Changes made in the web report selection scree do not appear on webpage.

Hi
I want to add 2 checkboxes on a web page of a report. I have done the changes in R/3 ABAP report (Added checkboxes on selection screen) and also released the report for internet using SMW0 transaction. But these two checkboxes are not appearing on the web page in internet explorer.
Whenever I try to access the URL
http://www.abc.com/scripts/wgate?~service=webrfc&_FUNCTION=WWW_GET_SELSCREEN&_REPORT=ZWR_PO_DELIVERY&_TEMPLATE=po_selscreen
it redirects it to the URL below
http://www.abc.com/scripts/po.asp?SESSION=PRD:ebgwebap:0000.00f5.7e1af317.e4db&SELD_EINDT_LOW=26.04.2008&SELD_BEDAT_LOW=01.04.2007&SELD_BEDAT_HIGH=26.02.2008
What should I do so that these two checkboxes would start appearing on the webpage?
Edited by: Pratiksha Parab on Feb 26, 2008 11:28 AM

thats difficult to say without seeing the code in the template.
when you dont supply any _tempate value in the url, the system by default uses
WEBREPORTING_SELSCREEN template.
your po_selscreen may be a copy of this and modified to change the look and feel or something like that. compare these two and see whats causing the selscreen from appearing completely

Similar Messages

  • Time delay on seeing the changed data onto the webi reports

    Hello,
    I'm new to BOBJ and was hoping someone can help me with adjusting the time delay the reflects the changed data to the Webi reports.
    I have a user that would update a form on our EP.  Afterward, she would have to wait a while before she can see the changed data on our Webi reports.
    can you please tell me the default time lag and show me where I can change it if required?
    thanks.

    Thanks for the reply.
    Our BO is 3.1 SP4.
    We just implemented PBF (Public Budget Formulation) and our forms are running on NWCE server.  It's being written to our backend BW 7.01 SP8 server.  I was told by our users that after she updates some new information on the form, it takes a while before she can see it on the reports.  My understanding was the universe should see the updated data from our BW immediately after they refresh.  Just as you both mentioned.  But according to the users, its not.  there's a time delay.
    I'm going to test this myself if there's a delay.  In the meantime and suggestion would be helpful.

  • Changing values in the web report

    Hi All,
    For ex. I have the following scenario.
    I have a web report in which I have a table item which is displaying the query result. The user wants to have a facility to change the Key Figs, if they want, directly on the report, it means when the user runs the web report and if he says something to be changed, he will directly change the value on the report and will click something like a button to save the changed value back in the infoprovider.
    Is this something possible?I came to know that we can do this sort of things using BSP but I am not sure how to make the table item to accept some changes and how to link to a BSP Program.
    Could some one please help me in this..
    Best Regards,
    Nene.

    Nene,
    If you want to know if it is possible , here's how...
    1. Use a BPS layout ...
    2. Create a BSP layout for the same
    option 2 :
    Create a BSP page which has a textbox for accepting the value and a submit button.
    On clicking the submit button , based on the parameters selected by the user , update the ODS. Remember you cannot update the cube because it does not have overwrite capability. However , declare the cube as an export datasource and then call the function module for the data source and push in the data for the same inside the BSP page.
    Hope this helps..
    Arun
    Assign points if useful
    Message was edited by: Arun Varadarajan

  • Changes made in the PODCAST GET INFO window do not "stick"?

    When working with podcasts, changes made in the GET INFO window do not "stick" for newly downloaded podcasts? In other words the changes are not persistent for newly downloaded podcasts. I want the changes to apply to past, present, and future podcasts.

    thats difficult to say without seeing the code in the template.
    when you dont supply any _tempate value in the url, the system by default uses
    WEBREPORTING_SELSCREEN template.
    your po_selscreen may be a copy of this and modified to change the look and feel or something like that. compare these two and see whats causing the selscreen from appearing completely

  • HP Smart Web Printing Select Button does not appear

    Just started to use Smart Web Printing. The Select Button as shown in the help file does not appear on the screen. Instead, a small box "x Select area to remove" shows within the area to print.
    Printer: HP Photosmart C6380
    System: Windows Vista SP2 Home Premium
    Browser: Internet Explorer v9
    [email protected]

    Hi,
    The HP Smart Web Printing software is not compatible with Internet Explorer 9, you should unisntall it and upgrade to its replacement app HP Smart Print which compatible with your web browser:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02994297&tmp_track_link=ot_faqs/top_issues/en_u...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • BEx web report selection screen entries retain when closing and opening the report again

    Hello all,
    please help me in the below query.
    Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

    No...I think i can reframe the question very clearly......For ex:  we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
    Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
    I hope the explanation would be clear now.

  • Report for abserving changes made to the customer master and moniter

    Report for abserving changes made to the customer master and moniter and detail
    Please send with t. code.

