 315, changing dates to infotype 0001, 0105 and 315 and adding/changing/deleting are not woking through change pointers.
We are are replicating those changes through RHALEINI program, so can anyone let me know how to customize in case of adding this info types to trigger automatically through change pointers.
Thanks,
MaraiHi,
Then check for change document created or not, if created then use SWEC to link it -
Handling Unit Change Document does not exist
I have created a Handling Unit and made changes to the Handling Unit. When I go into HUMO > GOTO > Chnge docs, the screen is blank. Further to this if I display the status of the Handling Unit, the change documents is not ticked. Basically, I would like to see all change documents relating to a Handling Unit. Your assistance is appreciated. Txs Poobie
Hi,
You've checking the @ correct place to see Change Documents but why you're not able to see those ?
Are you sure that you've changed HU?
Check if any 'Data Changed' exists in Tab-General Info of HU. If any Changed Date & By exists, then it should display in Change Docs.
Revert back.
Regards,
Anup
Maybe you are looking for
-
Photoshop CS2 won't install on MacBook Pro (Core2Duo)
I made the mistake of letting my new MacBook Pro copy the files and applications from my PowerBook G4 last night, and Photoshop failed to copy. I figured that was no big deal as I was purchasing another license for the new system anyway. Now that I'v
-
External table with Date Format
I have external table and in the file date format is YYYY-MM-DD. i want to insert date format mask in the create table command . the bleow command is getting created . But it is giving error when i use select command. CREATE TABLE XADV.XADV_test_EXT_
-
Have to reset PRAM on every reboot. Help
Hello, I have a new to me Mac Pro 3,1. I did a fresh install of Yosemite. I'm having a big issue. Every time I restart the machine, it boots to a blank grey screen. Then I have to reset the pram and it boots into the OS X Utility. When I select the c
-
How do I change white smoke on new tab back to the thumbnails?
There is something off with my New Tab feature instead of opening with my thumbnails, it opens to this website: www.trovi.com/?gd=&ctid=CT3326235&octid=EB_ORIGINAL_CTID&ISID=M3EB81D18-1C06-4618-A05F-EEA6AC2C6348&SearchSource=69&CUI=&SSPV=&Lay=1&UM=5&
-
Problem editing Billing Doc (error WVA 014)
Hi, I'm editing a billing document because of lack of info (missing export data). When I add this, I save and everything seems ok, but when I enter, a error appears and in my SAP inbox there is a error log saying: Update was terminated WVA 014: Item