Changes made in RFC is not reflected in data services

Hi,
I am using a data service based on SAP R/3 RFC in my view
In my RFC i have some import parameters
and some export parameters
and when place a data service which is based on this RFC on the view for the first time , I am getting the import parameters and export parameters correctly
but the issue comes
when ever some one make changes in RFC and activating it again.
those changes are not reflected in data service (ex: a new import parameter is added or a parameter name is changed in the RFC, this is not reflected in data service)
i tried with deleting the existing data service and creating a new data service based on modified RFC
but even iam getting the data services details as pervious one ( as old data servie which i used at firt time)
why this is happening
how to solve this issue
regards
Srinivas

Hi,
Yes you need to restert the J2EE engine. Because when you imort it first time then it holdes it in cache memory. It will not be updated untill you restert the server. You restert the server then try it , you will get the right result for updated RFC.
Thanks
Chandan

Similar Messages

Changes made to files are not reflecting

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.
SharePoint 2013
Please help.
Thanks
Pj

HI Alex,
Answers to your questions inline below:
So you are editing a file, modifying the content in there and saving it but the changes are being lost?
Ans: Yes.
1. Have you checked the file immediately after closing it to see if the changes lasted?
Ans: I am not sure, if I checked the files immediately after. I think the changes were saved properly because I didn't get any error.
I managed to print out a file with a new element on one day but on the next day in the same file, I saw that element was not there.
I sometimes open the files through the Newsfeed tab, does that matter? My understanding is that the system is going to the original location to open the file
2. Do the changes then disappear later that day at some point?
Ans: That is my understanding.
3. Does this happen just for those files?
Ans: So far I have observed it for two of the files only.
4. Do you have versioning or publishing enabled on those lists? Versioning will let you see who changed it when and approval or publishing might be hiding things?
Ans: Versioning is enabled, publishing - not.
When I go to check versions to see, if maybe someone overwritten my change and retrieve the previous version, there is no previous version with the changes i made
the previous day.
Thanks.

Changes made in EMS are not reflected in EMC

Hello all,
I realise that this is 2013 discussion, but I could not find a 2010 section.
My problem is simple: any change that I make inside the Exchange Shell is simply not reflected in the Console. It doesn't appear there. It can't be searched for. Nothing.
I'd like to know how to fix this. Exchange is very broken when it is operating like this, and I pretty much cannot do anything. Customer GALs are exposed to each other, etc.... because changes won't occur even though the shell says they have.

Hi
What changes are you making? Some changes do take time as replication etc. happens in the backend. Have you tried restarting the server? do you see any changes after that?
Please also check the Application log for errors.

Changes made in BOM are not reflected in Configurator.

Hi all,
When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
This program has 2 parameters one for folder and the other for Configuration Model Id.
When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
We don't have a separate instance for COnfigurator.
Do i need to do any set up so that my Configuration model is reflected in the LOV?
Can anyone please help me on this?
Oracle Apps version: 11.5.10.2
Configuration software build: 11.5.10.25.43A
Regards,
Sreekanth

Hi Jason,
Please see my comments below
Jason said*
Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
Ex:
When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
Can you please explain this?
Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
Jason said:+
Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
a. A Model (PRJ = Project)+
b. The Model cannot be deleted (Deleted_flag must be '0')+
c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
Regards,
Sreekanth
Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

Changes made from application are not reflecting in Database and vice versa

I am updating changes from my Application. However the data in not reflected in the DB. I logged in and can see no change. However, the changes are being reflected in the Application, even after a server restart. Any ideas on this ?? its wierd !!

SELECT   c.sql_text sqltext
    FROM v$session a, v$sqltext c
   WHERE a.SID = :session_id AND a.sql_address = c.address(+)
ORDER BY a.status, a.last_call_et, A.SID, A.username, C.pieceSQL_ADDRESS
SQL_HASH_VALUE
SQL_ID
SQL_CHILD_NUMBER
Check this to see the last executed sql in your database , make sure you connect to right database with right schema
Last executed sql

Changes made in jsp are not reflected

webpages are not reflected after modifying jsp pages
what i need to do??
thanks in advance

Hi
Thanks for your reply,
I am using CQ 5.5 and was installed service pack 2.
1. We make package from SVN or through maven build to the CQ dev server.
2. JSP changes perfect but /var/classes java files contains old code(i.e new JSP file complitation is not happening )
3. Only when we restart server, /var/classes reflecting with new code other /var/classes have old code only.
What is best procedure to re-compile JSP with out Restart server.