    Hi Dhari,
    Well the requirement seems very simple but its not as simple as it looks.
    i have an idea not sure whether it gonna work or not. you need to build a history cube as if i understand your requirement then for any selected period you wanna see the change in wage type or pay rate for each employee if any.
    1. pick up an cube that builds on emp transaction data.
    2. add the 0empoyee Md, wage type and pay rate from MD to the cube and fill the cube
    3.so now every day or in scheduled time interval the MD will load and the corresponding the TD will be loaded to the cube.
    4. create a info object say indicator and add it to the cube
    5.while loading the data to the cube everyday in tranformation check if for same employee there is a change or not in the wage type and pay rate. If so set the indicator to 1.
    4.now build one more cube for holding the changed records from this cube and call it say zhrchange
    5. now pull the date, year and related emplyee information for the emplyee to the zhrchange for those with indicator 1.
    6. before the next load happen, rememrbe to set the indicator to 0 before checking the conditoin in the transformation routine , so that only if the conditoin satisfy then only it will be 1 else it will be 0.
    now the cube zhrchange has all the changed records with time stamp and you can base your query on that to get the changed values in specific time period
    hope this helps.

  • The changes made in the WAD web template is not replicating on web browser

    Hi,
    We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
    If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
    The changes made in the WAD web template is not replicating on web browser result.
    I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
    thanks

    Clear your browser cache also and see if the changes are visible.....
    Arun

  • How to change the folder name in the web report.

    hi experts,
    can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
    waiting for ur favourable response.
    thanks
    suri

    Hi Tony,
    Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
    thanks
    surendra

  • Changes made in the WAD web template is not replicating on web browser

    Hi,
    We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
    If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
    The changes made in the WAD web template is not replicating on web browser result.
    Thanks in adv
    pinky

    Just to add.
    WAD templates are stored as HTML in the HTTP cache.
    Whenever you make changes to the template - it is good practice to delete / invalidate the HTTP Server cache.
    This can be done from
    SMICM --> Goto (menu bar ) --> HTTP Server cache --> Invalidate --> GLobal
    ust to make this thread complete..
    However this is usually done for 3.x web templates since they run off the ABAp stack - not too sure about the JAVA stack - guess portal cache has to be cleared too..

  • How can we allow over 103,718 list of values to display in webi report selection?

    I know, why would we want to?
    Our business users would like to see the list ordered and first select from a range and drill down.
    Any query in information design tool already does this as well as the preview values for the LOV object.
    Is there a way to make large LOV function this way in webi query/report?
    If not, is there a way to move beyond the warning of 'Partial list'?

    These are all dependent parameters for LOV
    At BO Server level
    Web Intelligence Processing Server-> Maximum List Of Values Size (entries) - 50000 (default)
    Web Intelligence Processing Server-> List of Values Batch Size (entries) -1000 (default)
    At Universe level
    Array Fetch parameter at database.PRM file.
    Limit size of result set to --  parameter
    Query Level
    Max rows retrieved ( Click Query Properties to display the "Query Properties" dialog box.)
    You can try below steps
    Follow these steps to change the maximum size for a list of values:
    Log in to Central Management Console.
    Click Servers.
    Right click Web Intelligence Processing Server and select Properties.
    Increase the value of Maximum List Of Values Size (entries).
    Save and restart the Web Intelligence Processing Server.  Note: Setting large number for Maximum List Of Values Size (entries) may affect the performance of Web Intelligence. It is recommended to set the appropriate number according to the system performance.

  • Report data ( value ... tag) missing in the Webi report retrieved through RestFul Webservice

    I am trying the below URL to get the WEBi report from SAP BO using the Rest Webservice support that is now available.
    http://{serverIP:serverPort}/biprws/raylight/v1/documents/{documentId}
    I am able to get the report but as I compare the same report response when using SAOP Webservice, there seems to be a mismatch in the response. Here is what I see in the SOAP response:
    </td><td c="1" ><cell  ref="1.E.4t" bid="14" h="26" w="231" pad="6,7" sid="-10"><ct >Some arbitrary value</ct><value type="xs:string">Some arbitrary value</value></cell>
    But when I run it through REST, I am missing the <value ..> tag:
    </td><td c="1" ><cell  ref="1.E.4t" bid="14" h="26" w="231" pad="6,7" bt="1" sid="-10"><ct >Some arbitrary value</ct></cell>
    Apart from this right at the start of the xml response, I see some property mismatch as well.
    SOAP has this property extra:
    <property name="output.format.xml.valuemode">yes</property>
    While REST has these property extra:
    <property name="output.format.xml.option.style">1</property>
    <property name="output.format.xml.styledict.fontplatform">html</property>
    <property name="output.format.xml.td.bandinfo">yes</property>
    <property name="source.selected">data</property>
    <property name="xelement.xml.object">yes</property>
    <property name="xelement.xml.object.usemap">yes</property>
    <property name="xelement.xml.object.usersupportedformat">image/png</property>
    I am not sure if:
    the <value ...> tag miss is because of these missing/extra properties or
    current REST support has some issues
    For my application the value tag is a must and I can't do without this, but with REST it seems no way to obtain that.
    Any help or pointer(s) in this regard is appreciated!

