Changes made by users in F-32 transaction in a perticular company code

Hello Guru's
Please answer my two queries I will assign points to you.
1) I would like to know how to find the changes made by users from Jan2008 to till date in particular company code in F-32 transaction?
2)How to find the changes made by users in particular company code for all customers like transaction XD02?
Both are related questions but our user wants to know transaction wise changes made by users.
please help me on this issue.
Regards
chandra.

Dear Chandra,
you can see the changes in Customer Master XD04 but you can't see all Customer at a time.
i am not getting what is the issue in your first point.
regards
radha

Similar Messages

  • Report of changes made by user to a material on a purticular date

    hi,
    i am working on report in which i have to display the changes made by user to a material on a purticular date.
    i am able to display he all fields but i want to 1 more field which is in tcode MM04 i.e. text field(which means discription of te action taken).
    i want to display this field plzz help me out as help will be deinftely rewarded.
    Edited by: Alvaro Tejada Galindo on Feb 21, 2008 1:45 PM

    it's possible that there will be no change document for it and in this case you will have an issue because you will have to directly check in the database or enhance this transaction with adding a change document in some customer exit or BADI.
    I wish you good luck
    /wg

  • Swing .............how to undo the changes made by user

    Hi,
    i have created a form in swing asking for the related information from user whose value i m taking in jformetted textfield.
    now i have placed two buttons there.
    one is Apply and second is Cancel.
    when user pressed Apply button all the changes made by the user must be set where as if user clicks cancel button all the changes made by user should be undo to previously set value.
    can anybody help me how this can be done and what code should i write in action performed method
    thanks in advance
    plz reply

    thanx.
    one more thing
    In my application,there is one Button called Option when u clicked on it.It opens up one internal frame where user is asked to asked to fill some parameters.
    1) Now how can i restrict user to create one more internal frame unless first one is closed.
    2) suppose i clicked option button and it opens up internal frame where i can set the parameters and closed it.If i again click on option then i want the parameter to have wht i just set.
    3) and how can pass those parameters value to my main frame from where i m calling internal frame
    Plz reply
    Edited by: neel007 on Mar 11, 2009 8:02 PM

  • SKF transactional values based on company code

    Can anybody let me know the logic how we can seggregate transactional value passed to statistical key figure based on company code or is there anytable where we can direclty find SKF transactions involved based on company code ?
    Need to upload SKF transactional figures from one SAP system to another.Hence require process for extraction and uploading of the same

    Hi Amogh
    Hope you are looking for actual SKF quantities posted. kindly check s_alr_87013611 CC report, I think on the lower part this comes. This time I am not in front of system so you please check.
    Regards
    Rajneesh

  • Inter company transaction between USA1 & USA2 company codes

    Hi,
    I want to create Inter company transactions between USA1 & USA2 company codes.
    Will you pls tell me where is this configuration has to set up.what is the procedure...
    Company code USA1 has a customer #42209 with trading partner USA2 & the vendor name is XYZ Holding  for USA2 company.
    Company code USA2 has a vendor #102972 with trading partner USA1 & the vendor name is ABC Industries, Inc. for USA1 company.
    Thanks
    Rafi

    Hi
    Please go through the below documents:
    Cross-Company/Inter-company transactions
    Inter Company Reconciliation in ECC Versions
    Regards
    Sowmya

  • Could not find the log in SCUL for changes made into user.

    Hi,
    We assigned role to user in prob system in CUA .
    I cannot find who has made those changes into that user.
    I have looked in SCUL but could not find it. I did not find any changes in SUIM.
    Can anybody help me hjow can i find who has added that role.
    Thanks Rajesh
    Edited by: Rajesh Nanda on Apr 1, 2009 12:10 AM

    Hi Rajesh,
    this is the normal behaviour. The user gets changed in the CUA-child system by the user who is used in the RFC-connection form CUA master to cua child. Only in the case you use a trusted/trusting RFC connection, the user who performs the changes in the central system connects also to the child systems. Only in that case you will find the 'real' user as changer in the child system change docs.
    With SAP note # 1079207 new change documents are delivered for the CUA-case. To evaluate that changedocs you can use the new report rsusr100n (Ithink ,that it is still not integrated in SUIM until now, so you have to start it in se38,...)
    b.rgds,
    Bernhard