Changes made in address book not reflecting in itunes sync

I have made a bunch of changes to the groups in address book. removing groups, renaming groups, etc. When i try and sync contacts to my iphone in intunes, those changes aren't reflected. what can i do?

Hello,
Check to see that there if there is also an entry in the Previous Recipients directory. Click on Window in the menubar, and choose Previous Recipients. Any you want to remove, just highlight and click Remove.
More info, please.
Ernie

Changes in outline made from EAS are not reflected in EPMA dimension lib

I added member formulas to some members in the account dimension using Essbase Administration Services and save them, when i opened workspace, I didn't see the change reflected in my planning application though i refreshed database from workspace. Any ideas?

Hi,
Any changes made in EAS will not be reflected in Planning. And also if you refresh it from workspace/Planning, the changes made in EAS are lost.
If you want to apply any formula to a member in a Planning application you need to do it in Planning and then refresh it.

Changes to Derived Logical Column not reflected in Answers

Before I go off my rocker and stab myself with my IPhone lightsabre... :-)
I created a new logical column for an existing table in my BM, deriving from an existing column (a datetime field called ESTIMATEDCLOSE) as follows:
MONTHNAME(Sales.OPPORTUNITY.ESTIMATEDCLOSE) || ' - ' || CAST(Year(Sales.OPPORTUNITY.ESTIMATEDCLOSE) AS CHAR(4))
...which should give me something like "Jan - 2008". The problem is that it returned something like "2008/01/31 00:00:00" in Answers - completely unexpected.
I decided to start out small and try something simpler, changing my derived column to be only Sales.OPPORTUNITY.ESTIMATEDCLOSE. This returned "2008/01/31 00:00:00" in Answers - sort of expected.
Then I changed it to MONTHNAME(Sales.OPPORTUNITY.ESTIMATEDCLOSE). This also returned "2008/01/31 00:00:00" in Answer!!!
It almost seems as if a derived logical column is cached in some weird way and changes to the formula is not reflecting in answers. Thinking that something so simple must work and I made a simple mistake somewhere I have spend a good part of the past day playing around with this and trying every possible solution I can think of - no luck. The odd thing is that I would rename my logical column and this will be reflected in Answers, but changes to the derived expression is not reflected.
- I deleted the column and started all over - no luck
- tried creating derived columns using different datetime expressions or even just concatenating strings to each other - no luck.
- Restarted all the Oracle services, thinking it's a cach'ing issue - no luck.
- I rebooted the server - no luck.
Once, when I started out with only MONTHNAME(Sales.OPPORTUNITY.ESTIMATEDCLOSE) I got back correct values in Answers (Jan, Feb, Mar..) and I thought the problem was finally gone. So I added || ' - ' || CAST(Year(Sales.OPPORTUNITY.ESTIMATEDCLOSE) AS CHAR(4)) to the derived formula. Guess what, Answers kept on giving me back only the Month names, completely ignoring my updated formula.
Anybody else ran into this problem? Something so simple should surely work...

John,
Yes, cleared the cache (from Dashboard Administration) and also used nqcmd Call SAPurgeAllCache. Restarted BI Server. Still no luck.
I tried your formula and then only got back "2008/01/31" (just the date without the timestamp) - very strange.
Then I noticed the following amazing thing (by accident):
I started with a request in Answers that does not contain my derived column and then add my derived column to the report. The text would be all wrong in this column (Jan, Feb, March). Then I add the same column again to the report and the second added column will magically show the correct strings (Jan - 2008) !!! Even stranger is that the moment I added the same column again to the report, the text on the first column would also magically jump to the correct values (Jan - 2008).
I did a bit more testing and created a blank request and added my derived column as the only column - this time it will show the correct values immediately. It does seem like it's tied to the content already in the request. I went a step further and saved my buggy request and added it to a Dashboard - it worked perfectly in the Dashboard.
Must be something buggy here in Answers when working with derived columns. I'm on 10.1.3.4...

Changes made in symbol does not show?

Hi, I recently started working with adjusting a template with flash 8. Everything went smoothly except for one thing. I changed one certain symbol in my libray and when i exported the movie (after changing) i dont see the changes in my website. Other buttons, symbols etc immediatly show there adjustments and this just keeps on remaining the same? Anybody knows what to do with this? Please reply!

