Changes Made in ACR....

When I edit a picture out of Bridge into ACR
.The changes don't show up in Lightroom.
How can I change this?
-Bridge CS6
-ACR 7.1
-Lightroom 4.1

AudoWarp wrote:
Where do I set Camera Raw preferences...?
In Bridge? Under the Bridge menu, just above General Preferences should be a menu item called Camera Raw Preferences...

Similar Messages

Bridge Preview Images not showing changes made in ACR

Suddenly my raw (Nef) files in Bridge are not reflecting the changes I make to them. In other words after downloading from my CF card, I work on raw files in ACR either one at a time or sometimes applying changes across several pictures. The changed files show up in Bridge briefly and then revert back to the unchanged looking raw. All changes actually exist because if I open the file in ACR or PS they appear just fine. In Bridge however, no changes including cropping, etc. show up. When I open Bridge the files are fine for a moment and then they revert to the uncorrected raws. I can also go to View and hit "refresh" and they will all show the proper changes for an instant and then revert to the original state again.
I've tried resetting preferences, purging and rebuilding cache, deleting temp files, removing and re-doing xmp files, expanding cache size and all the various rendering options in Prefs. Nothing works.
I cannot use the Bridge Light box or Preview function to compare photos because the corrections I made aren't there to be seen. The only way to see them is to open each file one at a time in ACR. This problem has forced my workflow to a crawl as I have to edit one pic at a time without being able to compare two together. Any help would be appreciated.

Hi All:
I had similar problems plus constant crashes that made Bridge unusable.
It drove me to try alternatives to bridge and to try Lightroom. I like
Lightroom better than bridge but it has an operational limit that leads me
to be reluctant switch. But here is the rub, now Bridge is working
perfectly! What I think fixed Bridge is running a disk/registry cleaner
called Ccleaner multiple times. I ran it almost every day for a week. It
found lots of stuff in my registry that it didnt like but as time went by
it found less and less. It also let me turn on or off services that run at
startup. I shut off anything that I could see that I didnt need, like
Adobe downloader; I dont need automatic downloading, as I can do it
myself. The result is at some point Bridge started to work again. It has
stayed working for more than 2 weeks now without one crash. I dont know
what was fixed that did the trick but so far Im happy. Ccleaner is a
free program and can be found at http://www.ccleaner.com/. Its a live
program as there have been several updates since I started using it. Try
it; I think it worked for me.
John Passaneau
PS
After Bridge started to work again, I had to purge the cache and rebuild
it. I use cache distributed to folders as I keep my photos on a network
attached drive and access them from 2 computers and a local cache will not
work for me.

DNG changes made in LR4 not visible in LR3

I am working on a MacBook Pro with both Lightroom 3 and Lightroom 4 installed. I wanted to test my assumption DNG is a DNG and that changes made to a DNG in LR4 would be visible in LR3, so I made changes to a DNG in Lightroom 4, clicked Update DNG Preview and Metadata and then exported that file as a DNG. I imported that DNG into a different Lightroom 3 catalog and the changes were not visible, even after choosing Read Metadata from File. Those same DNG changes were not visible in Bridge either. The changes are visible in the Finder, but not in Preview. Anyone know why and how I can make Lightroom 3 recognize the DNG changes made in LR4?

Your DNG is original-image-data + an adjustment recipe stored as metadata that tells LR how to display and export the image. Your DNG does not contain adjusted image data like a TIF or JPG would.
Your adjustments are probably in Process Version 2012, new to LR4, and only understood by LR4 and ACR 6.7/ACR 7.x and newer. The embedded JPG preview in the DNG is what LR4 put there.
There is a difference between a DNG being understood as a valid raw file by older Adobe products which it can, and those older products knowing how to interpret the adjustment recipe, which they can’t.
Specifically, LR3 doesn’t know how to interpret PV2012 adjustments, since it was last updated in 2011 and only knows about PV2010 and earlier.
Other non-Adobe programs, like Finder, can only see the embedded JPG preview which is the LR4 rendering, but LR3 re-renders the image using its own interpretation of the settings it can understand.