  • Transaction OAYH (to link company code to depreciation area)

    Hi All,
    I defined two new depreciation area for a particular chart of depreciation say 15 and 30. for a particular company code i want to change the currencybut when i go to transaction OAYH i can only see depreciation area 01, while 15 and 30 are not seen.
    please suggest how to get depreication area 15 and 30 for a particulare company code.
    Thanks and Regards
    Reena

    Hi,
    Please make sure that, for your new depreciation areas, the below were maintained or not.
    1) Transfer of APC values from 01 area (OABC)
    2) Transfer of depreciation terms from 01 area (OABD)
    3) new areas must be REAL depreciation areas
    Regards,
    Srinu

  • Copy Transactional Data from One Company Code to Another

    Hi Gurus,
    I have a peculiar requirement.  Searched thru the forums but did not got any clue.
    My client wants an Existing Company Code (ABCD), that is in use since past 2 years and have sizeable chunk of Transactional Data to be stopped for use.  The requirement is to stop using the existing Co Code ABCD and Transfer all the Transactional Data to a New Company Code (WXYZ).
    Any clues how to achieve this.
    Many Thanks...

    Thanks for your revert.
    is there an easier way to de-associate the Co Code from the Chart of Accounts.  I will have to convince my client on using the Same Co Code with different CoA, hope they should be fine.
    I believe I will have to go thru the detailed process of Resetting Transactional Data for Co Code, even this would be massive.
    What would you advise?
    Thanks Again...

  • 2008 R2 server running off Hyper V is reverting changes made by users to directories/ files that are moved.

    We have a Windows 2008 R2 file server ( running off hyper V)
    It has intronis and backup exec installed for backups. 
    Users are creating folders on the server and moving files, and sometimes ( not every time but about 20% of the time) the changes they made/ folders they setup will be gone and the files are back in the original directory they were in the day before. 
    There are some NTFS errors ( Event ID 55) that say to run a chkdsk, 
    which we have done ( chkdsk /r ) 
    But we are still having the problem. 
    Should we just replace the drive? There is not much on google about this type of problem anyone run into anything like this before?
    Thanks for any suggestions. 

    Hi,
    Do you restore the drive from backups? Do all the folders and files have the same issue in the drive or only some specific folders and files? Does the issue occur instantly? 
    You could refer to the article below to troubleshoot the event ID 55 error.
    EVENT ID 55: When Good Bits Go Bad
    http://blogs.technet.com/b/askcore/archive/2012/05/09/event-id-55-when-good-bits-go-bad.aspx
    Best Regards,
    Mandy 
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How can i save changes made to user accounts?

    Hello everybody!
    Well, this is my very first question to the community and i really hope you guys are able to help me!
    Now my problem is as followed: On my MacBook Pro i use an Admin Account for personal usage, and then i got a Guest Account for everybody else than myself using my Mac.
    A few days ago i spent almost an hour setting up my guest account in appearence and other general settings, i.E. the trackpad reaction or multi touch gestures. Afterwards, i logged out my guest account and shut off my mac. Then, another day afterwards i restarted my mac and checked, if those changes took effect. Now, surprisingly, the Guest User account was completely resettet and used something what looks to me like a standard setup.
    How can i change this? How can i set up a Guest Account with certain rights, a specific wallpaper and only selected apps available?
    Thank you for your help and have a nice day!

    That is what the Guest User account is for - did you see this when you logged out of the Guest Account?
    What you need to do is to set up a new account that is not the system installed Guest Account with a name of your choosing.
    Regards.
    Colin R.