Hi,
I tried clearing the cache before. No success. The symbols that does not
seem to change are on the website. I searches the whole library and the
page i want to change i nowhere to be found (except for the symbols that
does not show the changes). I hope to hear from you (and anyone) soon!
2012/2/17 kglad <[email protected]>
Re: Changes made in symbol does not show? created by kglad<http://forums.adobe.com/people/kglad>in
Flash Pro - General - View the full discussion<http://forums.adobe.com/message/4213017#4213017>

RFC is not inserting the data

Hi all,
                I did File to RFC scenario. My problem is when i send message the message is showen as processed successfully in SXMB_MONI. But RFC is not inserting my data in a specified table. I couldn't found where i am wrong.
my sender strucure is:
<MANDT>
<WORKDATE>
<EMPLOYEENUMBER>
<CATSHOURS>
R3 table name is ZTESTCATSDB
My RFC source code is :
FUNCTION Z_POST_TEST.
""Local Interface:
*" TABLES
*"      CATSRECORDS_IN STRUCTURE ZTESTCATSDB OPTIONAL
*"      RETURN STRUCTURE BAPIRET2 OPTIONAL
data wa_cats like ZTESTCATSDB.
data wa_catdb like ZTESTCATSDB.
data ztab like ZTESTCATSDB OCCURS 0 WITH HEADER LINE.
loop at catsrecords_in into wa_cats.
    ztab-WORKDATE = wa_cats-workdate.
    ztab-empnum = wa_cats-empnum.
    ztab-catshours = wa_cats-catshours.
    append ztab.
endloop.
insert ZTESTCATSDB from table ztab.
commit work.
ENDFUNCTION.
                      Plese tell me any one where i am wrong it is very urgent for me.
Thanks,
Satish.

You should always check the system return code (sy-subrc) after any insert and update statement like this:
insert ...
if sy-subrc > 0.
message E...
else.
commit work.
endif.
Hope that helps,
Stefan

Populate ComboBox from database - NOT using Flex Data Services

Hi there,
We are using CF with Flex but are not using the Flex Data
Service. I'm very much a newb and I'm having trouble finding any
information on how to populate controles from a database without
using Flex Data Service. Any help would be greatly appreciated.
First I have a page... JobSearch.mxml that contains a combo
box that I want to populate with the job_id and job_title from a
MSSQL database.
In Flex in the RDS DataView I used the "Create CFC" Wizard
which generated "job.cfc" and "jobGateway.cfc". It also generated
"job.as".
The CF Function that selects the data appears to be defaulted
and called "load" and the .as function is called simply "job".
So, that all looks great. But I can't find any information on
what I need to have on my JobSearch.mxml to actually get this data
into the comboBox.
I did:
<mx:Script>
<![CDATA[
[Bindable]
public var jobData:job = null;
]]>
</mx:Script>
And then:
<mx:ComboBox
text="{jobData.job_title}"></mx:ComboBox>
But I'm being told "Type was not found or was not a
complie-time constant: job"
I guess I'm missing something, or doing something way
wrong... I just don't know enough of Flex at this point to know
what it is.
Thanks!
April

Using php or asp is not an option, as we are a Cold Fusion
House.
I was looking at an article on Ben Forta's blog (
http://www.forta.com/blog/index.cfm?mode=e&entry=1786)
and following his example I did this... only it doesn't work:
I'm very very new to Flash and we are using ColdFusion but
are not using Flex Data Services. I've been trying to figure out
how to populate a combobox from a database and I'm just not having
any luck.
My project is called "PreTraffic". I have my main file as
"JobSearch.mxml" and a folder under the root named "cfc" with a
file called "job.cfc".
job.cfc contains the following code:
<cfcomponent>

<cffunction name="GetJob" access="remote"
returntype="query" output="false">
<cfset var job="">
<cfset var results="">
<cfquery datasource="discsdev" name="job">
SELECT job_id, job_title
FROM job
WHERE status = 'O'
ORDER BY job_title
</cfquery>
<cfquery dbtype="query" name="results">
SELECT job_title AS label, job_id AS data
FROM job
ORDER BY label
</cfquery>
<cfreturn results>
</cffunction>
</cfcomponent>
And JobSearch.mxml has the following code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns="*"
layout="absolute"
backgroundGradientColors="[#ffffff, #d0d0d0]"
creationComplete="InitApp()">
<mx:Style source="style.css" />
<mx:Script>
<![CDATA[
public function InitApp():void {
jobSvc.GetJob();
]]>
</mx:Script>