    Hello Milind,
    According to our Product Owner Sam Polichouk, the solution should be available for you in 4.1 SP3, which is currently scheduled for release by the end of March 2014 (subject to change).  The product team recommends that you get the raw, unformatted data values from within the Dataset specific call.  This data contains a type to tell the end user what kind of data it is, so you can format it or use it properly.
    The updated documentation for the SDK will be available at SAP BusinessObjects Business Intelligence platform 4.1 – SAP Help Portal Page once the Support Pack is publicly released.

  • Error While Run the WebI Report on SAP BW Query

    Hi
    I have build the universe on SAP BW Query . I built the same universe on the SAP BW DEV and SAP BW Test
    When I tried to run the WEBI Report on the Universe which is built on the SAP BW Test
    WebI Report is prompting for the below values
    Calendar Year
    Profit Center
    Profit Center Hierarchy
    Version.
    Here I can see the List of values for the Calendar Year and Profit Center. Its giving me below error when I look  for list of values for the  Profit Center and Profit  Center Hierarchy.
    u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
    My Questions:
    1.     Why I am getting this error. Because of authentication or configurations set on the Profit Center and Profit Center Hierarchy objects? If so , please let me know what I need to set?
    When I tried to run the same WEBI Report  on universe which build on  SAP BW Dev Query. I can see list of values for the Calendar Year, Version, Profit Center, Profit Center Hierarchy.
    But when I selected the values and tried to run the report. I got below error.
    u2018Query 1 - P&L Structure Monthly_Devtst
    Database error: [SOFA Driver] : The MDX query SELECT NON EMPTY HIERARCHIZE( {[Measures].[4CEX5LZ5571LCZHJBK0L0360P],[Measures].[4CEX5MM6Q2UPWV3VT27LU9261]} )  DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON COLUMNS , NON EMPTY HIERARCHIZE(  { [0CALMONTH].[LEVEL00].MEMBERS }  )  DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [ZFIGLPCBM/ZZFIGLPCBM04_Q011] SAP VARIABLES [!V000001] INCLUDING =[0PROFIT_CTR                   1000HCICONS08] [!V000002] INCLUDING =2 [!V000003] INCLUDING =2008 [!V000004] INCLUDING =000 failed to execute with the error Value "0000000002" for variable "Profit Center" is invalid. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
    My Questions :
    1.     What is this error? Please suggest the solution to run the report successfully.
    Also I am attaching Print Screens of  DEV and Test  reports Prompts and Errors.
    Here I am using Business Objects XI R2 SP4
    I am sorry if I confused you with elaborated explanation, I have very less knowledge of BO and SAP BW .. 
    Please help me with your valuable suggestions.
    Thanks,
    Anitha

    Hi Ingo,
    - the BI Query in the Test system is running correct and all the variables do work ?
         Yes, BI Query is working fine in the Test System and I can see all the variables too
    In BI Query I can see values for  Calendar Year, Version, Profit Center, Profit Center Hierarchy
    - the Universe has all the variables ?
      Yes, Universe has all the variables.
    - do you see values in the Web Intelligence prompts when you run the report ? 
       No,
       I can only see values for the Calendar Year & Version  in the Web Intelligence Prompt.
    When I try to see values for the Profit Center & Profit Center Hierarchy in the Web Intelligence Prompt, its showing below error.
    u2018Database error: [SOFA Driver] : The operation completed successfully.. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)u2019
    I can send you the Print Screens of Prompts & Errors, but i don't know how to attach the file here.
    Thanks,
    Anitha

  • How to apply Table level Break in the WEBi Report

    Hi,
    How we can apply the table level break in the WebI Report.
    I know a bit bt i dont know its right or wrong.. Initally we normally create a table(with the values(which has 2rows(1: for naming  and 2: for associating the object with it at down of it  ie., one above and one below)) and at the top of that present table we will insert a "ROW ABOVE" to the naming row and then we insert a "Row below" to the object values  and drag the first coloumn of the first row almost invisible(naming row) and then the same in next row(objects associating values for naming)... is this ryt.. if NO  thn let meknow the various ways to do it..
    Thank you in Advance....

    Hi,
    what is your requirement. if to show subtotal then create one table and select one column and apply break.
    Thanks,
    Amit

  • Web Report - Selecting variable value

    Hi,
    I have web report, where one selection variable for company code is there.
    If i am running the report like compnay code 2000 it is working.
    The web report is having a facility to select multiple company code like >1000. Means before the text box to enter the company code 1000, there is another selection box where we can select =,>,< etc like that.
    If i am selecting > and company code 1000. Then report is not displaying any thing.
    But we have company codes > 1000 like 1001-1007,2000,3000.
    Could you please advise me what might be the wrong with this case.
    Thanks & Regards
    Srini

    One possibility would be that you are having a security issue. If you do not have authorization to see ALL companies > 1000, then your report will show no data (even if you do have authorization to see company 2000).
    Hope this helps...
    Bob

Maybe you are looking for