  • GMS Admin console: Changes made by user not being saved

    Hi,
    with GMS 2.0.1 and groupwise for auth and provisioning, users can log in to the gms admin console with gw credentials just fine. but if the user tries to save changes in the groupwise settings, changes won't be applied.
    Code:
    "An Error has occurred!"
    what's weird is the fact that changes will be saved under device settings.
    i assume this must be a rights issue in the groupwise connector.
    what has to be done to get this working again. users need to be able to adjust their settings by themselves.
    thx

    bahsig,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • User exit for different Material Document for different company code

    Hi,
    We want to have different no. range for Material document (GR) for different compnay code. Presently we have no. range at client level. Can we do with any userexit. If so pls. give the details.
    Regards
    Sai Krishna

    [user exit for generating external serial;
    [BADI MB_DOCUMENT_BADI;
    [user exit or any other enhancements during good receipt;

  • Restrict users with the same company code

    Hi All,
      I have developed editable ALV which allows users to edit and delete records and save those changes in database.
    Input is Company Code , Document Number and Fiscal Year.
    Now I want to restrict multiple users trying to edit/delete records with same company code at a same time.
    Example:
    User A is editing records for company code 1250.
    If User B tries to access for same company code 1250 at the same time, it should return an
    error message saying “Table currently locked by User A”.
    and also want to restrict the records if multiple users are trying to edit/delete the same record at
    a same time,I should give an error message.
    Thanks,
    Arpita

    First perform some search on Lock Concept in online help (ABAP Programming (BC-ABA), The ABAP Programming Language, Saving Data Externally, Data Consistency, The SAP Lock Concept or The SAP Lock Concept (BC-CST-EQ), SAP Lock Concept)
    Then use or create thru SE11 a lock object for your table (keys must start with mandt + Bukrs, to not interfere with standard locks, e.g. EFBKPF, you may create your own z-structure and an associated lock object) and before reading data check the company code is not yet locked with ENQUEUE FM, release the lock is either implicit at end of transaction or triggered thru DEQUEUE FM or COMMIT/ROLLBACK WORK (depends also on your choice on _SCOPE Parameter value).
    Regards,
    Raymond

  • How to change company code in cost center master

    Hi,
    Can anyone throw me the light about how to change company code in cost center master? User make some mistake. They maintained wrong company code in cost center master and there are some transactions already posted to this cost center. I would appreciate all attention and point will be reqard. Thanks much
    Best Regards,
    Bird

    Hi,
    The cost center master data fields have time dependancy.  Following are the details of time dependancy.
    You can maintain master data for cost centers, cost elements, activity types, and business processes as time-based. Changes to any other time interval are possible at any given time. Data storage is also time-based. In this way, you can store multiple database records for a master data record, each holding different information.
    The time-based dependencies are determined by SAP and cannot be changed. The following dependencies are possible:
    Not time-based
    Day-based
    Period-based
    Fiscal Year-based
    Cost Center's company code field's time based dependancy is Fisal Year Based and hence, the company code can be changed on cost center only on new fiscal year.  And hence, system will not allow changing company code on cost center master data until new fiscal year if transactions are posted to the cost center.
    You may have to think of work around :
    1) Create new cost center with correct co code
    2) Repost the cost posted to old cost center (with wrong co code) to the new cost center.
    Explore the possibility of this work around on your system with the key user and then see whether this option works out.
    Hope this helps.  Pls. assign points if this is helpful.
    Regards,
    Chirag

  • How to change chart of account to company code

    Dear  Guruu2019s
                                 I am new  SAP  FICO . I got the following thread  . I have configured the company code through copy the existing company code. Now I  want to change the Chart of Account to this company code. I gone to T code  OB62  from position go to my company code I changed the chart of account  but while saving the file I got thread  u201CReset company code data before changing the chart of accountsu201D
    How to go further could anybody explain me.
    Thank you in advance
    krishna

    If you really want to allocate a different chart of accounts to the company code, first of all reset the company-code specific data for the old chart of accounts.
    1. First of all you must, if it exists, reset the transaction data for this company code.
    2. Finally, carry out the resetting of the company code-dependent G/L account master data (without the general master data).
    Note:
    When dealing with large quantities of data, resetting the master data or transaction data can be very time-consuming. In this case, it is advisable to schedule the running of these reports as a batch run.

Maybe you are looking for