Camera Raw not seeing changes made by DPP

I am not sure whether this is a procedure problem or capability.
When I edit a (canon 50D) CR2 file in Canon DPP ver 3.6.1.0 and save it as a CR2 file, then open the same CR2 file in camera raw ver 5.5 it does not see any changes made by DPP it opens up the file as an original. All changes made by DPP are gone.
So my question is, is there a way for camera raw to see and use the changes made by DPP.

Thanks Gabor
You have confirmed my suspicion, I am aware that any changes made by DPP or most other software to raw files is only recording changes and not actually applying the changes until it is converted and saved to another format. Was hoping that ACR would be able to read the changes.
The reason I wanted this is I find that DPP does a better job removing noise from high ISO images then ACR, but I prefer the rest of the editing features of ACR, so what I hoped to do was to use DPP to remove noise and finish editing in ACR.
Was just a though, thanks for the help.
Boris

Why don't changes made in camera raw with the adjustment brush carry into photoshop?

Why don't changes made in camera raw with the adjustment brush carry into photoshop?

Using the Open button in ACR to get to PS doesn’t create a PSD or a TIF, it just transfers the image in memory.
As has been asked, already, what are the precise steps of your workflow starting with your painting the adjustment brush strokes in ACR and seeing the image in PS without the strokes, and what exact versions of PS and ACR are you using?
Use Help / About Photoshop..., and Help / About Plug-ins... / Camera Raw...

List view web part not reflecting changes made to list view in SharePoint Designer

Dear All,
When adding a list view web part containing a view modified in SharePoint designer (e.g. conditional formatting applied, or group headers modified) I'm finding that the changes made in SPD are not reflected in the web part.
For example, I go into SPD edit a view, and the view appears correctly when I go back into SharePoint, however when I link to the view within a list view web part it results in losing the changes made in SPD.
Becasue it's a publishing page I'm unable to edit the contents of the web part in SPD.
I'm sure this is expected behavior but how do I get around this?
Thnaks,
MDB

Try below
http://stackoverflow.com/questions/19533998/sharepoint-designer-doesnt-show-anything-in-list-and-libraries-link
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/a63a1894-6b1d-420a-95dd-b6c546eab34d/updates-made-to-sharepoint-designer-2010-workflow-do-not-show-up-on-the-server?forum=sharepointcustomizationprevious
http://stackoverflow.com/questions/5959521/sharepoint-designer-saves-the-changes-but-it-does-not-affect
http://social.technet.microsoft.com/Forums/en-US/1e9a8c27-bbc5-4a6f-8daf-4b243182f543/changes-in-sharepoint-designer-2010-not-showing-in-sharepoint-server-2010-page?forum=sharepointadminprevious

ALV Grid: how to save changes made in an editable Grid

Hi,
How to save changes made bu the user in any of the editable cells in a ALV Grid?
Regards,
deb.

Hi,
If you are using the FM look at the following example code...
data: LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.<<<<<------
gt_layout-zebra = 'X'.
gt_layout-detail_popup = 'X'.
gt_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = i_repid
i_callback_user_command = 'USER_COMMAND1'
it_fieldcat = header
is_layout = gt_layout
i_callback_top_of_page = 'TOP-OF-PAGE1'
i_grid_title = text-h17
it_sort = gt_sort[]
i_default = 'X'
i_save = 'U'
is_variant = gt_variant
it_events = gt_events
I_GRID_SETTINGS = LC_GLAY<<<<<<------
TABLES
t_outtab = itab.
clear itab.
Form USER_COMMAND1
FORM USER_COMMAND1 USING u_ucomm LIKE sy-ucomm
us_selfield TYPE slis_selfield."#EC CALLED
case u_ucomm.
when '&DATA_SAVE'.<<<<<<<<----
This will come after the data was EDITTED and when SAVE was clicked by user in output scren.
Here now in the final internal table(ITAB) you can find the data changed in EDIT mode.
After this you can do manipulation what ever you want.
Thanks.
If this helps you reward with points.

IPhone using Exchange slow to sync changes made in Apple Mail

I searched but didn't see anyone with this particular problem.
When I make a change on my Mac in Mail, say deleting a message from my inbox or moving to another folder, it usually takes hours before that change finally syncs and shows up in my iPhone.
However, there is no problem the other direction. If I move or delete a message on the phone, the change shows up on my phone within one minute.
Any idea why this would be? I hate having junk I've already deleted still on my phone for hours before it goes away! Anyone else seen this issue? Thanks!