<mx:RemoteObject id="jobSvc" destination="PreTraffic"
showBusyCursor="true" />
<mx:VBox label="Job History" width="100%" height="100%"
x="10" y="92">
<mx:Label text="Search jobs by"/>
<mx:Form label="Task" width="100%">
<mx:FormItem label="Job Name:">
<mx:ComboBox id="jobNameCB"
dataProvider="{jobSvc.GetJob.results}"></mx:ComboBox>
</mx:FormItem>
</mx:Form>
<mx:HBox>
<mx:Button label="Search"/>
<mx:Button label="Clear"/>
</mx:HBox>
</mx:VBox>
</mx:Application>
My Compiler thingy points to:
-services
"/Volumes/flexwwwroot/WEB-INF/flex/job-services-config.xml" -locale
en_US
and job-services-config.xml contains the following code:
<destination id="PreTraffic">
<channels>
<channel ref="my-cfamf"/>
</channels>
<properties>
<source>flex.pretraffic.cfc.job</source>
<lowercase-keys>true</lowercase-keys>
</properties>
</destination>
Well, when I run the app... the combobox is not populated...
Can anyone help with what I've done wrong?
Thanks!
April

Changes made in jsp pages not showing in weblogic 92

Hi:
I am using Weblogic 92.
I ran an ant script and it copy the ear file
to the following directory.
C:\bea92\user_projects\domains\Inquiry\autodeploy
This should autodeploy the application but it doesn't seemed to show the changes I made.
I also copy the ear file to the following directory:
C:\bea92\user_projects\applications\Inquiry
and
C:\bea92\user_projects\applications\Inquiry\autodeploy
The worst part is even if I delete the ear files in the above directory and when I restarted weblogic 92, in the admin console it still shows it and when I tried to delete it, it says the ear file was deploy autodeploy and you must delete it manually something like that.
But I already deleted it manually but it still shows in the weblogic console. This is very frustrating.
In weblogic 8.1 I didn't use autodeploy and I don't have any of these type of problems!!
I also noticed that in the directory:
C:\bea92\user_projects\domains\Inquiry\servers\AdminServer\stage\_appsdir_inquiry_ear
it contains an old ear file.
What are the directory I have to updated exactly with the new ear files for the changes to show up in the application?
Any help would be greatly appreciated.
Yours,
Frustrated
Edited by jadeite100 at 03/22/2007 3:38 PM

Hi, Shonda, I can find "Main Mode" for my Jdeveloper 9.0.5.0.0 at
Tools -> Embedded Oc4j Server settings -> Global -> JSP Container.
If you can not find this parameter as above, can you use the index search for "Jsp container" or full text search for "embedded oc4j"?
Anyway, I believe there is way to confirm / change this parameter. At a last resort, you might search for files that contains "main_mode" or "main mode", case ignored, so as to get a clue where this parameter is stored.
I have been using 9.0.3 oc4j for some time. If the main_mode is recompile, any change of my jsps is always reflected immediately.

IPhone 4 with iOS5; Changes in iTunes to music not reflected on iPhone.

It's really odd. I plug in my iPhone, open iTunes, make changes to playlists (add or delete, etc.) and add or delete actual songs to my iPhone (via iTunes), etc., but none of this gets reflected on my iPhone when I unplug from computer and open the Music app. When I open the Music app, all the old playlists and songs are still there. But when I plug the iPhone back into my computer and open iTunes and click on my device, all the changes are reflected (on iTunes after clicking on my device). I push Sync and let the phone Sync but it still does not reflect any of the changes when I unplug. What is even crazier is I go back to the iPhone and I can still click on songs to play them, even after I have deleted them through iTunes on my iPhone, and they no longer show up on my device through iTunes. Anyone have any suggestions?
This never happened prior to upgrade to iOS5 or backing up to iCloud.

I am just updating as I was finally able to get this to work. I went back and synced two more times with iTunes. The first time still did not make any changes to my iPhone. The second time, the sync hung (at least an hour later it was still syncing on step 5 of 5), but I "ejected" anyway. And this time the changes were reflected in my iPhone. I don't know why the first two Syncs did not make the changes, even though they Synced without issue.

Changes in Crystal reports are not reflecting after publishing

Dear SDN Mates,
We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
Can anyone please help me on this.
Thanks and Regards
Arun S

Hello Prathamesh,
After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
This is happening for all reports. Can you please suggest me on this.
Thanks and regards
Arun S

Changes made in RFC is not reflected in data services

Similar Messages

Maybe you are looking for