However, there is no problem the other direction. If I move or delete a message on the phone, the change shows up on my phone within one minute.
Do you mean a change made on your iPhone is reflected with the Mail.app on your Mac within a minute?
I don't access an Exchange account. I have no problem with this in either direction with my MobileMe account.
Are you accessing your Exhange account as an IMAP account with the Mail.app on your Mac and are you are accessing your Exchange account via ActiveSync with the iPhone's mail client?
If so, not sure this would make any difference, but it might.

How to Track the changes made to the custom table field value

I want to track the changes made to the custom table field value in table maintenance generator.please help me it is very urgent
Thanks & Regards,
Kranti

Hi Satya,
These are the steps you've to do.
1. Enable the change document flag in the data element level for the fields of the tables you want to monitor.
2. Go to transaction SCDO. Create a new change object, and add your table to this object. After generation, you'll get a function module.
3. Call this function module in the table maintainence generator screen, after the data is saved to the database table. This function module automaticallly writes the changes, with the old and new values, and the fields that were changed to the tables CDHDR and CDPOS.
4. You can keep track of the changes made to the table by monitoring these tables.
Regards
Anil Madhavan

Report for the changes made in Purchase Order

Hi Friends,
In my location, changes are made to the purchase orders as and when required. Is there any report which shows the changes made to the Purchase Orders?? I am aware of the Item changes option in the Purchase Order.
Thanks in advance..
Regards,
Phani

Hi,
You have to develope an own ABAP report for this, based on the change tables CDHDR and CDPOS
CDHDR - Header Change
CDPOS - Item Change
EREV - Version Change
Check the link
Purchase order change log
Regards
KK
Edited by: Kishore Kumar Galla on Apr 5, 2010 1:16 PM

Report for abserving changes made to the customer master and moniter

Report for abserving changes made to the customer master and moniter and detail
Please send with t. code.

Hi Dhari,
Well the requirement seems very simple but its not as simple as it looks.
i have an idea not sure whether it gonna work or not. you need to build a history cube as if i understand your requirement then for any selected period you wanna see the change in wage type or pay rate for each employee if any.
1. pick up an cube that builds on emp transaction data.
2. add the 0empoyee Md, wage type and pay rate from MD to the cube and fill the cube
3.so now every day or in scheduled time interval the MD will load and the corresponding the TD will be loaded to the cube.
4. create a info object say indicator and add it to the cube
5.while loading the data to the cube everyday in tranformation check if for same employee there is a change or not in the wage type and pay rate. If so set the indicator to 1.
4.now build one more cube for holding the changed records from this cube and call it say zhrchange
5. now pull the date, year and related emplyee information for the emplyee to the zhrchange for those with indicator 1.
6. before the next load happen, rememrbe to set the indicator to 0 before checking the conditoin in the transformation routine , so that only if the conditoin satisfy then only it will be 1 else it will be 0.
now the cube zhrchange has all the changed records with time stamp and you can base your query on that to get the changed values in specific time period
hope this helps.

The changes made in the WAD web template is not replicating on web browser

Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
thanks

Clear your browser cache also and see if the changes are visible.....
Arun

My account was accessed and unauthorized changes made by We R Wireless

I recently became a ware of a very serious issue and have been getting little assistance from Verizon. My account was password protected and had only 3 people identified as having the ability to make changes on my account. I received a notice from Verizon regarding a change made on one of my lines. Upon review it was an unauthorized change to add "Total Mobile Protection" to one of my lines for $9.00 a month. Also in this notice was a credit which I was entitled to for a $10.00 Active Promotion. I believe this credit was placed on the account so that the change might slip by unnoticed. When I looked into the change it was made by a Representative from We R Wireless in Ship Bottom NJ. I have never been to this store nor have I spoken with anyone ever at this store.
After calling the store and confirming my account was accessed and unauthorized changes made, I was told by the manager that an employee had in fact accessed my account and made those changes. I still could not understand how it was possible for the changes to have been made without my password. The activity certainly looked very suspicious and I figured it had to do with commission to the representative for adding the insurance plan. This was denied multiple times by the manager of the store as well as the District Manager. In the meantime I had received multiple emails from We R Wireless in their attempts to "Make this go away"
What came next was the most disturbing and upsetting part of this situation. I was told by the District Manager of WE R Wireless that my information they had collected years ago during a purchase of a phone and activation INCLUDING MY PASSWORD and that they had kept it in their system!!
WE R Wireless had shared my personally identifiable information and Password to my account with Sales representatives at the Ship Bottom WE R Wireless store and that was how they accessed my account!!
As you can imagine I have now been receiving multiple calls from The Director of Retail Operations, Musafa as well as the Director of Operations, Jimmy. They are attempting to sweep this under the carpet and it is inexcusable and unacceptable. The reason for this post is to WARN others who may have made purchases at anytime at a We R Wireless store that they KEEP YOUR PASSWORD and employees are given the Passwords and have made changes to accounts. I cannot believe that I am the only one that this has happened to and I am concerned this is a widespread breech and more importantly is ILLEGAL.
I will keep this Board updated with developments but can tell you so far Verizon has not been very responsive to my concerns but this is unacceptable and I am thinking of contacting the FCC as well as an Attorney. In this day and age of Identity Theft this situation must be addressed by Verizon whether or not this was one rogue employee or not our PASSWORDS and other Information should never be shared nor kept without our knowledge.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

I can only tell you that the Verizon rep from the Fraud department as well as Verizon's legal department contacted me and said under no circumstances are these companies to retain Customer Passwords. As you can see look at the potential for issues as evident in this situation.
As far as the FCC and their responsibilities this is directly from the website
The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories. An independent U.S. government agency overseen by Congress, the commission is the United States' primary authority for communications law, regulation and technological innovation. In its work facing economic opportunities and challenges associated with rapidly evolving advances in global communications
The agency investigates consumer issues such as Cramming which has occurred here if you go to the site you will see some of the recent fines for cramming levied by the FCC and it is a huge issue. A consumer does not get involved in legal fees the FCC is responsible to investigate consumer claims of fraud and regulates the industry. The Attorney General also takes this very seriously as well.
Cramming - Unauthorized Charges on Your Phone Bill
Cramming Settlement for Consumers Announced
Dec. 19, 2014: The FCC, along with the FTC and state attorneys general, announced a $90 million settlement with T-Mobile regarding unauthorized charges - commonly known as "cramming" - on phone bills.
Current and former T-Mobile wireless customers should review their bills and apply for refunds if they suspect third party charges were wrongly added to their bills at www.t-mobilerefund.com/
Sent from my iPad

Error message when I insert a div tag: Couldn't commit the changes made in Live View. Refresh the Live View and try editing again.

According to a web and support forum search, myself and another person, Chloe in the Dreamweaver Club forum, have ever reported this. Trying to follow along a Lynda.com tutorial, and the instructor isn't getting this error. Can't imagine why it's happening. I'd be very grateful for any help. I'm also getting an error dialog message:
DIALOG BOX:
While executing onClick in InsertFGDiv.htm, the following JavaScript error(s) occurred:
At line 687 of file "Macintosh HD:Applications:Adobe Dreamweaver CC 2014.1:Configuration:Commands:InsertFGElement.js": The object is not currently contained in a document.
This appears at the top of the screen:
Couldn't commit the changes made in Live View. Refresh the Live View and try editing again. [Refresh doesn't do anything.]

Try the suggestions here -
Index to Dreamweaver FAQ
The solution for Javascript errors is likely the one.

How to track changes made in the ERD in oracle designer

I want to track all changes made in my ERD in oracle 10g designer. Please suggest how to achieve it.
use case: An ERD was approved in design phase. Few changes were made by development team and now in Implementation phase I need to track what all changes were made from say 3-Jan-12 to 3-Mar-2012
Edited by: 909570 on Mar 5, 2012 1:14 PM
To add here:
Designer Version is 10.1.2.0.2.
1. In my project versioning of ER is not being used so ER Version diff is not an option for me.
2. In Reports, there are options for getting all entities, attributes which are created/modified in a period. But it seems it is not giving me correct results.
Edited by: 909570 on Mar 5, 2012 1:14 PM

Since versioning if off, there is no way to track changes.
You can get a rough overview of possible changes by looking at the audit attributes (date created, date modified) in the properties palette, but that is already mentioned in your point 2.
Basically, developers should comment what they added/modified.

Changes Made in ACR....

Similar Messages

Maybe you are looking for